| TI Wilink 6/7/8 (wl12xx/wl18xx) SDIO devices |
| |
| This node provides properties for controlling the wilink wireless device. The |
| node is expected to be specified as a child node to the SDIO controller that |
| connects the device to the system. |
| |
| Required properties: |
| - compatible: should be one of the following: |
| * "ti,wl1271" |
| * "ti,wl1273" |
| * "ti,wl1281" |
| * "ti,wl1283" |
| * "ti,wl1285" |
| * "ti,wl1801" |
| * "ti,wl1805" |
| * "ti,wl1807" |
| * "ti,wl1831" |
| * "ti,wl1835" |
| * "ti,wl1837" |
| - interrupts : specifies attributes for the out-of-band interrupt. |
| |
| Optional properties: |
| - ref-clock-frequency : ref clock frequency in Hz |
| - tcxo-clock-frequency : tcxo clock frequency in Hz |
| |
| Note: the *-clock-frequency properties assume internal clocks. In case of external |
| clock, new bindings (for parsing the clock nodes) have to be added. |
| |
| Example: |
| |
| &mmc3 { |
| vmmc-supply = <&wlan_en_reg>; |
| bus-width = <4>; |
| cap-power-off-card; |
| keep-power-in-suspend; |
| |
| #address-cells = <1>; |
| #size-cells = <0>; |
| wlcore: wlcore@2 { |
| compatible = "ti,wl1835"; |
| reg = <2>; |
| interrupt-parent = <&gpio0>; |
| interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
