/*
 * Copyright 2016 Advanced Micro Devices, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 */

/* To compile this assembly code:
 * PROJECT=greenland ./sp3 cwsr_trap_handler_gfx9.asm -hex tmp.hex
 */

/* HW (GFX9) source code for CWSR trap handler */
/* Version 18 + multiple trap handler */

// this performance-optimal version was originally from Seven Xu at SRDC

// Revison #18	 --...
/* Rev History
** #1. Branch from gc dv.   //gfxip/gfx9/main/src/test/suites/block/cs/sr/cs_trap_handler.sp3#1,#50, #51, #52-53(Skip, Already Fixed by PV), #54-56(merged),#57-58(mergerd, skiped-already fixed by PV)
** #4. SR Memory Layout:
**			 1. VGPR-SGPR-HWREG-{LDS}
**			 2. tba_hi.bits.26 - reconfigured as the first wave in tg bits, for defer Save LDS for a threadgroup.. performance concern..
** #5. Update: 1. Accurate g8sr_ts_save_d timestamp
** #6. Update: 1. Fix s_barrier usage; 2. VGPR s/r using swizzle buffer?(NoNeed, already matched the swizzle pattern, more investigation)
** #7. Update: 1. don't barrier if noLDS
** #8. Branch: 1. Branch to ver#0, which is very similar to gc dv version
**	       2. Fix SQ issue by s_sleep 2
** #9. Update: 1. Fix scc restore failed issue, restore wave_status at last
**	       2. optimize s_buffer save by burst 16sgprs...
** #10. Update 1. Optimize restore sgpr by busrt 16 sgprs.
** #11. Update 1. Add 2 more timestamp for debug version
** #12. Update 1. Add VGPR SR using DWx4, some case improve and some case drop performance
** #13. Integ  1. Always use MUBUF for PV trap shader...
** #14. Update 1. s_buffer_store soft clause...
** #15. Update 1. PERF - sclar write with glc:0/mtype0 to allow L2 combine. perf improvement a lot.
** #16. Update 1. PRRF - UNROLL LDS_DMA got 2500cycle save in IP tree
** #17. Update 1. FUNC - LDS_DMA has issues while ATC, replace with ds_read/buffer_store for save part[TODO restore part]
**	       2. PERF - Save LDS before save VGPR to cover LDS save long latency...
** #18. Update 1. FUNC - Implicitly estore STATUS.VCCZ, which is not writable by s_setreg_b32
**	       2. FUNC - Handle non-CWSR traps
*/

var G8SR_WDMEM_HWREG_OFFSET = 0
var G8SR_WDMEM_SGPR_OFFSET  = 128  // in bytes

// Keep definition same as the app shader, These 2 time stamps are part of the app shader... Should before any Save and after restore.

var G8SR_DEBUG_TIMESTAMP = 0
var G8SR_DEBUG_TS_SAVE_D_OFFSET = 40*4	// ts_save_d timestamp offset relative to SGPR_SR_memory_offset
var s_g8sr_ts_save_s	= s[34:35]   // save start
var s_g8sr_ts_sq_save_msg  = s[36:37]	// The save shader send SAVEWAVE msg to spi
var s_g8sr_ts_spi_wrexec   = s[38:39]	// the SPI write the sr address to SQ
var s_g8sr_ts_save_d	= s[40:41]   // save end
var s_g8sr_ts_restore_s = s[42:43]   // restore start
var s_g8sr_ts_restore_d = s[44:45]   // restore end

var G8SR_VGPR_SR_IN_DWX4 = 0
var G8SR_SAVE_BUF_RSRC_WORD1_STRIDE_DWx4 = 0x00100000	 // DWx4 stride is 4*4Bytes
var G8SR_RESTORE_BUF_RSRC_WORD1_STRIDE_DWx4  = G8SR_SAVE_BUF_RSRC_WORD1_STRIDE_DWx4


/*************************************************************************/
/*		    control on how to run the shader			 */
/*************************************************************************/
//any hack that needs to be made to run this code in EMU (either because various EMU code are not ready or no compute save & restore in EMU run)
var EMU_RUN_HACK		    =	0
var EMU_RUN_HACK_RESTORE_NORMAL	    =	0
var EMU_RUN_HACK_SAVE_NORMAL_EXIT   =	0
var EMU_RUN_HACK_SAVE_SINGLE_WAVE   =	0
var EMU_RUN_HACK_SAVE_FIRST_TIME    =	0		    //for interrupted restore in which the first save is through EMU_RUN_HACK
var SAVE_LDS			    =	1
var WG_BASE_ADDR_LO		    =	0x9000a000
var WG_BASE_ADDR_HI		    =	0x0
var WAVE_SPACE			    =	0x5000		    //memory size that each wave occupies in workgroup state mem
var CTX_SAVE_CONTROL		    =	0x0
var CTX_RESTORE_CONTROL		    =	CTX_SAVE_CONTROL
var SIM_RUN_HACK		    =	0		    //any hack that needs to be made to run this code in SIM (either because various RTL code are not ready or no compute save & restore in RTL run)
var SGPR_SAVE_USE_SQC		    =	1		    //use SQC D$ to do the write
var USE_MTBUF_INSTEAD_OF_MUBUF	    =	0		    //because TC EMU currently asserts on 0 of // overload DFMT field to carry 4 more bits of stride for MUBUF opcodes
var SWIZZLE_EN			    =	0		    //whether we use swizzled buffer addressing
var ACK_SQC_STORE		    =	1		    //workaround for suspected SQC store bug causing incorrect stores under concurrency

/**************************************************************************/
/*			variables					  */
/**************************************************************************/
var SQ_WAVE_STATUS_INST_ATC_SHIFT  = 23
var SQ_WAVE_STATUS_INST_ATC_MASK   = 0x00800000
var SQ_WAVE_STATUS_SPI_PRIO_SHIFT  = 1
var SQ_WAVE_STATUS_SPI_PRIO_MASK   = 0x00000006
var SQ_WAVE_STATUS_HALT_MASK       = 0x2000
var SQ_WAVE_STATUS_PRE_SPI_PRIO_SHIFT   = 0
var SQ_WAVE_STATUS_PRE_SPI_PRIO_SIZE    = 1
var SQ_WAVE_STATUS_POST_SPI_PRIO_SHIFT  = 3
var SQ_WAVE_STATUS_POST_SPI_PRIO_SIZE   = 29

var SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT	= 12
var SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE	= 9
var SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT	= 8
var SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE	= 6
var SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT	= 24
var SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE	= 3			//FIXME	 sq.blk still has 4 bits at this time while SQ programming guide has 3 bits

var SQ_WAVE_TRAPSTS_SAVECTX_MASK    =	0x400
var SQ_WAVE_TRAPSTS_EXCE_MASK	    =	0x1FF			// Exception mask
var SQ_WAVE_TRAPSTS_SAVECTX_SHIFT   =	10
var SQ_WAVE_TRAPSTS_MEM_VIOL_MASK   =	0x100
var SQ_WAVE_TRAPSTS_MEM_VIOL_SHIFT  =	8
var SQ_WAVE_TRAPSTS_PRE_SAVECTX_MASK	=   0x3FF
var SQ_WAVE_TRAPSTS_PRE_SAVECTX_SHIFT	=   0x0
var SQ_WAVE_TRAPSTS_PRE_SAVECTX_SIZE	=   10
var SQ_WAVE_TRAPSTS_POST_SAVECTX_MASK	=   0xFFFFF800
var SQ_WAVE_TRAPSTS_POST_SAVECTX_SHIFT	=   11
var SQ_WAVE_TRAPSTS_POST_SAVECTX_SIZE	=   21
var SQ_WAVE_TRAPSTS_ILLEGAL_INST_MASK	=   0x800

var SQ_WAVE_IB_STS_RCNT_SHIFT		=   16			//FIXME
var SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT	=   15			//FIXME
var SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK	= 0x1F8000
var SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK_NEG	= 0x00007FFF	//FIXME

var SQ_BUF_RSRC_WORD1_ATC_SHIFT	    =	24
var SQ_BUF_RSRC_WORD3_MTYPE_SHIFT   =	27

var TTMP11_SAVE_RCNT_FIRST_REPLAY_SHIFT	=   26			// bits [31:26] unused by SPI debug data
var TTMP11_SAVE_RCNT_FIRST_REPLAY_MASK	=   0xFC000000

