| System Control and Power Interface (SCPI) Message Protocol |
| (in addition to the standard binding in [0]) |
| |
| Juno SRAM and Shared Memory for SCPI |
| ------------------------------------ |
| |
| Required properties: |
| - compatible : should be "arm,juno-sram-ns" for Non-secure SRAM |
| |
| Each sub-node represents the reserved area for SCPI. |
| |
| Required sub-node properties: |
| - reg : The base offset and size of the reserved area with the SRAM |
| - compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based |
| shared memory on Juno platforms |
| |
| Sensor bindings for the sensors based on SCPI Message Protocol |
| -------------------------------------------------------------- |
| Required properties: |
| - compatible : should be "arm,scpi-sensors". |
| - #thermal-sensor-cells: should be set to 1. |
| For Juno R0 and Juno R1 refer to [1] for the |
| sensor identifiers |
| |
| [0] Documentation/devicetree/bindings/arm/arm,scpi.txt |
| [1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html |
