| * MediaTek mt76xx devices |
| |
| This node provides properties for configuring the MediaTek mt76xx wireless |
| device. The node is expected to be specified as a child node of the PCI |
| controller to which the wireless chip is connected. |
| |
| Alternatively, it can specify the wireless part of the MT7628/MT7688 SoC. |
| For SoC, use the compatible string "mediatek,mt7628-wmac" and the following |
| properties: |
| |
| - reg: Address and length of the register set for the device. |
| - interrupts: Main device interrupt |
| |
| Optional properties: |
| |
| - ieee80211-freq-limit: See ieee80211.txt |
| - mediatek,mtd-eeprom: Specify a MTD partition + offset containing EEPROM data |
| |
| The MAC address can as well be set with corresponding optional properties |
| defined in net/ethernet.txt. |
| |
| Optional nodes: |
| - led: Properties for a connected LED |
| Optional properties: |
| - led-sources: See Documentation/devicetree/bindings/leds/common.txt |
| |
| &pcie { |
| pcie0 { |
| wifi@0,0 { |
| compatible = "mediatek,mt76"; |
| reg = <0x0000 0 0 0 0>; |
| ieee80211-freq-limit = <5000000 6000000>; |
| mediatek,mtd-eeprom = <&factory 0x8000>; |
| |
| led { |
| led-sources = <2>; |
| }; |
| }; |
| }; |
| }; |
| |
| MT7628 example: |
| |
| wmac: wmac@10300000 { |
| compatible = "mediatek,mt7628-wmac"; |
| reg = <0x10300000 0x100000>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <6>; |
| |
| mediatek,mtd-eeprom = <&factory 0x0000>; |
| }; |