/*	Save	    */
var S_SAVE_BUF_RSRC_WORD1_STRIDE	=   0x00040000		//stride is 4 bytes
var S_SAVE_BUF_RSRC_WORD3_MISC		=   0x00807FAC		//SQ_SEL_X/Y/Z/W, BUF_NUM_FORMAT_FLOAT, (0 for MUBUF stride[17:14] when ADD_TID_ENABLE and BUF_DATA_FORMAT_32 for MTBUF), ADD_TID_ENABLE

var S_SAVE_SPI_INIT_ATC_MASK		=   0x08000000		//bit[27]: ATC bit
var S_SAVE_SPI_INIT_ATC_SHIFT		=   27
var S_SAVE_SPI_INIT_MTYPE_MASK		=   0x70000000		//bit[30:28]: Mtype
var S_SAVE_SPI_INIT_MTYPE_SHIFT		=   28
var S_SAVE_SPI_INIT_FIRST_WAVE_MASK	=   0x04000000		//bit[26]: FirstWaveInTG
var S_SAVE_SPI_INIT_FIRST_WAVE_SHIFT	=   26

var S_SAVE_PC_HI_RCNT_SHIFT		=   28			//FIXME	 check with Brian to ensure all fields other than PC[47:0] can be used
var S_SAVE_PC_HI_RCNT_MASK		=   0xF0000000		//FIXME
var S_SAVE_PC_HI_FIRST_REPLAY_SHIFT	=   27			//FIXME
var S_SAVE_PC_HI_FIRST_REPLAY_MASK	=   0x08000000		//FIXME

var s_save_spi_init_lo		    =	exec_lo
var s_save_spi_init_hi		    =	exec_hi

var s_save_pc_lo	    =	ttmp0		//{TTMP1, TTMP0} = {3'h0,pc_rewind[3:0], HT[0],trapID[7:0], PC[47:0]}
var s_save_pc_hi	    =	ttmp1
var s_save_exec_lo	    =	ttmp2
var s_save_exec_hi	    =	ttmp3
var s_save_tmp		    =	ttmp4
var s_save_trapsts	    =	ttmp5		//not really used until the end of the SAVE routine
var s_save_xnack_mask_lo    =	ttmp6
var s_save_xnack_mask_hi    =	ttmp7
var s_save_buf_rsrc0	    =	ttmp8
var s_save_buf_rsrc1	    =	ttmp9
var s_save_buf_rsrc2	    =	ttmp10
var s_save_buf_rsrc3	    =	ttmp11
var s_save_status	    =	ttmp12
var s_save_mem_offset	    =	ttmp14
var s_save_alloc_size	    =	s_save_trapsts		//conflict
var s_save_m0		    =	ttmp15
var s_save_ttmps_lo	    =	s_save_tmp		//no conflict
var s_save_ttmps_hi	    =	s_save_trapsts		//no conflict

/*	Restore	    */
var S_RESTORE_BUF_RSRC_WORD1_STRIDE	    =	S_SAVE_BUF_RSRC_WORD1_STRIDE
var S_RESTORE_BUF_RSRC_WORD3_MISC	    =	S_SAVE_BUF_RSRC_WORD3_MISC

var S_RESTORE_SPI_INIT_ATC_MASK		    =	0x08000000	    //bit[27]: ATC bit
var S_RESTORE_SPI_INIT_ATC_SHIFT	    =	27
var S_RESTORE_SPI_INIT_MTYPE_MASK	    =	0x70000000	    //bit[30:28]: Mtype
var S_RESTORE_SPI_INIT_MTYPE_SHIFT	    =	28
var S_RESTORE_SPI_INIT_FIRST_WAVE_MASK	    =	0x04000000	    //bit[26]: FirstWaveInTG
var S_RESTORE_SPI_INIT_FIRST_WAVE_SHIFT	    =	26

var S_RESTORE_PC_HI_RCNT_SHIFT		    =	S_SAVE_PC_HI_RCNT_SHIFT
var S_RESTORE_PC_HI_RCNT_MASK		    =	S_SAVE_PC_HI_RCNT_MASK
var S_RESTORE_PC_HI_FIRST_REPLAY_SHIFT	    =	S_SAVE_PC_HI_FIRST_REPLAY_SHIFT
var S_RESTORE_PC_HI_FIRST_REPLAY_MASK	    =	S_SAVE_PC_HI_FIRST_REPLAY_MASK

var s_restore_spi_init_lo		    =	exec_lo
var s_restore_spi_init_hi		    =	exec_hi

var s_restore_mem_offset	=   ttmp12
var s_restore_alloc_size	=   ttmp3
var s_restore_tmp		=   ttmp2
var s_restore_mem_offset_save	=   s_restore_tmp	//no conflict

var s_restore_m0	    =	s_restore_alloc_size	//no conflict

var s_restore_mode	    =	ttmp7

var s_restore_pc_lo	    =	ttmp0
var s_restore_pc_hi	    =	ttmp1
var s_restore_exec_lo	    =	ttmp14
var s_restore_exec_hi	    = 	ttmp15
var s_restore_status	    =	ttmp4
var s_restore_trapsts	    =	ttmp5
var s_restore_xnack_mask_lo =	xnack_mask_lo
var s_restore_xnack_mask_hi =	xnack_mask_hi
var s_restore_buf_rsrc0	    =	ttmp8
var s_restore_buf_rsrc1	    =	ttmp9
var s_restore_buf_rsrc2	    =	ttmp10
var s_restore_buf_rsrc3	    =	ttmp11
var s_restore_ttmps_lo	    =	s_restore_tmp		//no conflict
var s_restore_ttmps_hi	    =	s_restore_alloc_size	//no conflict

/**************************************************************************/
/*			trap handler entry points			  */
/**************************************************************************/
/* Shader Main*/

shader main
  asic(GFX9)
  type(CS)


    if ((EMU_RUN_HACK) && (!EMU_RUN_HACK_RESTORE_NORMAL))		    //hack to use trap_id for determining save/restore
	//FIXME VCCZ un-init assertion s_getreg_b32	s_save_status, hwreg(HW_REG_STATUS)	    //save STATUS since we will change SCC
	s_and_b32 s_save_tmp, s_save_pc_hi, 0xffff0000		    //change SCC
	s_cmp_eq_u32 s_save_tmp, 0x007e0000			    //Save: trap_id = 0x7e. Restore: trap_id = 0x7f.
	s_cbranch_scc0 L_JUMP_TO_RESTORE			    //do not need to recover STATUS here  since we are going to RESTORE
	//FIXME	 s_setreg_b32	hwreg(HW_REG_STATUS),	s_save_status	    //need to recover STATUS since we are going to SAVE
	s_branch L_SKIP_RESTORE					    //NOT restore, SAVE actually
    else
	s_branch L_SKIP_RESTORE					    //NOT restore. might be a regular trap or save
    end

L_JUMP_TO_RESTORE:
    s_branch L_RESTORE						    //restore

L_SKIP_RESTORE:

    s_getreg_b32    s_save_status, hwreg(HW_REG_STATUS)				    //save STATUS since we will change SCC
    s_andn2_b32	    s_save_status, s_save_status, SQ_WAVE_STATUS_SPI_PRIO_MASK	    //check whether this is for save
    s_getreg_b32    s_save_trapsts, hwreg(HW_REG_TRAPSTS)
    s_and_b32       ttmp2, s_save_trapsts, SQ_WAVE_TRAPSTS_SAVECTX_MASK    //check whether this is for save
    s_cbranch_scc1  L_SAVE					//this is the operation for save

    // *********    Handle non-CWSR traps	*******************
if (!EMU_RUN_HACK)
    // Illegal instruction is a non-maskable exception which blocks context save.
    // Halt the wavefront and return from the trap.
    s_and_b32       ttmp2, s_save_trapsts, SQ_WAVE_TRAPSTS_ILLEGAL_INST_MASK
    s_cbranch_scc1  L_HALT_WAVE

    // If STATUS.MEM_VIOL is asserted then we cannot fetch from the TMA.
    // Instead, halt the wavefront and return from the trap.
    s_and_b32       ttmp2, s_save_trapsts, SQ_WAVE_TRAPSTS_MEM_VIOL_MASK
    s_cbranch_scc0  L_FETCH_2ND_TRAP

L_HALT_WAVE:
    // If STATUS.HALT is set then this fault must come from SQC instruction fetch.
    // We cannot prevent further faults so just terminate the wavefront.
    s_and_b32       ttmp2, s_save_status, SQ_WAVE_STATUS_HALT_MASK
    s_cbranch_scc0  L_NOT_ALREADY_HALTED
    s_endpgm
L_NOT_ALREADY_HALTED:
    s_or_b32        s_save_status, s_save_status, SQ_WAVE_STATUS_HALT_MASK

    // If the PC points to S_ENDPGM then context save will fail if STATUS.HALT is set.
    // Rewind the PC to prevent this from occurring. The debugger compensates for this.
    s_sub_u32       ttmp0, ttmp0, 0x8
    s_subb_u32      ttmp1, ttmp1, 0x0

