| /dts-v1/; |
| |
| /memreserve/ 0x0000000080000000 0x0000000000010000; |
| / { |
| model = "FVP Base"; |
| compatible = "arm,vfp-base\0arm,vexpress"; |
| interrupt-parent = < 0x01 >; |
| #address-cells = < 0x02 >; |
| #size-cells = < 0x02 >; |
| |
| chosen { |
| }; |
| |
| aliases { |
| serial0 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@90000"; |
| serial1 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@a0000"; |
| serial2 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@b0000"; |
| serial3 = "/smb@0,0/motherboard/iofpga@3,00000000/uart@c0000"; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0\0arm,psci-0.2\0arm,psci"; |
| method = "smc"; |
| cpu_suspend = < 0xc4000001 >; |
| cpu_off = < 0x84000002 >; |
| cpu_on = < 0xc4000003 >; |
| sys_poweroff = < 0x84000008 >; |
| sys_reset = < 0x84000009 >; |
| }; |
| |
| cpus { |
| #address-cells = < 0x02 >; |
| #size-cells = < 0x00 >; |
| |
| cpu-map { |
| |
| cluster0 { |
| |
| core0 { |
| cpu = < 0x02 >; |
| }; |
| |
| core1 { |
| cpu = < 0x03 >; |
| }; |
| |
| core2 { |
| cpu = < 0x04 >; |
| }; |
| |
| core3 { |
| cpu = < 0x05 >; |
| }; |
| }; |
| |
| cluster1 { |
| |
| core0 { |
| cpu = < 0x06 >; |
| }; |
| |
| core1 { |
| cpu = < 0x07 >; |
| }; |
| |
| core2 { |
| cpu = < 0x08 >; |
| }; |
| |
| core3 { |
| cpu = < 0x09 >; |
| }; |
| }; |
| }; |
| |
| idle-states { |
| entry-method = "arm,psci"; |
| |
| cpu-sleep-0 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = < 0x10000 >; |
| entry-latency-us = < 0x28 >; |
| exit-latency-us = < 0x64 >; |
| min-residency-us = < 0x96 >; |
| phandle = < 0x0a >; |
| }; |
| |
| cluster-sleep-0 { |
| compatible = "arm,idle-state"; |
| local-timer-stop; |
| arm,psci-suspend-param = < 0x1010000 >; |
| entry-latency-us = < 0x1f4 >; |
| exit-latency-us = < 0x3e8 >; |
| min-residency-us = < 0x9c4 >; |
| phandle = < 0x0b >; |
| }; |
| }; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x00 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x02 >; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x100 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x03 >; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x200 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x04 >; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x300 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x05 >; |
| }; |
| |
| cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x10000 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x06 >; |
| }; |
| |
| cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x10100 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x07 >; |
| }; |
| |
| cpu@102 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x10200 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x08 >; |
| }; |
| |
| cpu@103 { |
| device_type = "cpu"; |
| compatible = "arm,armv8"; |
| reg = < 0x00 0x10300 >; |
| enable-method = "psci"; |
| cpu-idle-states = < 0x0a 0x0b >; |
| next-level-cache = < 0x0c >; |
| phandle = < 0x09 >; |
| }; |
| |
| l2-cache0 { |
| compatible = "cache"; |
| phandle = < 0x0c >; |
| }; |
| }; |
| |
| memory@80000000 { |
| device_type = "memory"; |
| reg = < 0x00 0x80000000 0x00 0x7f000000 0x08 0x80000000 0x00 0x80000000 >; |
| }; |
| |
| interrupt-controller@2f000000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = < 0x03 >; |
| #address-cells = < 0x02 >; |
| #size-cells = < 0x02 >; |
| ranges; |
| interrupt-controller; |
| reg = < 0x00 0x2f000000 0x00 0x10000 0x00 0x2f100000 0x00 0x200000 0x00 0x2c000000 0x00 0x2000 0x00 0x2c010000 0x00 0x2000 0x00 0x2c02f000 0x00 0x2000 >; |
| interrupts = < 0x01 0x09 0x04 >; |
| phandle = < 0x01 >; |
| |
