blob: 2c11ac76fac992156b24ba957ae3bbd94093e390 [file] [log] [blame]
Marvell Orion SoC interrupt controllers
* Main interrupt controller
Required properties:
- compatible: shall be "marvell,orion-intc"
- reg: base address(es) of interrupt registers starting with CAUSE register
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
The interrupt sources map to the corresponding bits in the interrupt
registers, i.e.
- 0 maps to bit 0 of first base address,
- 1 maps to bit 1 of first base address,
- 32 maps to bit 0 of second base address, and so on.
Example:
intc: interrupt-controller {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
/* Dove has 64 first level interrupts */
reg = <0x20200 0x10>, <0x20210 0x10>;
};
* Bridge interrupt controller
Required properties:
- compatible: shall be "marvell,orion-bridge-intc"
- reg: base address of bridge interrupt registers starting with CAUSE register
- interrupts: bridge interrupt of the main interrupt controller
- interrupt-controller: identifies the node as an interrupt controller
- #interrupt-cells: number of cells to encode an interrupt source, shall be 1
Optional properties:
- marvell,#interrupts: number of interrupts provided by bridge interrupt
controller, defaults to 32 if not set
Example:
bridge_intc: interrupt-controller {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <0>;
/* Dove bridge provides 5 interrupts */
marvell,#interrupts = <5>;
};