L_FETCH_2ND_TRAP:
    // Preserve and clear scalar XNACK state before issuing scalar reads.
    // Save IB_STS.FIRST_REPLAY[15] and IB_STS.RCNT[20:16] into unused space ttmp11[31:26].
    s_getreg_b32    ttmp2, hwreg(HW_REG_IB_STS)
    s_and_b32       ttmp3, ttmp2, SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK
    s_lshl_b32      ttmp3, ttmp3, (TTMP11_SAVE_RCNT_FIRST_REPLAY_SHIFT - SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT)
    s_andn2_b32     ttmp11, ttmp11, TTMP11_SAVE_RCNT_FIRST_REPLAY_MASK
    s_or_b32        ttmp11, ttmp11, ttmp3

    s_andn2_b32     ttmp2, ttmp2, SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK
    s_setreg_b32    hwreg(HW_REG_IB_STS), ttmp2

    // Read second-level TBA/TMA from first-level TMA and jump if available.
    // ttmp[2:5] and ttmp12 can be used (others hold SPI-initialized debug data)
    // ttmp12 holds SQ_WAVE_STATUS
    s_getreg_b32    ttmp4, hwreg(HW_REG_SQ_SHADER_TMA_LO)
    s_getreg_b32    ttmp5, hwreg(HW_REG_SQ_SHADER_TMA_HI)
    s_lshl_b64      [ttmp4, ttmp5], [ttmp4, ttmp5], 0x8
    s_load_dwordx2  [ttmp2, ttmp3], [ttmp4, ttmp5], 0x0 glc:1 // second-level TBA
    s_waitcnt       lgkmcnt(0)
    s_load_dwordx2  [ttmp4, ttmp5], [ttmp4, ttmp5], 0x8 glc:1 // second-level TMA
    s_waitcnt       lgkmcnt(0)
    s_and_b64       [ttmp2, ttmp3], [ttmp2, ttmp3], [ttmp2, ttmp3]
    s_cbranch_scc0  L_NO_NEXT_TRAP // second-level trap handler not been set
    s_setpc_b64     [ttmp2, ttmp3] // jump to second-level trap handler

L_NO_NEXT_TRAP:
    s_getreg_b32    s_save_trapsts, hwreg(HW_REG_TRAPSTS)
    s_and_b32	    s_save_trapsts, s_save_trapsts, SQ_WAVE_TRAPSTS_EXCE_MASK // Check whether it is an exception
    s_cbranch_scc1  L_EXCP_CASE	  // Exception, jump back to the shader program directly.
    s_add_u32	    ttmp0, ttmp0, 4   // S_TRAP case, add 4 to ttmp0
    s_addc_u32	ttmp1, ttmp1, 0
L_EXCP_CASE:
    s_and_b32	ttmp1, ttmp1, 0xFFFF

    // Restore SQ_WAVE_IB_STS.
    s_lshr_b32      ttmp2, ttmp11, (TTMP11_SAVE_RCNT_FIRST_REPLAY_SHIFT - SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT)
    s_and_b32       ttmp2, ttmp2, SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK
    s_setreg_b32    hwreg(HW_REG_IB_STS), ttmp2

    // Restore SQ_WAVE_STATUS.
    s_and_b64       exec, exec, exec // Restore STATUS.EXECZ, not writable by s_setreg_b32
    s_and_b64       vcc, vcc, vcc    // Restore STATUS.VCCZ, not writable by s_setreg_b32
    set_status_without_spi_prio(s_save_status, ttmp2)

    s_rfe_b64       [ttmp0, ttmp1]
end
    // *********	End handling of non-CWSR traps	 *******************

/**************************************************************************/
/*			save routine					  */
/**************************************************************************/

L_SAVE:

if G8SR_DEBUG_TIMESTAMP
	s_memrealtime	s_g8sr_ts_save_s
	s_waitcnt lgkmcnt(0)	     //FIXME, will cause xnack??
end

    s_and_b32	    s_save_pc_hi, s_save_pc_hi, 0x0000ffff    //pc[47:32]

    s_mov_b32	    s_save_tmp, 0							    //clear saveCtx bit
    s_setreg_b32    hwreg(HW_REG_TRAPSTS, SQ_WAVE_TRAPSTS_SAVECTX_SHIFT, 1), s_save_tmp	    //clear saveCtx bit

    s_getreg_b32    s_save_tmp, hwreg(HW_REG_IB_STS, SQ_WAVE_IB_STS_RCNT_SHIFT, SQ_WAVE_IB_STS_RCNT_SIZE)		    //save RCNT
    s_lshl_b32	    s_save_tmp, s_save_tmp, S_SAVE_PC_HI_RCNT_SHIFT
    s_or_b32	    s_save_pc_hi, s_save_pc_hi, s_save_tmp
    s_getreg_b32    s_save_tmp, hwreg(HW_REG_IB_STS, SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT, SQ_WAVE_IB_STS_FIRST_REPLAY_SIZE)   //save FIRST_REPLAY
    s_lshl_b32	    s_save_tmp, s_save_tmp, S_SAVE_PC_HI_FIRST_REPLAY_SHIFT
    s_or_b32	    s_save_pc_hi, s_save_pc_hi, s_save_tmp
    s_getreg_b32    s_save_tmp, hwreg(HW_REG_IB_STS)					    //clear RCNT and FIRST_REPLAY in IB_STS
    s_and_b32	    s_save_tmp, s_save_tmp, SQ_WAVE_IB_STS_RCNT_FIRST_REPLAY_MASK_NEG

    s_setreg_b32    hwreg(HW_REG_IB_STS), s_save_tmp

    /*	    inform SPI the readiness and wait for SPI's go signal */
    s_mov_b32	    s_save_exec_lo, exec_lo						    //save EXEC and use EXEC for the go signal from SPI
    s_mov_b32	    s_save_exec_hi, exec_hi
    s_mov_b64	    exec,   0x0								    //clear EXEC to get ready to receive

if G8SR_DEBUG_TIMESTAMP
	s_memrealtime  s_g8sr_ts_sq_save_msg
	s_waitcnt lgkmcnt(0)
end

    if (EMU_RUN_HACK)

    else
	s_sendmsg   sendmsg(MSG_SAVEWAVE)  //send SPI a message and wait for SPI's write to EXEC
    end

    // Set SPI_PRIO=2 to avoid starving instruction fetch in the waves we're waiting for.
    s_or_b32 s_save_tmp, s_save_status, (2 << SQ_WAVE_STATUS_SPI_PRIO_SHIFT)
    s_setreg_b32 hwreg(HW_REG_STATUS), s_save_tmp

  L_SLEEP:
    s_sleep 0x2		       // sleep 1 (64clk) is not enough for 8 waves per SIMD, which will cause SQ hang, since the 7,8th wave could not get arbit to exec inst, while other waves are stuck into the sleep-loop and waiting for wrexec!=0

    if (EMU_RUN_HACK)

    else
	s_cbranch_execz L_SLEEP
    end

if G8SR_DEBUG_TIMESTAMP
	s_memrealtime  s_g8sr_ts_spi_wrexec
	s_waitcnt lgkmcnt(0)
end

    if ((EMU_RUN_HACK) && (!EMU_RUN_HACK_SAVE_SINGLE_WAVE))
	//calculate wd_addr using absolute thread id
	v_readlane_b32 s_save_tmp, v9, 0
	s_lshr_b32 s_save_tmp, s_save_tmp, 6
	s_mul_i32 s_save_tmp, s_save_tmp, WAVE_SPACE
	s_add_i32 s_save_spi_init_lo, s_save_tmp, WG_BASE_ADDR_LO
	s_mov_b32 s_save_spi_init_hi, WG_BASE_ADDR_HI
	s_and_b32 s_save_spi_init_hi, s_save_spi_init_hi, CTX_SAVE_CONTROL
    else
    end
    if ((EMU_RUN_HACK) && (EMU_RUN_HACK_SAVE_SINGLE_WAVE))
	s_add_i32 s_save_spi_init_lo, s_save_tmp, WG_BASE_ADDR_LO
	s_mov_b32 s_save_spi_init_hi, WG_BASE_ADDR_HI
	s_and_b32 s_save_spi_init_hi, s_save_spi_init_hi, CTX_SAVE_CONTROL
    else
    end

    // Save trap temporaries 6-11, 13-15 initialized by SPI debug dispatch logic
    // ttmp SR memory offset : size(VGPR)+size(SGPR)+0x40
    get_vgpr_size_bytes(s_save_ttmps_lo)
    get_sgpr_size_bytes(s_save_ttmps_hi)
    s_add_u32	    s_save_ttmps_lo, s_save_ttmps_lo, s_save_ttmps_hi
    s_add_u32	    s_save_ttmps_lo, s_save_ttmps_lo, s_save_spi_init_lo
    s_addc_u32	    s_save_ttmps_hi, s_save_spi_init_hi, 0x0
    s_and_b32	    s_save_ttmps_hi, s_save_ttmps_hi, 0xFFFF
    s_store_dwordx2 [ttmp6, ttmp7], [s_save_ttmps_lo, s_save_ttmps_hi], 0x40 glc:1
    ack_sqc_store_workaround()
    s_store_dwordx4 [ttmp8, ttmp9, ttmp10, ttmp11], [s_save_ttmps_lo, s_save_ttmps_hi], 0x48 glc:1
    ack_sqc_store_workaround()
    s_store_dword   ttmp13, [s_save_ttmps_lo, s_save_ttmps_hi], 0x58 glc:1
    ack_sqc_store_workaround()
    s_store_dwordx2 [ttmp14, ttmp15], [s_save_ttmps_lo, s_save_ttmps_hi], 0x5C glc:1
    ack_sqc_store_workaround()

