| * Analog Devices AD5272 digital potentiometer |
| |
| The node for this device must be a child node of a I2C controller, hence |
| all mandatory properties for your controller must be specified. See directory: |
| |
| Documentation/devicetree/bindings/i2c |
| |
| for more details. |
| |
| Required properties: |
| - compatible: Must be one of the following, depending on the model: |
| adi,ad5272-020 |
| adi,ad5272-050 |
| adi,ad5272-100 |
| adi,ad5274-020 |
| adi,ad5274-100 |
| |
| Optional properties: |
| - reset-gpios: GPIO specification for the RESET input. This is an |
| active low signal to the AD5272. |
| |
| Example: |
| ad5272: potentiometer@2f { |
| reg = <0x2F>; |
| compatible = "adi,ad5272-020"; |
| reset-gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>; |
| }; |
