| * Maxim 1x3x/136x/116xx Analog to Digital Converter (ADC) |
| |
| The node for this driver must be a child node of a I2C controller, hence |
| all mandatory properties for your controller must be specified. See directory: |
| |
| Documentation/devicetree/bindings/i2c |
| |
| for more details. |
| |
| Required properties: |
| - compatible: Should be one of |
| "maxim,max1361" |
| "maxim,max1362" |
| "maxim,max1363" |
| "maxim,max1364" |
| "maxim,max1036" |
| "maxim,max1037" |
| "maxim,max1038" |
| "maxim,max1039" |
| "maxim,max1136" |
| "maxim,max1137" |
| "maxim,max1138" |
| "maxim,max1139" |
| "maxim,max1236" |
| "maxim,max1237" |
| "maxim,max1238" |
| "maxim,max1239" |
| "maxim,max11600" |
| "maxim,max11601" |
| "maxim,max11602" |
| "maxim,max11603" |
| "maxim,max11604" |
| "maxim,max11605" |
| "maxim,max11606" |
| "maxim,max11607" |
| "maxim,max11608" |
| "maxim,max11609" |
| "maxim,max11610" |
| "maxim,max11611" |
| "maxim,max11612" |
| "maxim,max11613" |
| "maxim,max11614" |
| "maxim,max11615" |
| "maxim,max11616" |
| "maxim,max11617" |
| "maxim,max11644" |
| "maxim,max11645" |
| "maxim,max11646" |
| "maxim,max11647" |
| - reg: Should contain the ADC I2C address |
| |
| Optional properties: |
| - vcc-supply: phandle to the regulator that provides power to the ADC. |
| - vref-supply: phandle to the regulator for ADC reference voltage. |
| - interrupts: IRQ line for the ADC. If not used the driver will use |
| polling. |
| |
| Example: |
| adc: max11644@36 { |
| compatible = "maxim,max11644"; |
| reg = <0x36>; |
| vref-supply = <&adc_vref>; |
| }; |
