blob: fbb0a6d8b9643540e4f5c2e084216b5e66560b2e [file] [log] [blame]
* Synopsys DesignWare I2C
Required properties :
- compatible : should be "snps,designware-i2c"
- reg : Offset and length of the register set for the device
- interrupts : <IRQ> where IRQ is the interrupt number.
Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
Optional properties :
- i2c-sda-hold-time-ns : should contain the SDA hold time in nanoseconds.
This option is only supported in hardware blocks version 1.11a or newer.
- i2c-scl-falling-time-ns : should contain the SCL falling time in nanoseconds.
This value which is by default 300ns is used to compute the tLOW period.
- i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
This value which is by default 300ns is used to compute the tHIGH period.
Examples :
i2c@f0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
interrupts = <11>;
clock-frequency = <400000>;
};
i2c@1120000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,designware-i2c";
reg = <0x1120000 0x1000>;
interrupt-parent = <&ictl>;
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
i2c-sda-falling-time-ns = <300>;
i2c-scl-falling-time-ns = <300>;
};
i2c@1120000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x2000 0x100>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <0>;
eeprom@64 {
compatible = "linux,slave-24c02";
reg = <0x40000064>;
};
};