/dts-v1/;

/memreserve/	0x0000000080000000 0x0000000000010000;
/ {
	model = "FVP Base";
	compatible = "arm,vfp-base\0arm,vexpress";
	interrupt-parent = <0x01>;
	#address-cells = <0x02>;
	#size-cells = <0x02>;

	chosen {
	};

	aliases {
		serial0 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@90000";
		serial1 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@a0000";
		serial2 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@b0000";
		serial3 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@c0000";
	};

	psci {
		compatible = "arm,psci-1.0\0arm,psci-0.2\0arm,psci";
		method = "smc";
		cpu_suspend = <0xc4000001>;
		cpu_off = <0x84000002>;
		cpu_on = <0xc4000003>;
		sys_poweroff = <0x84000008>;
		sys_reset = <0x84000009>;
	};

	cpus {
		#address-cells = <0x02>;
		#size-cells = <0x00>;

		cpu-map {

			cluster0 {

				core0 {
					cpu = <0x02>;
				};

				core1 {
					cpu = <0x03>;
				};

				core2 {
					cpu = <0x04>;
				};

				core3 {
					cpu = <0x05>;
				};
			};

			cluster1 {

				core0 {
					cpu = <0x06>;
				};

				core1 {
					cpu = <0x07>;
				};

				core2 {
					cpu = <0x08>;
				};

				core3 {
					cpu = <0x09>;
				};
			};
		};

		idle-states {
			entry-method = "arm,psci";

			cpu-sleep-0 {
				compatible = "arm,idle-state";
				local-timer-stop;
				arm,psci-suspend-param = <0x10000>;
				entry-latency-us = <0x28>;
				exit-latency-us = <0x64>;
				min-residency-us = <0x96>;
				phandle = <0x0a>;
			};

			cluster-sleep-0 {
				compatible = "arm,idle-state";
				local-timer-stop;
				arm,psci-suspend-param = <0x1010000>;
				entry-latency-us = <0x1f4>;
				exit-latency-us = <0x3e8>;
				min-residency-us = <0x9c4>;
				phandle = <0x0b>;
			};
		};

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x00>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x02>;
		};

		cpu@1 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x100>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x03>;
		};

		cpu@2 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x200>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x04>;
		};

		cpu@3 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x300>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x05>;
		};

		cpu@100 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x10000>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x06>;
		};

		cpu@101 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x10100>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x07>;
		};

		cpu@102 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x10200>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x08>;
		};

		cpu@103 {
			device_type = "cpu";
			compatible = "arm,armv8";
			reg = <0x00 0x10300>;
			enable-method = "psci";
			cpu-idle-states = <0x0a 0x0b>;
			next-level-cache = <0x0c>;
			phandle = <0x09>;
		};

		l2-cache0 {
			compatible = "cache";
			phandle = <0x0c>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		reg = <0x00 0x80000000 0x00 0x7f000000 0x08 0x80000000 0x00 0x80000000>;
	};

	interrupt-controller@2f000000 {
		compatible = "arm,gic-v3";
		#interrupt-cells = <0x03>;
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;
		interrupt-controller;
		reg = <0x00 0x2f000000 0x00 0x10000 0x00 0x2f100000 0x00 0x200000 0x00 0x2c000000 0x00 0x2000 0x00 0x2c010000 0x00 0x2000 0x00 0x2c02f000 0x00 0x2000>;
		interrupts = <0x01 0x09 0x04>;
		phandle = <0x01>;

		its@2f020000 {
			compatible = "arm,gic-v3-its";
			msi-controller;
			reg = <0x00 0x2f020000 0x00 0x20000>;
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <0x01 0x0d 0xff01 0x01 0x0e 0xff01 0x01 0x0b 0xff01 0x01 0x0a 0xff01>;
		clock-frequency = <0x5f5e100>;
	};

	timer@2a810000 {
		compatible = "arm,armv7-timer-mem";
		reg = <0x00 0x2a810000 0x00 0x10000>;
		clock-frequency = <0x5f5e100>;
		#address-cells = <0x02>;
		#size-cells = <0x02>;
		ranges;

		frame@2a830000 {
			frame-number = <0x01>;
			interrupts = <0x00 0x1a 0x04>;
			reg = <0x00 0x2a830000 0x00 0x10000>;
		};
	};

	pmu {
		compatible = "arm,armv8-pmuv3";
		interrupts = <0x00 0x3c 0x04 0x00 0x3d 0x04 0x00 0x3e 0x04 0x00 0x3f 0x04>;
	};

