blob: a9bfb4d8b6ac8c7618b78a24bd7d30cff09c3656 [file] [log] [blame]
MMIO register bitfield-based multiplexer controller bindings
Define register bitfields to be used to control multiplexers. The parent
device tree node must be a syscon node to provide register access.
Required properties:
- compatible : "mmio-mux"
- #mux-control-cells : <1>
- mux-reg-masks : an array of register offset and pre-shifted bitfield mask
pairs, each describing a single mux control.
* Standard mux-controller bindings as decribed in mux-controller.txt
Optional properties:
- idle-states : if present, the state the muxes will have when idle. The
special state MUX_IDLE_AS_IS is the default.
The multiplexer state of each multiplexer is defined as the value of the
bitfield described by the corresponding register offset and bitfield mask pair
in the mux-reg-masks array, accessed through the parent syscon.
Example:
syscon {
compatible = "syscon";
mux: mux-controller {
compatible = "mmio-mux";
#mux-control-cells = <1>;
mux-reg-masks = <0x3 0x30>, /* 0: reg 0x3, bits 5:4 */
<0x3 0x40>, /* 1: reg 0x3, bit 6 */
idle-states = <MUX_IDLE_AS_IS>, <0>;
};
};
video-mux {
compatible = "video-mux";
mux-controls = <&mux 0>;
ports {
/* inputs 0..3 */
port@0 {
reg = <0>;
};
port@1 {
reg = <1>;
};
port@2 {
reg = <2>;
};
port@3 {
reg = <3>;
};
/* output */
port@4 {
reg = <4>;
};
};
};