blob: 4fa00e2eafcfb5b4c60997c703c04fdbff6c8225 [file] [log] [blame]
Broadcom Bluetooth Chips
---------------------
This documents the binding structure and common properties for serial
attached Broadcom devices.
Serial attached Broadcom devices shall be a child node of the host UART
device the slave device is attached to.
Required properties:
- compatible: should contain one of the following:
* "brcm,bcm20702a1"
* "brcm,bcm4330-bt"
* "brcm,bcm43438-bt"
* "brcm,bcm4345c5"
Optional properties:
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
- shutdown-gpios: GPIO specifier, used to enable the BT module
- device-wakeup-gpios: GPIO specifier, used to wakeup the controller
- host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
- clocks: 1 or 2 clocks as defined in clock-names below, in that order
- clock-names: names for clock inputs, matching the clocks given
- "extclk": deprecated, replaced by "txco"
- "txco": external reference clock (not a standalone crystal)
- "lpo": external low power 32.768 kHz clock
- vbat-supply: phandle to regulator supply for VBAT
- vddio-supply: phandle to regulator supply for VDDIO
Example:
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <921600>;
};
};