| JDI model LT070ME05000 1200x1920 7" DSI Panel |
| |
| Required properties: |
| - compatible: should be "jdi,lt070me05000" |
| - vddp-supply: phandle of the regulator that provides the supply voltage |
| Power IC supply (3-5V) |
| - iovcc-supply: phandle of the regulator that provides the supply voltage |
| IOVCC , power supply for LCM (1.8V) |
| - enable-gpios: phandle of gpio for enable line |
| LED_EN, LED backlight enable, High active |
| - reset-gpios: phandle of gpio for reset line |
| This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names |
| XRES, Reset, Low active |
| - dcdc-en-gpios: phandle of the gpio for power ic line |
| Power IC supply enable, High active |
| |
| Example: |
| |
| dsi0: qcom,mdss_dsi@4700000 { |
| panel@0 { |
| compatible = "jdi,lt070me05000"; |
| reg = <0>; |
| |
| vddp-supply = <&pm8921_l17>; |
| iovcc-supply = <&pm8921_lvs7>; |
| |
| enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; |
| reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; |
| dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