| its@2f020000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| reg = < 0x00 0x2f020000 0x00 0x20000 >; |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = < 0x01 0x0d 0xff01 0x01 0x0e 0xff01 0x01 0x0b 0xff01 0x01 0x0a 0xff01 >; |
| clock-frequency = < 0x5f5e100 >; |
| }; |
| |
| timer@2a810000 { |
| compatible = "arm,armv7-timer-mem"; |
| reg = < 0x00 0x2a810000 0x00 0x10000 >; |
| clock-frequency = < 0x5f5e100 >; |
| #address-cells = < 0x02 >; |
| #size-cells = < 0x02 >; |
| ranges; |
| |
| frame@2a830000 { |
| frame-number = < 0x01 >; |
| interrupts = < 0x00 0x1a 0x04 >; |
| reg = < 0x00 0x2a830000 0x00 0x10000 >; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = < 0x00 0x3c 0x04 0x00 0x3d 0x04 0x00 0x3e 0x04 0x00 0x3f 0x04 >; |
| }; |
| |
| smb@0,0 { |
| compatible = "simple-bus"; |
| #address-cells = < 0x02 >; |
| #size-cells = < 0x01 >; |
| ranges = < 0x00 0x00 0x00 0x8000000 0x4000000 0x01 0x00 0x00 0x14000000 0x4000000 0x02 0x00 0x00 0x18000000 0x4000000 0x03 0x00 0x00 0x1c000000 0x4000000 0x04 0x00 0x00 0xc000000 0x4000000 0x05 0x00 0x00 0x10000000 0x4000000 >; |
| |
| motherboard { |
| arm,v2m-memory-map = "rs1"; |
| compatible = "arm,vexpress,v2m-p1\0simple-bus"; |
| #address-cells = < 0x02 >; |
| #size-cells = < 0x01 >; |
| ranges; |
| |
| flash@0,00000000 { |
| compatible = "arm,vexpress-flash\0cfi-flash"; |
| reg = < 0x00 0x00 0x4000000 0x04 0x00 0x4000000 >; |
| bank-width = < 0x04 >; |
| }; |
| |
| vram@2,00000000 { |
| compatible = "arm,vexpress-vram"; |
| reg = < 0x02 0x00 0x800000 >; |
| }; |
| |
| ethernet@2,02000000 { |
| compatible = "smsc,lan91c111"; |
| reg = < 0x02 0x2000000 0x10000 >; |
| interrupts = < 0x00 0x0f 0x04 >; |
| }; |
| |
| clk24mhz { |
| compatible = "fixed-clock"; |
| #clock-cells = < 0x00 >; |
| clock-frequency = < 0x16e3600 >; |
| clock-output-names = "v2m:clk24mhz"; |
| phandle = < 0x0f >; |
| }; |
| |
| refclk1mhz { |
| compatible = "fixed-clock"; |
| #clock-cells = < 0x00 >; |
| clock-frequency = < 0xf4240 >; |
| clock-output-names = "v2m:refclk1mhz"; |
| phandle = < 0x0e >; |
| }; |
| |
| refclk32khz { |
| compatible = "fixed-clock"; |
| #clock-cells = < 0x00 >; |
| clock-frequency = < 0x8000 >; |
| clock-output-names = "v2m:refclk32khz"; |
| phandle = < 0x0d >; |
| }; |
| |
| iofpga@3,00000000 { |
| compatible = "arm,amba-bus\0simple-bus"; |
| #address-cells = < 0x01 >; |
| #size-cells = < 0x01 >; |
| ranges = < 0x00 0x03 0x00 0x200000 >; |
| |
| sysreg@10000 { |
| compatible = "arm,vexpress-sysreg"; |
| reg = < 0x10000 0x1000 >; |
| gpio-controller; |
| #gpio-cells = < 0x02 >; |
| phandle = < 0x10 >; |
| }; |
| |
| sysctl@20000 { |
| compatible = "arm,sp810\0arm,primecell"; |
| reg = < 0x20000 0x1000 >; |
| clocks = < 0x0d 0x0e 0x0f >; |
| clock-names = "refclk\0timclk\0apb_pclk"; |
| #clock-cells = < 0x01 >; |
| clock-output-names = "timerclken0\0timerclken1\0timerclken2\0timerclken3"; |
| phandle = < 0x12 >; |
| }; |
| |
| aaci@40000 { |
| compatible = "arm,pl041\0arm,primecell"; |
| reg = < 0x40000 0x1000 >; |
| interrupts = < 0x00 0x0b 0x04 >; |
| clocks = < 0x0f >; |
| clock-names = "apb_pclk"; |
| }; |
| |
| mmci@50000 { |
| compatible = "arm,pl180\0arm,primecell"; |
| reg = < 0x50000 0x1000 >; |
| interrupts = < 0x00 0x09 0x04 0x00 0x0a 0x04 >; |
| cd-gpios = < 0x10 0x00 0x00 >; |
| wp-gpios = < 0x10 0x01 0x00 >; |
| max-frequency = < 0xb71b00 >; |
| vmmc-supply = < 0x11 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "mclk\0apb_pclk"; |
| }; |
| |
| kmi@60000 { |
| compatible = "arm,pl050\0arm,primecell"; |
| reg = < 0x60000 0x1000 >; |
| interrupts = < 0x00 0x0c 0x04 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "KMIREFCLK\0apb_pclk"; |
| }; |
| |
| kmi@70000 { |
| compatible = "arm,pl050\0arm,primecell"; |
