blob: 21af30fbb81ff5a38496d69bfa5da28f7b4e4972 [file] [log] [blame]
* virtio memory mapped device
See http://ozlabs.org/~rusty/virtio-spec/ for more details.
Required properties:
- compatible: "virtio,mmio" compatibility string
- reg: control registers base address and size including configuration space
- interrupts: interrupt generated by the device
Required properties for virtio-iommu:
- #iommu-cells: When the node corresponds to a virtio-iommu device, it is
linked to DMA masters using the "iommus" or "iommu-map"
properties [1][2]. #iommu-cells specifies the size of the
"iommus" property. For virtio-iommu #iommu-cells must be
1, each cell describing a single endpoint ID.
Optional properties:
- iommus: If the device accesses memory through an IOMMU, it should
have an "iommus" property [1]. Since virtio-iommu itself
does not access memory through an IOMMU, the "virtio,mmio"
node cannot have both an "#iommu-cells" and an "iommus"
property.
Example:
virtio_block@3000 {
compatible = "virtio,mmio";
reg = <0x3000 0x100>;
interrupts = <41>;
/* Device has endpoint ID 23 */
iommus = <&viommu 23>
}
viommu: iommu@3100 {
compatible = "virtio,mmio";
reg = <0x3100 0x100>;
interrupts = <42>;
#iommu-cells = <1>
}
[1] Documentation/devicetree/bindings/iommu/iommu.txt
[2] Documentation/devicetree/bindings/pci/pci-iommu.txt