| Renesas Electronics USB3.0 Peripheral driver |
| |
| Required properties: |
| - compatible: Must contain one of the following: |
| - "renesas,r8a7795-usb3-peri" |
| - "renesas,r8a7796-usb3-peri" |
| - "renesas,r8a77965-usb3-peri" |
| - "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible |
| device |
| |
| When compatible with the generic version, nodes must list the |
| SoC-specific version corresponding to the platform first |
| followed by the generic version. |
| |
| - reg: Base address and length of the register for the USB3.0 Peripheral |
| - interrupts: Interrupt specifier for the USB3.0 Peripheral |
| - clocks: clock phandle and specifier pair |
| |
| Optional properties: |
| - phys: phandle + phy specifier pair |
| - phy-names: must be "usb" |
| |
| Example of R-Car H3 ES1.x: |
| usb3_peri0: usb@ee020000 { |
| compatible = "renesas,r8a7795-usb3-peri", |
| "renesas,rcar-gen3-usb3-peri"; |
| reg = <0 0xee020000 0 0x400>; |
| interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 328>; |
| }; |
| |
| usb3_peri1: usb@ee060000 { |
| compatible = "renesas,r8a7795-usb3-peri", |
| "renesas,rcar-gen3-usb3-peri"; |
| reg = <0 0xee060000 0 0x400>; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&cpg CPG_MOD 327>; |
| }; |