	smb@0,0 {
		compatible = "simple-bus";
		#address-cells = <0x02>;
		#size-cells = <0x01>;
		ranges = <0x00 0x00 0x00 0x8000000 0x4000000 0x01 0x00 0x00 0x14000000 0x4000000 0x02 0x00 0x00 0x18000000 0x4000000 0x03 0x00 0x00 0x1c000000 0x4000000 0x04 0x00 0x00 0xc000000 0x4000000 0x05 0x00 0x00 0x10000000 0x4000000>;

		motherboard {
			arm,v2m-memory-map = "rs1";
			compatible = "arm,vexpress,v2m-p1\0simple-bus";
			#address-cells = <0x02>;
			#size-cells = <0x01>;
			ranges;

			flash@0,00000000 {
				compatible = "arm,vexpress-flash\0cfi-flash";
				reg = <0x00 0x00 0x4000000 0x04 0x00 0x4000000>;
				bank-width = <0x04>;
			};

			vram@2,00000000 {
				compatible = "arm,vexpress-vram";
				reg = <0x02 0x00 0x800000>;
			};

			ethernet@2,02000000 {
				compatible = "smsc,lan91c111";
				reg = <0x02 0x2000000 0x10000>;
				interrupts = <0x00 0x0f 0x04>;
			};

			clk24mhz {
				compatible = "fixed-clock";
				#clock-cells = <0x00>;
				clock-frequency = <0x16e3600>;
				clock-output-names = "v2m:clk24mhz";
				phandle = <0x0f>;
			};

			refclk1mhz {
				compatible = "fixed-clock";
				#clock-cells = <0x00>;
				clock-frequency = <0xf4240>;
				clock-output-names = "v2m:refclk1mhz";
				phandle = <0x0e>;
			};

			refclk32khz {
				compatible = "fixed-clock";
				#clock-cells = <0x00>;
				clock-frequency = <0x8000>;
				clock-output-names = "v2m:refclk32khz";
				phandle = <0x0d>;
			};

			iofpga@3,00000000 {
				compatible = "arm,amba-bus\0simple-bus";
				#address-cells = <0x01>;
				#size-cells = <0x01>;
				ranges = <0x00 0x03 0x00 0x200000>;

				sysreg@10000 {
					compatible = "arm,vexpress-sysreg";
					reg = <0x10000 0x1000>;
					gpio-controller;
					#gpio-cells = <0x02>;
					phandle = <0x10>;
				};

				sysctl@20000 {
					compatible = "arm,sp810\0arm,primecell";
					reg = <0x20000 0x1000>;
					clocks = <0x0d 0x0e 0x0f>;
					clock-names = "refclk\0timclk\0apb_pclk";
					#clock-cells = <0x01>;
					clock-output-names = "timerclken0\0timerclken1\0timerclken2\0timerclken3";
					phandle = <0x12>;
				};

				aaci@40000 {
					compatible = "arm,pl041\0arm,primecell";
					reg = <0x40000 0x1000>;
					interrupts = <0x00 0x0b 0x04>;
					clocks = <0x0f>;
					clock-names = "apb_pclk";
				};

				mmci@50000 {
					compatible = "arm,pl180\0arm,primecell";
					reg = <0x50000 0x1000>;
					interrupts = <0x00 0x09 0x04 0x00 0x0a 0x04>;
					cd-gpios = <0x10 0x00 0x00>;
					wp-gpios = <0x10 0x01 0x00>;
					max-frequency = <0xb71b00>;
					vmmc-supply = <0x11>;
					clocks = <0x0f 0x0f>;
					clock-names = "mclk\0apb_pclk";
				};

				kmi@60000 {
					compatible = "arm,pl050\0arm,primecell";
					reg = <0x60000 0x1000>;
					interrupts = <0x00 0x0c 0x04>;
					clocks = <0x0f 0x0f>;
					clock-names = "KMIREFCLK\0apb_pclk";
				};

				kmi@70000 {
					compatible = "arm,pl050\0arm,primecell";
					reg = <0x70000 0x1000>;
					interrupts = <0x00 0x0d 0x04>;
					clocks = <0x0f 0x0f>;
					clock-names = "KMIREFCLK\0apb_pclk";
				};

				uart@90000 {
					compatible = "arm,pl011\0arm,primecell";
					reg = <0x90000 0x1000>;
					interrupts = <0x00 0x05 0x04>;
					clocks = <0x0f 0x0f>;
					clock-names = "uartclk\0apb_pclk";
				};