    /*	    setup Resource Contants    */
    s_mov_b32	    s_save_buf_rsrc0,	s_save_spi_init_lo							//base_addr_lo
    s_and_b32	    s_save_buf_rsrc1,	s_save_spi_init_hi, 0x0000FFFF						//base_addr_hi
    s_or_b32	    s_save_buf_rsrc1,	s_save_buf_rsrc1,  S_SAVE_BUF_RSRC_WORD1_STRIDE
    s_mov_b32	    s_save_buf_rsrc2,	0									//NUM_RECORDS initial value = 0 (in bytes) although not neccessarily inited
    s_mov_b32	    s_save_buf_rsrc3,	S_SAVE_BUF_RSRC_WORD3_MISC
    s_and_b32	    s_save_tmp,		s_save_spi_init_hi, S_SAVE_SPI_INIT_ATC_MASK
    s_lshr_b32	    s_save_tmp,		s_save_tmp, (S_SAVE_SPI_INIT_ATC_SHIFT-SQ_BUF_RSRC_WORD1_ATC_SHIFT)	    //get ATC bit into position
    s_or_b32	    s_save_buf_rsrc3,	s_save_buf_rsrc3,  s_save_tmp						//or ATC
    s_and_b32	    s_save_tmp,		s_save_spi_init_hi, S_SAVE_SPI_INIT_MTYPE_MASK
    s_lshr_b32	    s_save_tmp,		s_save_tmp, (S_SAVE_SPI_INIT_MTYPE_SHIFT-SQ_BUF_RSRC_WORD3_MTYPE_SHIFT)	    //get MTYPE bits into position
    s_or_b32	    s_save_buf_rsrc3,	s_save_buf_rsrc3,  s_save_tmp						//or MTYPE

    //FIXME  right now s_save_m0/s_save_mem_offset use tma_lo/tma_hi  (might need to save them before using them?)
    s_mov_b32	    s_save_m0,		m0								    //save M0

    /*	    global mem offset		*/
    s_mov_b32	    s_save_mem_offset,	0x0									//mem offset initial value = 0


    /*	    save HW registers	*/
    //////////////////////////////

  L_SAVE_HWREG:
	// HWREG SR memory offset : size(VGPR)+size(SGPR)
       get_vgpr_size_bytes(s_save_mem_offset)
       get_sgpr_size_bytes(s_save_tmp)
       s_add_u32 s_save_mem_offset, s_save_mem_offset, s_save_tmp


    s_mov_b32	    s_save_buf_rsrc2, 0x4				//NUM_RECORDS	in bytes
    if (SWIZZLE_EN)
	s_add_u32	s_save_buf_rsrc2, s_save_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_save_buf_rsrc2,  0x1000000				    //NUM_RECORDS in bytes
    end


    write_hwreg_to_mem(s_save_m0, s_save_buf_rsrc0, s_save_mem_offset)			//M0

    if ((EMU_RUN_HACK) && (EMU_RUN_HACK_SAVE_FIRST_TIME))
	s_add_u32 s_save_pc_lo, s_save_pc_lo, 4		    //pc[31:0]+4
	s_addc_u32 s_save_pc_hi, s_save_pc_hi, 0x0	    //carry bit over
    end

    write_hwreg_to_mem(s_save_pc_lo, s_save_buf_rsrc0, s_save_mem_offset)		    //PC
    write_hwreg_to_mem(s_save_pc_hi, s_save_buf_rsrc0, s_save_mem_offset)
    write_hwreg_to_mem(s_save_exec_lo, s_save_buf_rsrc0, s_save_mem_offset)		//EXEC
    write_hwreg_to_mem(s_save_exec_hi, s_save_buf_rsrc0, s_save_mem_offset)
    write_hwreg_to_mem(s_save_status, s_save_buf_rsrc0, s_save_mem_offset)		//STATUS

    //s_save_trapsts conflicts with s_save_alloc_size
    s_getreg_b32    s_save_trapsts, hwreg(HW_REG_TRAPSTS)
    write_hwreg_to_mem(s_save_trapsts, s_save_buf_rsrc0, s_save_mem_offset)		//TRAPSTS

    write_hwreg_to_mem(xnack_mask_lo, s_save_buf_rsrc0, s_save_mem_offset)	    //XNACK_MASK_LO
    write_hwreg_to_mem(xnack_mask_hi, s_save_buf_rsrc0, s_save_mem_offset)	    //XNACK_MASK_HI

    //use s_save_tmp would introduce conflict here between s_save_tmp and s_save_buf_rsrc2
    s_getreg_b32    s_save_m0, hwreg(HW_REG_MODE)						    //MODE
    write_hwreg_to_mem(s_save_m0, s_save_buf_rsrc0, s_save_mem_offset)


    /*	    the first wave in the threadgroup	 */
    s_and_b32	    s_save_tmp, s_save_spi_init_hi, S_SAVE_SPI_INIT_FIRST_WAVE_MASK	// extract fisrt wave bit
    s_mov_b32	     s_save_exec_hi, 0x0
    s_or_b32	     s_save_exec_hi, s_save_tmp, s_save_exec_hi				 // save first wave bit to s_save_exec_hi.bits[26]


    /*		save SGPRs	*/
	// Save SGPR before LDS save, then the s0 to s4 can be used during LDS save...
    //////////////////////////////

    // SGPR SR memory offset : size(VGPR)
    get_vgpr_size_bytes(s_save_mem_offset)
    // TODO, change RSRC word to rearrange memory layout for SGPRS

    s_getreg_b32    s_save_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE)		//spgr_size
    s_add_u32	    s_save_alloc_size, s_save_alloc_size, 1
    s_lshl_b32	    s_save_alloc_size, s_save_alloc_size, 4			    //Number of SGPRs = (sgpr_size + 1) * 16   (non-zero value)

    if (SGPR_SAVE_USE_SQC)
	s_lshl_b32	s_save_buf_rsrc2,   s_save_alloc_size, 2		    //NUM_RECORDS in bytes
    else
	s_lshl_b32	s_save_buf_rsrc2,   s_save_alloc_size, 8		    //NUM_RECORDS in bytes (64 threads)
    end

    if (SWIZZLE_EN)
	s_add_u32	s_save_buf_rsrc2, s_save_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_save_buf_rsrc2,  0x1000000				    //NUM_RECORDS in bytes
    end


    // backup s_save_buf_rsrc0,1 to s_save_pc_lo/hi, since write_16sgpr_to_mem function will change the rsrc0
    //s_mov_b64 s_save_pc_lo, s_save_buf_rsrc0
    s_mov_b64 s_save_xnack_mask_lo, s_save_buf_rsrc0
    s_add_u32 s_save_buf_rsrc0, s_save_buf_rsrc0, s_save_mem_offset
    s_addc_u32 s_save_buf_rsrc1, s_save_buf_rsrc1, 0

    s_mov_b32	    m0, 0x0			    //SGPR initial index value =0
    s_nop	    0x0				    //Manually inserted wait states
  L_SAVE_SGPR_LOOP:
    // SGPR is allocated in 16 SGPR granularity
    s_movrels_b64   s0, s0     //s0 = s[0+m0], s1 = s[1+m0]
    s_movrels_b64   s2, s2     //s2 = s[2+m0], s3 = s[3+m0]
    s_movrels_b64   s4, s4     //s4 = s[4+m0], s5 = s[5+m0]
    s_movrels_b64   s6, s6     //s6 = s[6+m0], s7 = s[7+m0]
    s_movrels_b64   s8, s8     //s8 = s[8+m0], s9 = s[9+m0]
    s_movrels_b64   s10, s10   //s10 = s[10+m0], s11 = s[11+m0]
    s_movrels_b64   s12, s12   //s12 = s[12+m0], s13 = s[13+m0]
    s_movrels_b64   s14, s14   //s14 = s[14+m0], s15 = s[15+m0]

    write_16sgpr_to_mem(s0, s_save_buf_rsrc0, s_save_mem_offset) //PV: the best performance should be using s_buffer_store_dwordx4
    s_add_u32	    m0, m0, 16							    //next sgpr index
    s_cmp_lt_u32    m0, s_save_alloc_size					    //scc = (m0 < s_save_alloc_size) ? 1 : 0
    s_cbranch_scc1  L_SAVE_SGPR_LOOP					//SGPR save is complete?
    // restore s_save_buf_rsrc0,1
    //s_mov_b64 s_save_buf_rsrc0, s_save_pc_lo
    s_mov_b64 s_save_buf_rsrc0, s_save_xnack_mask_lo


