| Samsung s6e63m0 AMOLED LCD panel |
| |
| Required properties: |
| - compatible: "samsung,s6e63m0" |
| - reset-gpios: GPIO spec for reset pin |
| - vdd3-supply: VDD regulator |
| - vci-supply: VCI regulator |
| |
| The panel must obey rules for SPI slave device specified in document [1]. |
| |
| The device node can contain one 'port' child node with one child |
| 'endpoint' node, according to the bindings defined in [2]. This |
| node should describe panel's video bus. |
| |
| [1]: Documentation/devicetree/bindings/spi/spi-bus.txt |
| [2]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| |
| s6e63m0: display@0 { |
| compatible = "samsung,s6e63m0"; |
| reg = <0>; |
| reset-gpio = <&mp05 5 1>; |
| vdd3-supply = <&ldo12_reg>; |
| vci-supply = <&ldo11_reg>; |
| spi-max-frequency = <1200000>; |
| |
| port { |
| lcd_ep: endpoint { |
| remote-endpoint = <&fimd_ep>; |
| }; |
| }; |
| }; |