				uart@a0000 {
					compatible = "arm,pl011\0arm,primecell";
					reg = <0xa0000 0x1000>;
					interrupts = <0x00 0x06 0x04>;
					clocks = <0x0f 0x0f>;
					clock-names = "uartclk\0apb_pclk";
				};

				uart@b0000 {
					compatible = "arm,pl011\0arm,primecell";
					reg = <0xb0000 0x1000>;
					interrupts = <0x00 0x07 0x04>;
					clocks = <0x0f 0x0f>;
					clock-names = "uartclk\0apb_pclk";
				};

				uart@c0000 {
					compatible = "arm,pl011\0arm,primecell";
					reg = <0xc0000 0x1000>;
					interrupts = <0x00 0x08 0x04>;
					clocks = <0x0f 0x0f>;
					clock-names = "uartclk\0apb_pclk";
				};

				wdt@f0000 {
					compatible = "arm,sp805\0arm,primecell";
					reg = <0xf0000 0x1000>;
					interrupts = <0x00 0x00 0x04>;
					clocks = <0x0d 0x0f>;
					clock-names = "wdogclk\0apb_pclk";
				};

				timer@110000 {
					compatible = "arm,sp804\0arm,primecell";
					reg = <0x110000 0x1000>;
					interrupts = <0x00 0x02 0x04>;
					clocks = <0x12 0x00 0x12 0x01 0x0f>;
					clock-names = "timclken1\0timclken2\0apb_pclk";
				};

				timer@120000 {
					compatible = "arm,sp804\0arm,primecell";
					reg = <0x120000 0x1000>;
					interrupts = <0x00 0x03 0x04>;
					clocks = <0x12 0x02 0x12 0x03 0x0f>;
					clock-names = "timclken1\0timclken2\0apb_pclk";
				};

				rtc@170000 {
					compatible = "arm,pl031\0arm,primecell";
					reg = <0x170000 0x1000>;
					interrupts = <0x00 0x04 0x04>;
					clocks = <0x0f>;
					clock-names = "apb_pclk";
				};

				clcd@1f0000 {
					compatible = "arm,pl111\0arm,primecell";
					reg = <0x1f0000 0x1000>;
					interrupts = <0x00 0x0e 0x04>;
					clocks = <0x13 0x0f>;
					clock-names = "clcdclk\0apb_pclk";
					mode = "XVGA";
					use_dma = <0x00>;
					framebuffer = <0x18000000 0x180000>;
				};

				virtio_block@130000 {
					compatible = "virtio,mmio";
					reg = <0x130000 0x1000>;
					interrupts = <0x00 0x2a 0x04>;
				};
			};

			fixedregulator {
				compatible = "regulator-fixed";
				regulator-name = "3V3";
				regulator-min-microvolt = <0x325aa0>;
				regulator-max-microvolt = <0x325aa0>;
				regulator-always-on;
				phandle = <0x11>;
			};

			mcc {
				compatible = "arm,vexpress,config-bus\0simple-bus";
				arm,vexpress,config-bridge = <0x10>;

				osc {
					compatible = "arm,vexpress-osc";
					arm,vexpress-sysreg,func = <0x01 0x01>;
					freq-range = <0x16a6570 0x3c8eee0>;
					#clock-cells = <0x00>;
					clock-output-names = "v2m:oscclk1";
					phandle = <0x13>;
				};

				muxfpga {
					compatible = "arm,vexpress-muxfpga";
					arm,vexpress-sysreg,func = <0x07 0x00>;
				};

				dvimode {
					compatible = "arm,vexpress-dvimode";
					arm,vexpress-sysreg,func = <0x0b 0x00>;
				};
			};
		};
	};

	panels {

		panel {
			compatible = "panel";
			mode = "XVGA";
			refresh = <0x3c>;
			xres = <0x400>;
			yres = <0x300>;
			pixclock = <0x3d84>;
			left_margin = <0x98>;
			right_margin = <0x30>;
			upper_margin = <0x17>;
			lower_margin = <0x03>;
			hsync_len = <0x68>;
			vsync_len = <0x04>;
			sync = <0x00>;
			vmode = "FB_VMODE_NONINTERLACED";
			tim2 = "TIM2_BCD\0TIM2_IPC";
			cntl = "CNTL_LCDTFT\0CNTL_BGR\0CNTL_LCDVCOMP(1)";
			caps = "CLCD_CAP_5551\0CLCD_CAP_565\0CLCD_CAP_888";
			bpp = <0x10>;
		};
	};
};