| Ingenic JZ47xx LCD driver |
| |
| Required properties: |
| - compatible: one of: |
| * ingenic,jz4740-lcd |
| * ingenic,jz4725b-lcd |
| - reg: LCD registers location and length |
| - clocks: LCD pixclock and device clock specifiers. |
| The device clock is only required on the JZ4740. |
| - clock-names: "lcd_pclk" and "lcd" |
| - interrupts: Specifies the interrupt line the LCD controller is connected to. |
| |
| Example: |
| |
| panel { |
| compatible = "sharp,ls020b1dd01d"; |
| |
| backlight = <&backlight>; |
| power-supply = <&vcc>; |
| |
| port { |
| panel_input: endpoint { |
| remote-endpoint = <&panel_output>; |
| }; |
| }; |
| }; |
| |
| |
| lcd: lcd-controller@13050000 { |
| compatible = "ingenic,jz4725b-lcd"; |
| reg = <0x13050000 0x1000>; |
| |
| interrupt-parent = <&intc>; |
| interrupts = <31>; |
| |
| clocks = <&cgu JZ4725B_CLK_LCD>; |
| clock-names = "lcd"; |
| |
| port { |
| panel_output: endpoint { |
| remote-endpoint = <&panel_input>; |
| }; |
| }; |
| }; |
