blob: a48df7c08ab087d7873306e319b7e2384a439fbe [file] [log] [blame]
TI LP87565 PMIC MFD driver
Required properties:
- compatible: "ti,lp87565", "ti,lp87565-q1"
- reg: I2C slave address.
- gpio-controller: Marks the device node as a GPIO Controller.
- #gpio-cells: Should be two. The first cell is the pin number and
the second cell is used to specify flags.
See ../gpio/gpio.txt for more information.
- xxx-in-supply: Phandle to parent supply node of each regulator
populated under regulators node. xxx should match
the supply_name populated in driver.
Example:
lp87565_pmic: pmic@60 {
compatible = "ti,lp87565-q1";
reg = <0x60>;
gpio-controller;
#gpio-cells = <2>;
buck10-in-supply = <&vsys_3v3>;
buck23-in-supply = <&vsys_3v3>;
regulators: regulators {
buck10_reg: buck10 {
/* VDD_MPU */
regulator-name = "buck10";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-always-on;
regulator-boot-on;
};
buck23_reg: buck23 {
/* VDD_GPU */
regulator-name = "buck23";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-boot-on;
regulator-always-on;
};
};
};