| Samsung S6E8AA0 AMOLED LCD 5.3 inch panel |
| |
| Required properties: |
| - compatible: "samsung,s6e8aa0" |
| - reg: the virtual channel number of a DSI peripheral |
| - vdd3-supply: core voltage supply |
| - vci-supply: voltage supply for analog circuits |
| - reset-gpios: a GPIO spec for the reset pin |
| - display-timings: timings for the connected panel as described by [1] |
| |
| Optional properties: |
| - power-on-delay: delay after turning regulators on [ms] |
| - reset-delay: delay after reset sequence [ms] |
| - init-delay: delay after initialization sequence [ms] |
| - panel-width-mm: physical panel width [mm] |
| - panel-height-mm: physical panel height [mm] |
| - flip-horizontal: boolean to flip image horizontally |
| - flip-vertical: boolean to flip image vertically |
| |
| The device node can contain one 'port' child node with one child |
| 'endpoint' node, according to the bindings defined in [2]. This |
| node should describe panel's video bus. |
| |
| [1]: Documentation/devicetree/bindings/display/panel/display-timing.txt |
| [2]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| |
| panel { |
| compatible = "samsung,s6e8aa0"; |
| reg = <0>; |
| vdd3-supply = <&vcclcd_reg>; |
| vci-supply = <&vlcd_reg>; |
| reset-gpios = <&gpy4 5 0>; |
| power-on-delay= <50>; |
| reset-delay = <100>; |
| init-delay = <100>; |
| panel-width-mm = <58>; |
| panel-height-mm = <103>; |
| flip-horizontal; |
| flip-vertical; |
| |
| display-timings { |
| timing0: timing-0 { |
| clock-frequency = <57153600>; |
| hactive = <720>; |
| vactive = <1280>; |
| hfront-porch = <5>; |
| hback-porch = <5>; |
| hsync-len = <5>; |
| vfront-porch = <13>; |
| vback-porch = <1>; |
| vsync-len = <2>; |
| }; |
| }; |
| }; |