    /*		save first 4 VGPR, then LDS save could use   */
	// each wave will alloc 4 vgprs at least...
    /////////////////////////////////////////////////////////////////////////////////////

    s_mov_b32	    s_save_mem_offset, 0
    s_mov_b32	    exec_lo, 0xFFFFFFFF						    //need every thread from now on
    s_mov_b32	    exec_hi, 0xFFFFFFFF
    s_mov_b32	    xnack_mask_lo, 0x0
    s_mov_b32	    xnack_mask_hi, 0x0

    if (SWIZZLE_EN)
	s_add_u32	s_save_buf_rsrc2, s_save_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_save_buf_rsrc2,  0x1000000				    //NUM_RECORDS in bytes
    end


    // VGPR Allocated in 4-GPR granularity

if G8SR_VGPR_SR_IN_DWX4
	// the const stride for DWx4 is 4*4 bytes
	s_and_b32 s_save_buf_rsrc1, s_save_buf_rsrc1, 0x0000FFFF   // reset const stride to 0
	s_or_b32  s_save_buf_rsrc1, s_save_buf_rsrc1, G8SR_SAVE_BUF_RSRC_WORD1_STRIDE_DWx4  // const stride to 4*4 bytes

	buffer_store_dwordx4 v0, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1

	s_and_b32 s_save_buf_rsrc1, s_save_buf_rsrc1, 0x0000FFFF   // reset const stride to 0
	s_or_b32  s_save_buf_rsrc1, s_save_buf_rsrc1, S_SAVE_BUF_RSRC_WORD1_STRIDE  // reset const stride to 4 bytes
else
	buffer_store_dword v0, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1
	buffer_store_dword v1, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1  offset:256
	buffer_store_dword v2, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1  offset:256*2
	buffer_store_dword v3, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1  offset:256*3
end


    /*		save LDS	*/
    //////////////////////////////

  L_SAVE_LDS:

	// Change EXEC to all threads...
    s_mov_b32	    exec_lo, 0xFFFFFFFF	  //need every thread from now on
    s_mov_b32	    exec_hi, 0xFFFFFFFF

    s_getreg_b32    s_save_alloc_size, hwreg(HW_REG_LDS_ALLOC,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE)		    //lds_size
    s_and_b32	    s_save_alloc_size, s_save_alloc_size, 0xFFFFFFFF		    //lds_size is zero?
    s_cbranch_scc0  L_SAVE_LDS_DONE									       //no lds used? jump to L_SAVE_DONE

    s_barrier		    //LDS is used? wait for other waves in the same TG
    s_and_b32	    s_save_tmp, s_save_exec_hi, S_SAVE_SPI_INIT_FIRST_WAVE_MASK		       //exec is still used here
    s_cbranch_scc0  L_SAVE_LDS_DONE

	// first wave do LDS save;

    s_lshl_b32	    s_save_alloc_size, s_save_alloc_size, 6			    //LDS size in dwords = lds_size * 64dw
    s_lshl_b32	    s_save_alloc_size, s_save_alloc_size, 2			    //LDS size in bytes
    s_mov_b32	    s_save_buf_rsrc2,  s_save_alloc_size			    //NUM_RECORDS in bytes

    // LDS at offset: size(VGPR)+SIZE(SGPR)+SIZE(HWREG)
    //
    get_vgpr_size_bytes(s_save_mem_offset)
    get_sgpr_size_bytes(s_save_tmp)
    s_add_u32  s_save_mem_offset, s_save_mem_offset, s_save_tmp
    s_add_u32 s_save_mem_offset, s_save_mem_offset, get_hwreg_size_bytes()


    if (SWIZZLE_EN)
	s_add_u32	s_save_buf_rsrc2, s_save_buf_rsrc2, 0x0	      //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_save_buf_rsrc2,  0x1000000		      //NUM_RECORDS in bytes
    end

    s_mov_b32	    m0, 0x0						  //lds_offset initial value = 0


var LDS_DMA_ENABLE = 0
var UNROLL = 0
if UNROLL==0 && LDS_DMA_ENABLE==1
	s_mov_b32  s3, 256*2
	s_nop 0
	s_nop 0
	s_nop 0
  L_SAVE_LDS_LOOP:
	//TODO: looks the 2 buffer_store/load clause for s/r will hurt performance.???
    if (SAVE_LDS)     //SPI always alloc LDS space in 128DW granularity
	    buffer_store_lds_dword s_save_buf_rsrc0, s_save_mem_offset lds:1		// first 64DW
	    buffer_store_lds_dword s_save_buf_rsrc0, s_save_mem_offset lds:1 offset:256 // second 64DW
    end

    s_add_u32	    m0, m0, s3						//every buffer_store_lds does 256 bytes
    s_add_u32	    s_save_mem_offset, s_save_mem_offset, s3				//mem offset increased by 256 bytes
    s_cmp_lt_u32    m0, s_save_alloc_size						//scc=(m0 < s_save_alloc_size) ? 1 : 0
    s_cbranch_scc1  L_SAVE_LDS_LOOP							//LDS save is complete?

elsif LDS_DMA_ENABLE==1 && UNROLL==1 // UNROOL	, has ichace miss
      // store from higest LDS address to lowest
      s_mov_b32	 s3, 256*2
      s_sub_u32	 m0, s_save_alloc_size, s3
      s_add_u32 s_save_mem_offset, s_save_mem_offset, m0
      s_lshr_b32 s_save_alloc_size, s_save_alloc_size, 9   // how many 128 trunks...
      s_sub_u32 s_save_alloc_size, 128, s_save_alloc_size   // store from higheset addr to lowest
      s_mul_i32 s_save_alloc_size, s_save_alloc_size, 6*4   // PC offset increment,  each LDS save block cost 6*4 Bytes instruction
      s_add_u32 s_save_alloc_size, s_save_alloc_size, 3*4   //2is the below 2 inst...//s_addc and s_setpc
      s_nop 0
      s_nop 0
      s_nop 0	//pad 3 dw to let LDS_DMA align with 64Bytes
      s_getpc_b64 s[0:1]			      // reuse s[0:1], since s[0:1] already saved
      s_add_u32	  s0, s0,s_save_alloc_size
      s_addc_u32  s1, s1, 0
      s_setpc_b64 s[0:1]


       for var i =0; i< 128; i++
	    // be careful to make here a 64Byte aligned address, which could improve performance...
	    buffer_store_lds_dword s_save_buf_rsrc0, s_save_mem_offset lds:1 offset:0		// first 64DW
	    buffer_store_lds_dword s_save_buf_rsrc0, s_save_mem_offset lds:1 offset:256		  // second 64DW

	if i!=127
	s_sub_u32  m0, m0, s3	   // use a sgpr to shrink 2DW-inst to 1DW inst to improve performance , i.e.  pack more LDS_DMA inst to one Cacheline
	    s_sub_u32  s_save_mem_offset, s_save_mem_offset,  s3
	    end
       end

else   // BUFFER_STORE
      v_mbcnt_lo_u32_b32 v2, 0xffffffff, 0x0
      v_mbcnt_hi_u32_b32 v3, 0xffffffff, v2	// tid
      v_mul_i32_i24 v2, v3, 8	// tid*8
      v_mov_b32 v3, 256*2
      s_mov_b32 m0, 0x10000
      s_mov_b32 s0, s_save_buf_rsrc3
      s_and_b32 s_save_buf_rsrc3, s_save_buf_rsrc3, 0xFF7FFFFF	  // disable add_tid
      s_or_b32 s_save_buf_rsrc3, s_save_buf_rsrc3, 0x58000   //DFMT

L_SAVE_LDS_LOOP_VECTOR:
      ds_read_b64 v[0:1], v2	//x =LDS[a], byte address
      s_waitcnt lgkmcnt(0)
      buffer_store_dwordx2  v[0:1], v2, s_save_buf_rsrc0, s_save_mem_offset offen:1  glc:1  slc:1
//	s_waitcnt vmcnt(0)
//	v_add_u32 v2, vcc[0:1], v2, v3
      v_add_u32 v2, v2, v3
      v_cmp_lt_u32 vcc[0:1], v2, s_save_alloc_size
      s_cbranch_vccnz L_SAVE_LDS_LOOP_VECTOR

      // restore rsrc3
      s_mov_b32 s_save_buf_rsrc3, s0

end

L_SAVE_LDS_DONE:


    /*		save VGPRs  - set the Rest VGPRs	*/
    //////////////////////////////////////////////////////////////////////////////////////
  L_SAVE_VGPR:
    // VGPR SR memory offset: 0
    // TODO rearrange the RSRC words to use swizzle for VGPR save...

