blob: 0c2a6c8a15369faba1d1615288fea505220e9449 [file] [log] [blame]
Fixed Voltage regulators
Required properties:
- compatible: Must be "regulator-fixed";
- regulator-name: Defined in regulator.txt as optional, but required here.
Optional properties:
- gpio: gpio to use for enable control
- startup-delay-us: startup time in microseconds
- enable-active-high: Polarity of GPIO is Active high
If this property is missing, the default assumed is Active low.
- gpio-open-drain: GPIO is open drain type.
If this property is missing then default assumption is false.
-vin-supply: Input supply name.
Any property defined as part of the core regulator
binding, defined in regulator.txt, can also be used.
However a fixed voltage regulator is expected to have the
regulator-min-microvolt and regulator-max-microvolt
to be the same.
Example:
abc: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-supply";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 16 0>;
startup-delay-us = <70000>;
enable-active-high;
regulator-boot-on;
gpio-open-drain;
vin-supply = <&parent_reg>;
};