/*
 * Copyright 2019 The Hafnium Authors.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     https://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "primary_with_secondary.h"
#include "sysregs.h"
#include "test/vmapi/spci.h"

/**
 * QEMU does not properly handle the trapping of certain system register
 * accesses. This was fixed in a custom local build that we could use. If not
 * using that build, limit testing to the subset QEMU handles correctly.
 */
#define CUSTOM_QEMU_BUILD() 0

/*
 * TODO(b/132422368): Devise a way to test exhaustively read/write behavior to
 * all debug registers that does not involve a separate service per register.
 * This needs proper trap support as a starting point.
 */

TEST(debug_el1, secondary_mdccint_el1)
{
	struct spci_value run_res;
	struct mailbox_buffers mb = set_up_mailbox();

	SERVICE_SELECT(SERVICE_VM1, "debug_el1_secondary_mdccint_el1", mb.send);

	run_res = spci_run(SERVICE_VM1, 0);
	EXPECT_SPCI_ERROR(run_res, SPCI_ABORTED);
}

TEST(debug_el1, secondary_dbgbcr0_el1)
{
	struct spci_value run_res;
	struct mailbox_buffers mb = set_up_mailbox();

	SERVICE_SELECT(SERVICE_VM1, "debug_el1_secondary_dbgbcr0_el1", mb.send);

	run_res = spci_run(SERVICE_VM1, 0);
	EXPECT_SPCI_ERROR(run_res, SPCI_ABORTED);
}

TEST(debug_el1, secondary_dbgbvr0_el1)
{
	struct spci_value run_res;
	struct mailbox_buffers mb = set_up_mailbox();

	SERVICE_SELECT(SERVICE_VM1, "debug_el1_secondary_dbgbvr0_el1", mb.send);

	run_res = spci_run(SERVICE_VM1, 0);
	EXPECT_SPCI_ERROR(run_res, SPCI_ABORTED);
}

TEST(debug_el1, secondary_dbgwcr0_el1)
{
	struct spci_value run_res;
	struct mailbox_buffers mb = set_up_mailbox();

	SERVICE_SELECT(SERVICE_VM1, "debug_el1_secondary_dbgwcr0_el1", mb.send);

	run_res = spci_run(SERVICE_VM1, 0);
	EXPECT_SPCI_ERROR(run_res, SPCI_ABORTED);
}

TEST(debug_el1, secondary_dbgwvr0_el1)
{
	struct spci_value run_res;
	struct mailbox_buffers mb = set_up_mailbox();

	SERVICE_SELECT(SERVICE_VM1, "debug_el1_secondary_dbgwvr0_el1", mb.send);

	run_res = spci_run(SERVICE_VM1, 0);
	EXPECT_SPCI_ERROR(run_res, SPCI_ABORTED);
}

/**
 * Attempts to access debug registers for read, without validating their value.
 */
TEST(debug_el1, primary_basic)
{
	EXPECT_EQ(hf_vm_get_id(), HF_PRIMARY_VM_ID);

	if (CUSTOM_QEMU_BUILD()) {
		TRY_READ(DBGAUTHSTATUS_EL1);
		TRY_READ(DBGCLAIMCLR_EL1);
		TRY_READ(DBGCLAIMSET_EL1);
		TRY_READ(DBGPRCR_EL1);
		TRY_READ(OSDTRRX_EL1);
		TRY_READ(OSDTRTX_EL1);
		TRY_READ(OSECCR_EL1);

		TRY_READ(DBGBCR2_EL1);
		TRY_READ(DBGBCR3_EL1);
		TRY_READ(DBGBCR4_EL1);
		TRY_READ(DBGBCR5_EL1);
		TRY_READ(DBGBVR2_EL1);
		TRY_READ(DBGBVR3_EL1);
		TRY_READ(DBGBVR4_EL1);
		TRY_READ(DBGBVR5_EL1);
		TRY_READ(DBGWCR2_EL1);
		TRY_READ(DBGWCR3_EL1);
		TRY_READ(DBGWVR2_EL1);
		TRY_READ(DBGWVR3_EL1);
	}

	/* The following is the subset currently supported by QEMU. */
	TRY_READ(MDCCINT_EL1);
	TRY_READ(MDRAR_EL1);
	TRY_READ(MDSCR_EL1);
	TRY_READ(OSDLR_EL1);
	TRY_READ(OSLSR_EL1);

	TRY_READ(DBGBCR0_EL1);
	TRY_READ(DBGBCR1_EL1);
	TRY_READ(DBGBVR0_EL1);
	TRY_READ(DBGBVR1_EL1);
	TRY_READ(DBGWCR0_EL1);
	TRY_READ(DBGWCR1_EL1);
	TRY_READ(DBGWVR0_EL1);
	TRY_READ(DBGWVR1_EL1);
}

/**
 * Tests a few debug registers for read and write, and checks that the expected
 * value is written/read.
 */
TEST(debug_el1, primary_read_write)
{
	EXPECT_EQ(hf_vm_get_id(), HF_PRIMARY_VM_ID);

	TRY_WRITE_READ(DBGBCR0_EL1, 0x2);
	TRY_WRITE_READ(DBGBVR0_EL1, 0xf0);
}