    s_mov_b32	    s_save_mem_offset, (0+256*4)				    // for the rest VGPRs
    s_mov_b32	    exec_lo, 0xFFFFFFFF						    //need every thread from now on
    s_mov_b32	    exec_hi, 0xFFFFFFFF

    s_getreg_b32    s_save_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE)		    //vpgr_size
    s_add_u32	    s_save_alloc_size, s_save_alloc_size, 1
    s_lshl_b32	    s_save_alloc_size, s_save_alloc_size, 2			    //Number of VGPRs = (vgpr_size + 1) * 4    (non-zero value)	  //FIXME for GFX, zero is possible
    s_lshl_b32	    s_save_buf_rsrc2,  s_save_alloc_size, 8			    //NUM_RECORDS in bytes (64 threads*4)
    if (SWIZZLE_EN)
	s_add_u32	s_save_buf_rsrc2, s_save_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_save_buf_rsrc2,  0x1000000				    //NUM_RECORDS in bytes
    end


    // VGPR Allocated in 4-GPR granularity

if G8SR_VGPR_SR_IN_DWX4
	// the const stride for DWx4 is 4*4 bytes
	s_and_b32 s_save_buf_rsrc1, s_save_buf_rsrc1, 0x0000FFFF   // reset const stride to 0
	s_or_b32  s_save_buf_rsrc1, s_save_buf_rsrc1, G8SR_SAVE_BUF_RSRC_WORD1_STRIDE_DWx4  // const stride to 4*4 bytes

	s_mov_b32	  m0, 4	    // skip first 4 VGPRs
	s_cmp_lt_u32	  m0, s_save_alloc_size
	s_cbranch_scc0	  L_SAVE_VGPR_LOOP_END	    // no more vgprs

	s_set_gpr_idx_on  m0, 0x1   // This will change M0
	s_add_u32	  s_save_alloc_size, s_save_alloc_size, 0x1000	// because above inst change m0
L_SAVE_VGPR_LOOP:
	v_mov_b32	  v0, v0   // v0 = v[0+m0]
	v_mov_b32	  v1, v1
	v_mov_b32	  v2, v2
	v_mov_b32	  v3, v3


	buffer_store_dwordx4 v0, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1
	s_add_u32	  m0, m0, 4
	s_add_u32	  s_save_mem_offset, s_save_mem_offset, 256*4
	s_cmp_lt_u32	  m0, s_save_alloc_size
    s_cbranch_scc1  L_SAVE_VGPR_LOOP						    //VGPR save is complete?
    s_set_gpr_idx_off
L_SAVE_VGPR_LOOP_END:

	s_and_b32 s_save_buf_rsrc1, s_save_buf_rsrc1, 0x0000FFFF   // reset const stride to 0
	s_or_b32  s_save_buf_rsrc1, s_save_buf_rsrc1, S_SAVE_BUF_RSRC_WORD1_STRIDE  // reset const stride to 4 bytes
else
    // VGPR store using dw burst
    s_mov_b32	      m0, 0x4	//VGPR initial index value =0
    s_cmp_lt_u32      m0, s_save_alloc_size
    s_cbranch_scc0    L_SAVE_VGPR_END


    s_set_gpr_idx_on	m0, 0x1 //M0[7:0] = M0[7:0] and M0[15:12] = 0x1
    s_add_u32	    s_save_alloc_size, s_save_alloc_size, 0x1000		    //add 0x1000 since we compare m0 against it later

  L_SAVE_VGPR_LOOP:
    v_mov_b32	    v0, v0		//v0 = v[0+m0]
    v_mov_b32	    v1, v1		//v0 = v[0+m0]
    v_mov_b32	    v2, v2		//v0 = v[0+m0]
    v_mov_b32	    v3, v3		//v0 = v[0+m0]

    if(USE_MTBUF_INSTEAD_OF_MUBUF)
	tbuffer_store_format_x v0, v0, s_save_buf_rsrc0, s_save_mem_offset format:BUF_NUM_FORMAT_FLOAT format: BUF_DATA_FORMAT_32 slc:1 glc:1
    else
	buffer_store_dword v0, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1
	buffer_store_dword v1, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1  offset:256
	buffer_store_dword v2, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1  offset:256*2
	buffer_store_dword v3, v0, s_save_buf_rsrc0, s_save_mem_offset slc:1 glc:1  offset:256*3
    end

    s_add_u32	    m0, m0, 4							    //next vgpr index
    s_add_u32	    s_save_mem_offset, s_save_mem_offset, 256*4			    //every buffer_store_dword does 256 bytes
    s_cmp_lt_u32    m0, s_save_alloc_size					    //scc = (m0 < s_save_alloc_size) ? 1 : 0
    s_cbranch_scc1  L_SAVE_VGPR_LOOP						    //VGPR save is complete?
    s_set_gpr_idx_off
end

L_SAVE_VGPR_END:


    /*	   S_PGM_END_SAVED  */				    //FIXME  graphics ONLY
    if ((EMU_RUN_HACK) && (!EMU_RUN_HACK_SAVE_NORMAL_EXIT))
	s_and_b32 s_save_pc_hi, s_save_pc_hi, 0x0000ffff    //pc[47:32]
	s_add_u32 s_save_pc_lo, s_save_pc_lo, 4		    //pc[31:0]+4
	s_addc_u32 s_save_pc_hi, s_save_pc_hi, 0x0	    //carry bit over
	s_rfe_b64 s_save_pc_lo				    //Return to the main shader program
    else
    end

// Save Done timestamp
if G8SR_DEBUG_TIMESTAMP
	s_memrealtime	s_g8sr_ts_save_d
	// SGPR SR memory offset : size(VGPR)
	get_vgpr_size_bytes(s_save_mem_offset)
	s_add_u32 s_save_mem_offset, s_save_mem_offset, G8SR_DEBUG_TS_SAVE_D_OFFSET
	s_waitcnt lgkmcnt(0)	     //FIXME, will cause xnack??
	// Need reset rsrc2??
	s_mov_b32 m0, s_save_mem_offset
	s_mov_b32 s_save_buf_rsrc2,  0x1000000					//NUM_RECORDS in bytes
	s_buffer_store_dwordx2 s_g8sr_ts_save_d, s_save_buf_rsrc0, m0	    glc:1
end


    s_branch	L_END_PGM


/**************************************************************************/
/*			restore routine					  */
/**************************************************************************/

L_RESTORE:
    /*	    Setup Resource Contants    */
    if ((EMU_RUN_HACK) && (!EMU_RUN_HACK_RESTORE_NORMAL))
	//calculate wd_addr using absolute thread id
	v_readlane_b32 s_restore_tmp, v9, 0
	s_lshr_b32 s_restore_tmp, s_restore_tmp, 6
	s_mul_i32 s_restore_tmp, s_restore_tmp, WAVE_SPACE
	s_add_i32 s_restore_spi_init_lo, s_restore_tmp, WG_BASE_ADDR_LO
	s_mov_b32 s_restore_spi_init_hi, WG_BASE_ADDR_HI
	s_and_b32 s_restore_spi_init_hi, s_restore_spi_init_hi, CTX_RESTORE_CONTROL
    else
    end

if G8SR_DEBUG_TIMESTAMP
	s_memrealtime	s_g8sr_ts_restore_s
	s_waitcnt lgkmcnt(0)	     //FIXME, will cause xnack??
	// tma_lo/hi are sgpr 110, 111, which will not used for 112 SGPR allocated case...
	s_mov_b32 s_restore_pc_lo, s_g8sr_ts_restore_s[0]
	s_mov_b32 s_restore_pc_hi, s_g8sr_ts_restore_s[1]   //backup ts to ttmp0/1, sicne exec will be finally restored..
end


    s_mov_b32	    s_restore_buf_rsrc0,    s_restore_spi_init_lo							    //base_addr_lo
    s_and_b32	    s_restore_buf_rsrc1,    s_restore_spi_init_hi, 0x0000FFFF						    //base_addr_hi
    s_or_b32	    s_restore_buf_rsrc1,    s_restore_buf_rsrc1,  S_RESTORE_BUF_RSRC_WORD1_STRIDE
    s_mov_b32	    s_restore_buf_rsrc2,    0										    //NUM_RECORDS initial value = 0 (in bytes)
    s_mov_b32	    s_restore_buf_rsrc3,    S_RESTORE_BUF_RSRC_WORD3_MISC
    s_and_b32	    s_restore_tmp,	    s_restore_spi_init_hi, S_RESTORE_SPI_INIT_ATC_MASK
    s_lshr_b32	    s_restore_tmp,	    s_restore_tmp, (S_RESTORE_SPI_INIT_ATC_SHIFT-SQ_BUF_RSRC_WORD1_ATC_SHIFT)	    //get ATC bit into position
    s_or_b32	    s_restore_buf_rsrc3,    s_restore_buf_rsrc3,  s_restore_tmp						    //or ATC
    s_and_b32	    s_restore_tmp,	    s_restore_spi_init_hi, S_RESTORE_SPI_INIT_MTYPE_MASK
    s_lshr_b32	    s_restore_tmp,	    s_restore_tmp, (S_RESTORE_SPI_INIT_MTYPE_SHIFT-SQ_BUF_RSRC_WORD3_MTYPE_SHIFT)   //get MTYPE bits into position
    s_or_b32	    s_restore_buf_rsrc3,    s_restore_buf_rsrc3,  s_restore_tmp						    //or MTYPE

