# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: AVIA HX711 ADC chip for weight cells

maintainers:
  - Andreas Klinger <ak@it-klinger.de>

description: |
  Bit-banging driver using two GPIOs:
  - sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
    and up to 3 cycles for selection of the input channel and gain for the
    next measurement
  - dout-gpio is the sensor data the sensor responds to the clock

  Specifications about the driver can be found at:
  http://www.aviaic.com/ENProducts.aspx

properties:
  compatible:
    enum:
      - avia,hx711

  sck-gpios:
    description:
      Definition of the GPIO for the clock (output). In the datasheet it is
      named PD_SCK
    maxItems: 1

  dout-gpios:
    description:
      Definition of the GPIO for the data-out sent by the sensor in
      response to the clock (input).
      See Documentation/devicetree/bindings/gpio/gpio.txt for information
      on how to specify a consumer gpio.
    maxItems: 1

  avdd-supply:
    description:
      Definition of the regulator used as analog supply
    maxItems: 1

  clock-frequency:
    minimum: 20000
    maximum: 2500000
    default: 400000

required:
  - compatible
  - sck-gpios
  - dout-gpios
  - avdd-supply

examples:
  - |
    #include <dt-bindings/gpio/gpio.h>
    weight {
        compatible = "avia,hx711";
        sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
        dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
        avdd-supply = <&avdd>;
        clock-frequency = <100000>;
    };