| reg = < 0x70000 0x1000 >; |
| interrupts = < 0x00 0x0d 0x04 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "KMIREFCLK\0apb_pclk"; |
| }; |
| |
| uart@90000 { |
| compatible = "arm,pl011\0arm,primecell"; |
| reg = < 0x90000 0x1000 >; |
| interrupts = < 0x00 0x05 0x04 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "uartclk\0apb_pclk"; |
| }; |
| |
| uart@a0000 { |
| compatible = "arm,pl011\0arm,primecell"; |
| reg = < 0xa0000 0x1000 >; |
| interrupts = < 0x00 0x06 0x04 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "uartclk\0apb_pclk"; |
| }; |
| |
| uart@b0000 { |
| compatible = "arm,pl011\0arm,primecell"; |
| reg = < 0xb0000 0x1000 >; |
| interrupts = < 0x00 0x07 0x04 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "uartclk\0apb_pclk"; |
| }; |
| |
| uart@c0000 { |
| compatible = "arm,pl011\0arm,primecell"; |
| reg = < 0xc0000 0x1000 >; |
| interrupts = < 0x00 0x08 0x04 >; |
| clocks = < 0x0f 0x0f >; |
| clock-names = "uartclk\0apb_pclk"; |
| }; |
| |
| wdt@f0000 { |
| compatible = "arm,sp805\0arm,primecell"; |
| reg = < 0xf0000 0x1000 >; |
| interrupts = < 0x00 0x00 0x04 >; |
| clocks = < 0x0d 0x0f >; |
| clock-names = "wdogclk\0apb_pclk"; |
| }; |
| |
| timer@110000 { |
| compatible = "arm,sp804\0arm,primecell"; |
| reg = < 0x110000 0x1000 >; |
| interrupts = < 0x00 0x02 0x04 >; |
| clocks = < 0x12 0x00 0x12 0x01 0x0f >; |
| clock-names = "timclken1\0timclken2\0apb_pclk"; |
| }; |
| |
| timer@120000 { |
| compatible = "arm,sp804\0arm,primecell"; |
| reg = < 0x120000 0x1000 >; |
| interrupts = < 0x00 0x03 0x04 >; |
| clocks = < 0x12 0x02 0x12 0x03 0x0f >; |
| clock-names = "timclken1\0timclken2\0apb_pclk"; |
| }; |
| |
| rtc@170000 { |
| compatible = "arm,pl031\0arm,primecell"; |
| reg = < 0x170000 0x1000 >; |
| interrupts = < 0x00 0x04 0x04 >; |
| clocks = < 0x0f >; |
| clock-names = "apb_pclk"; |
| }; |
| |
| clcd@1f0000 { |
| compatible = "arm,pl111\0arm,primecell"; |
| reg = < 0x1f0000 0x1000 >; |
| interrupts = < 0x00 0x0e 0x04 >; |
| clocks = < 0x13 0x0f >; |
| clock-names = "clcdclk\0apb_pclk"; |
| mode = "XVGA"; |
| use_dma = < 0x00 >; |
| framebuffer = < 0x18000000 0x180000 >; |
| }; |
| |
| virtio_block@130000 { |
| compatible = "virtio,mmio"; |
| reg = < 0x130000 0x1000 >; |
| interrupts = < 0x00 0x2a 0x04 >; |
| }; |
| }; |
| |
| fixedregulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "3V3"; |
| regulator-min-microvolt = < 0x325aa0 >; |
| regulator-max-microvolt = < 0x325aa0 >; |
| regulator-always-on; |
| phandle = < 0x11 >; |
| }; |
| |
| mcc { |
| compatible = "arm,vexpress,config-bus\0simple-bus"; |
| arm,vexpress,config-bridge = < 0x10 >; |
| |
| osc { |
| compatible = "arm,vexpress-osc"; |
| arm,vexpress-sysreg,func = < 0x01 0x01 >; |
| freq-range = < 0x16a6570 0x3c8eee0 >; |
| #clock-cells = < 0x00 >; |
| clock-output-names = "v2m:oscclk1"; |
| phandle = < 0x13 >; |
| }; |
| |
| muxfpga { |
| compatible = "arm,vexpress-muxfpga"; |
| arm,vexpress-sysreg,func = < 0x07 0x00 >; |
| }; |
| |
| dvimode { |
| compatible = "arm,vexpress-dvimode"; |
| arm,vexpress-sysreg,func = < 0x0b 0x00 >; |
| }; |
| }; |
| }; |
| }; |
| |
| panels { |
| |
| panel { |
| compatible = "panel"; |
| mode = "XVGA"; |
| refresh = < 0x3c >; |
| xres = < 0x400 >; |
| yres = < 0x300 >; |
| pixclock = < 0x3d84 >; |
| left_margin = < 0x98 >; |
| right_margin = < 0x30 >; |
| upper_margin = < 0x17 >; |
| lower_margin = < 0x03 >; |
| hsync_len = < 0x68 >; |
| vsync_len = < 0x04 >; |
| sync = < 0x00 >; |
| vmode = "FB_VMODE_NONINTERLACED"; |
| tim2 = "TIM2_BCD\0TIM2_IPC"; |
| cntl = "CNTL_LCDTFT\0CNTL_BGR\0CNTL_LCDVCOMP(1)"; |
| caps = "CLCD_CAP_5551\0CLCD_CAP_565\0CLCD_CAP_888"; |
| bpp = < 0x10 >; |
| }; |
| }; |
| }; |