    /*	    global mem offset		*/
//  s_mov_b32	    s_restore_mem_offset, 0x0				    //mem offset initial value = 0

    /*	    the first wave in the threadgroup	 */
    s_and_b32	    s_restore_tmp, s_restore_spi_init_hi, S_RESTORE_SPI_INIT_FIRST_WAVE_MASK
    s_cbranch_scc0  L_RESTORE_VGPR

    /*		restore LDS	*/
    //////////////////////////////
  L_RESTORE_LDS:

    s_mov_b32	    exec_lo, 0xFFFFFFFF							    //need every thread from now on   //be consistent with SAVE although can be moved ahead
    s_mov_b32	    exec_hi, 0xFFFFFFFF

    s_getreg_b32    s_restore_alloc_size, hwreg(HW_REG_LDS_ALLOC,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT,SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE)		//lds_size
    s_and_b32	    s_restore_alloc_size, s_restore_alloc_size, 0xFFFFFFFF		    //lds_size is zero?
    s_cbranch_scc0  L_RESTORE_VGPR							    //no lds used? jump to L_RESTORE_VGPR
    s_lshl_b32	    s_restore_alloc_size, s_restore_alloc_size, 6			    //LDS size in dwords = lds_size * 64dw
    s_lshl_b32	    s_restore_alloc_size, s_restore_alloc_size, 2			    //LDS size in bytes
    s_mov_b32	    s_restore_buf_rsrc2,    s_restore_alloc_size			    //NUM_RECORDS in bytes

    // LDS at offset: size(VGPR)+SIZE(SGPR)+SIZE(HWREG)
    //
    get_vgpr_size_bytes(s_restore_mem_offset)
    get_sgpr_size_bytes(s_restore_tmp)
    s_add_u32  s_restore_mem_offset, s_restore_mem_offset, s_restore_tmp
    s_add_u32  s_restore_mem_offset, s_restore_mem_offset, get_hwreg_size_bytes()	     //FIXME, Check if offset overflow???


    if (SWIZZLE_EN)
	s_add_u32	s_restore_buf_rsrc2, s_restore_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_restore_buf_rsrc2,  0x1000000					    //NUM_RECORDS in bytes
    end
    s_mov_b32	    m0, 0x0								    //lds_offset initial value = 0

  L_RESTORE_LDS_LOOP:
    if (SAVE_LDS)
	buffer_load_dword   v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset lds:1		       // first 64DW
	buffer_load_dword   v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset lds:1 offset:256	       // second 64DW
    end
    s_add_u32	    m0, m0, 256*2						// 128 DW
    s_add_u32	    s_restore_mem_offset, s_restore_mem_offset, 256*2		//mem offset increased by 128DW
    s_cmp_lt_u32    m0, s_restore_alloc_size					//scc=(m0 < s_restore_alloc_size) ? 1 : 0
    s_cbranch_scc1  L_RESTORE_LDS_LOOP							    //LDS restore is complete?


    /*		restore VGPRs	    */
    //////////////////////////////
  L_RESTORE_VGPR:
	// VGPR SR memory offset : 0
    s_mov_b32	    s_restore_mem_offset, 0x0
    s_mov_b32	    exec_lo, 0xFFFFFFFF							    //need every thread from now on   //be consistent with SAVE although can be moved ahead
    s_mov_b32	    exec_hi, 0xFFFFFFFF

    s_getreg_b32    s_restore_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE)	//vpgr_size
    s_add_u32	    s_restore_alloc_size, s_restore_alloc_size, 1
    s_lshl_b32	    s_restore_alloc_size, s_restore_alloc_size, 2			    //Number of VGPRs = (vgpr_size + 1) * 4    (non-zero value)
    s_lshl_b32	    s_restore_buf_rsrc2,  s_restore_alloc_size, 8			    //NUM_RECORDS in bytes (64 threads*4)
    if (SWIZZLE_EN)
	s_add_u32	s_restore_buf_rsrc2, s_restore_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_restore_buf_rsrc2,  0x1000000					    //NUM_RECORDS in bytes
    end

if G8SR_VGPR_SR_IN_DWX4
     get_vgpr_size_bytes(s_restore_mem_offset)
     s_sub_u32	       s_restore_mem_offset, s_restore_mem_offset, 256*4

     // the const stride for DWx4 is 4*4 bytes
     s_and_b32 s_restore_buf_rsrc1, s_restore_buf_rsrc1, 0x0000FFFF   // reset const stride to 0
     s_or_b32  s_restore_buf_rsrc1, s_restore_buf_rsrc1, G8SR_RESTORE_BUF_RSRC_WORD1_STRIDE_DWx4  // const stride to 4*4 bytes

     s_mov_b32	       m0, s_restore_alloc_size
     s_set_gpr_idx_on  m0, 0x8	  // Note.. This will change m0

L_RESTORE_VGPR_LOOP:
     buffer_load_dwordx4 v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1
     s_waitcnt vmcnt(0)
     s_sub_u32	       m0, m0, 4
     v_mov_b32	       v0, v0	// v[0+m0] = v0
     v_mov_b32	       v1, v1
     v_mov_b32	       v2, v2
     v_mov_b32	       v3, v3
     s_sub_u32	       s_restore_mem_offset, s_restore_mem_offset, 256*4
     s_cmp_eq_u32      m0, 0x8000
     s_cbranch_scc0    L_RESTORE_VGPR_LOOP
     s_set_gpr_idx_off

     s_and_b32 s_restore_buf_rsrc1, s_restore_buf_rsrc1, 0x0000FFFF   // reset const stride to 0
     s_or_b32  s_restore_buf_rsrc1, s_restore_buf_rsrc1, S_RESTORE_BUF_RSRC_WORD1_STRIDE  // const stride to 4*4 bytes

else
    // VGPR load using dw burst
    s_mov_b32	    s_restore_mem_offset_save, s_restore_mem_offset	// restore start with v1, v0 will be the last
    s_add_u32	    s_restore_mem_offset, s_restore_mem_offset, 256*4
    s_mov_b32	    m0, 4				//VGPR initial index value = 1
    s_set_gpr_idx_on  m0, 0x8			    //M0[7:0] = M0[7:0] and M0[15:12] = 0x8
    s_add_u32	    s_restore_alloc_size, s_restore_alloc_size, 0x8000			    //add 0x8000 since we compare m0 against it later

  L_RESTORE_VGPR_LOOP:
    if(USE_MTBUF_INSTEAD_OF_MUBUF)
	tbuffer_load_format_x v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset format:BUF_NUM_FORMAT_FLOAT format: BUF_DATA_FORMAT_32 slc:1 glc:1
    else
	buffer_load_dword v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1
	buffer_load_dword v1, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 offset:256
	buffer_load_dword v2, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 offset:256*2
	buffer_load_dword v3, v0, s_restore_buf_rsrc0, s_restore_mem_offset slc:1 glc:1 offset:256*3
    end
    s_waitcnt	    vmcnt(0)								    //ensure data ready
    v_mov_b32	    v0, v0								    //v[0+m0] = v0
    v_mov_b32	    v1, v1
    v_mov_b32	    v2, v2
    v_mov_b32	    v3, v3
    s_add_u32	    m0, m0, 4								    //next vgpr index
    s_add_u32	    s_restore_mem_offset, s_restore_mem_offset, 256*4				//every buffer_load_dword does 256 bytes
    s_cmp_lt_u32    m0, s_restore_alloc_size						    //scc = (m0 < s_restore_alloc_size) ? 1 : 0
    s_cbranch_scc1  L_RESTORE_VGPR_LOOP							    //VGPR restore (except v0) is complete?
    s_set_gpr_idx_off
											    /* VGPR restore on v0 */
    if(USE_MTBUF_INSTEAD_OF_MUBUF)
	tbuffer_load_format_x v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save format:BUF_NUM_FORMAT_FLOAT format: BUF_DATA_FORMAT_32 slc:1 glc:1
    else
	buffer_load_dword v0, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save    slc:1 glc:1
	buffer_load_dword v1, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save    slc:1 glc:1 offset:256
	buffer_load_dword v2, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save    slc:1 glc:1 offset:256*2
	buffer_load_dword v3, v0, s_restore_buf_rsrc0, s_restore_mem_offset_save    slc:1 glc:1 offset:256*3
    end

end

    /*		restore SGPRs	    */
    //////////////////////////////

    // SGPR SR memory offset : size(VGPR)
    get_vgpr_size_bytes(s_restore_mem_offset)
    get_sgpr_size_bytes(s_restore_tmp)
    s_add_u32 s_restore_mem_offset, s_restore_mem_offset, s_restore_tmp
    s_sub_u32 s_restore_mem_offset, s_restore_mem_offset, 16*4	   // restore SGPR from S[n] to S[0], by 16 sgprs group
    // TODO, change RSRC word to rearrange memory layout for SGPRS

