| TC358764 MIPI-DSI to LVDS panel bridge |
| |
| Required properties: |
| - compatible: "toshiba,tc358764" |
| - reg: the virtual channel number of a DSI peripheral |
| - vddc-supply: core voltage supply, 1.2V |
| - vddio-supply: I/O voltage supply, 1.8V or 3.3V |
| - vddlvds-supply: LVDS1/2 voltage supply, 3.3V |
| - reset-gpios: a GPIO spec for the reset pin |
| |
| The device node can contain following 'port' child nodes, |
| according to the OF graph bindings defined in [1]: |
| 0: DSI Input, not required, if the bridge is DSI controlled |
| 1: LVDS Output, mandatory |
| |
| [1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| |
| bridge@0 { |
| reg = <0>; |
| compatible = "toshiba,tc358764"; |
| vddc-supply = <&vcc_1v2_reg>; |
| vddio-supply = <&vcc_1v8_reg>; |
| vddlvds-supply = <&vcc_3v3_reg>; |
| reset-gpios = <&gpd1 6 GPIO_ACTIVE_LOW>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@1 { |
| reg = <1>; |
| lvds_ep: endpoint { |
| remote-endpoint = <&panel_ep>; |
| }; |
| }; |
| }; |