    s_getreg_b32    s_restore_alloc_size, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE)		    //spgr_size
    s_add_u32	    s_restore_alloc_size, s_restore_alloc_size, 1
    s_lshl_b32	    s_restore_alloc_size, s_restore_alloc_size, 4			    //Number of SGPRs = (sgpr_size + 1) * 16   (non-zero value)

    if (SGPR_SAVE_USE_SQC)
	s_lshl_b32	s_restore_buf_rsrc2,	s_restore_alloc_size, 2			    //NUM_RECORDS in bytes
    else
	s_lshl_b32	s_restore_buf_rsrc2,	s_restore_alloc_size, 8			    //NUM_RECORDS in bytes (64 threads)
    end
    if (SWIZZLE_EN)
	s_add_u32	s_restore_buf_rsrc2, s_restore_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_restore_buf_rsrc2,  0x1000000					    //NUM_RECORDS in bytes
    end

    s_mov_b32 m0, s_restore_alloc_size

 L_RESTORE_SGPR_LOOP:
    read_16sgpr_from_mem(s0, s_restore_buf_rsrc0, s_restore_mem_offset)	 //PV: further performance improvement can be made
    s_waitcnt	    lgkmcnt(0)								    //ensure data ready

    s_sub_u32 m0, m0, 16    // Restore from S[n] to S[0]
    s_nop 0 // hazard SALU M0=> S_MOVREL

    s_movreld_b64   s0, s0	//s[0+m0] = s0
    s_movreld_b64   s2, s2
    s_movreld_b64   s4, s4
    s_movreld_b64   s6, s6
    s_movreld_b64   s8, s8
    s_movreld_b64   s10, s10
    s_movreld_b64   s12, s12
    s_movreld_b64   s14, s14

    s_cmp_eq_u32    m0, 0		//scc = (m0 < s_restore_alloc_size) ? 1 : 0
    s_cbranch_scc0  L_RESTORE_SGPR_LOOP		    //SGPR restore (except s0) is complete?

    /*	    restore HW registers    */
    //////////////////////////////
  L_RESTORE_HWREG:


if G8SR_DEBUG_TIMESTAMP
      s_mov_b32 s_g8sr_ts_restore_s[0], s_restore_pc_lo
      s_mov_b32 s_g8sr_ts_restore_s[1], s_restore_pc_hi
end

    // HWREG SR memory offset : size(VGPR)+size(SGPR)
    get_vgpr_size_bytes(s_restore_mem_offset)
    get_sgpr_size_bytes(s_restore_tmp)
    s_add_u32 s_restore_mem_offset, s_restore_mem_offset, s_restore_tmp


    s_mov_b32	    s_restore_buf_rsrc2, 0x4						    //NUM_RECORDS   in bytes
    if (SWIZZLE_EN)
	s_add_u32	s_restore_buf_rsrc2, s_restore_buf_rsrc2, 0x0			    //FIXME need to use swizzle to enable bounds checking?
    else
	s_mov_b32	s_restore_buf_rsrc2,  0x1000000					    //NUM_RECORDS in bytes
    end

    read_hwreg_from_mem(s_restore_m0, s_restore_buf_rsrc0, s_restore_mem_offset)		    //M0
    read_hwreg_from_mem(s_restore_pc_lo, s_restore_buf_rsrc0, s_restore_mem_offset)		//PC
    read_hwreg_from_mem(s_restore_pc_hi, s_restore_buf_rsrc0, s_restore_mem_offset)
    read_hwreg_from_mem(s_restore_exec_lo, s_restore_buf_rsrc0, s_restore_mem_offset)		    //EXEC
    read_hwreg_from_mem(s_restore_exec_hi, s_restore_buf_rsrc0, s_restore_mem_offset)
    read_hwreg_from_mem(s_restore_status, s_restore_buf_rsrc0, s_restore_mem_offset)		    //STATUS
    read_hwreg_from_mem(s_restore_trapsts, s_restore_buf_rsrc0, s_restore_mem_offset)		    //TRAPSTS
    read_hwreg_from_mem(xnack_mask_lo, s_restore_buf_rsrc0, s_restore_mem_offset)		    //XNACK_MASK_LO
    read_hwreg_from_mem(xnack_mask_hi, s_restore_buf_rsrc0, s_restore_mem_offset)		    //XNACK_MASK_HI
    read_hwreg_from_mem(s_restore_mode, s_restore_buf_rsrc0, s_restore_mem_offset)		//MODE

    s_waitcnt	    lgkmcnt(0)											    //from now on, it is safe to restore STATUS and IB_STS

    //for normal save & restore, the saved PC points to the next inst to execute, no adjustment needs to be made, otherwise:
    if ((EMU_RUN_HACK) && (!EMU_RUN_HACK_RESTORE_NORMAL))
	s_add_u32 s_restore_pc_lo, s_restore_pc_lo, 8		 //pc[31:0]+8	  //two back-to-back s_trap are used (first for save and second for restore)
	s_addc_u32  s_restore_pc_hi, s_restore_pc_hi, 0x0	 //carry bit over
    end
    if ((EMU_RUN_HACK) && (EMU_RUN_HACK_RESTORE_NORMAL))
	s_add_u32 s_restore_pc_lo, s_restore_pc_lo, 4		 //pc[31:0]+4	  // save is hack through s_trap but restore is normal
	s_addc_u32  s_restore_pc_hi, s_restore_pc_hi, 0x0	 //carry bit over
    end

    s_mov_b32	    m0,		s_restore_m0
    s_mov_b32	    exec_lo,	s_restore_exec_lo
    s_mov_b32	    exec_hi,	s_restore_exec_hi

    s_and_b32	    s_restore_m0, SQ_WAVE_TRAPSTS_PRE_SAVECTX_MASK, s_restore_trapsts
    s_setreg_b32    hwreg(HW_REG_TRAPSTS, SQ_WAVE_TRAPSTS_PRE_SAVECTX_SHIFT, SQ_WAVE_TRAPSTS_PRE_SAVECTX_SIZE), s_restore_m0
    s_and_b32	    s_restore_m0, SQ_WAVE_TRAPSTS_POST_SAVECTX_MASK, s_restore_trapsts
    s_lshr_b32	    s_restore_m0, s_restore_m0, SQ_WAVE_TRAPSTS_POST_SAVECTX_SHIFT
    s_setreg_b32    hwreg(HW_REG_TRAPSTS, SQ_WAVE_TRAPSTS_POST_SAVECTX_SHIFT, SQ_WAVE_TRAPSTS_POST_SAVECTX_SIZE), s_restore_m0
    //s_setreg_b32  hwreg(HW_REG_TRAPSTS),  s_restore_trapsts	   //don't overwrite SAVECTX bit as it may be set through external SAVECTX during restore
    s_setreg_b32    hwreg(HW_REG_MODE),	    s_restore_mode

    // Restore trap temporaries 6-11, 13-15 initialized by SPI debug dispatch logic
    // ttmp SR memory offset : size(VGPR)+size(SGPR)+0x40
    get_vgpr_size_bytes(s_restore_ttmps_lo)
    get_sgpr_size_bytes(s_restore_ttmps_hi)
    s_add_u32	    s_restore_ttmps_lo, s_restore_ttmps_lo, s_restore_ttmps_hi
    s_add_u32	    s_restore_ttmps_lo, s_restore_ttmps_lo, s_restore_buf_rsrc0
    s_addc_u32	    s_restore_ttmps_hi, s_restore_buf_rsrc1, 0x0
    s_and_b32	    s_restore_ttmps_hi, s_restore_ttmps_hi, 0xFFFF
    s_load_dwordx2  [ttmp6, ttmp7], [s_restore_ttmps_lo, s_restore_ttmps_hi], 0x40 glc:1
    s_load_dwordx4  [ttmp8, ttmp9, ttmp10, ttmp11], [s_restore_ttmps_lo, s_restore_ttmps_hi], 0x48 glc:1
    s_load_dword    ttmp13, [s_restore_ttmps_lo, s_restore_ttmps_hi], 0x58 glc:1
    s_load_dwordx2  [ttmp14, ttmp15], [s_restore_ttmps_lo, s_restore_ttmps_hi], 0x5C glc:1
    s_waitcnt	    lgkmcnt(0)

    //reuse s_restore_m0 as a temp register
    s_and_b32	    s_restore_m0, s_restore_pc_hi, S_SAVE_PC_HI_RCNT_MASK
    s_lshr_b32	    s_restore_m0, s_restore_m0, S_SAVE_PC_HI_RCNT_SHIFT
    s_lshl_b32	    s_restore_m0, s_restore_m0, SQ_WAVE_IB_STS_RCNT_SHIFT
    s_mov_b32	    s_restore_tmp, 0x0										    //IB_STS is zero
    s_or_b32	    s_restore_tmp, s_restore_tmp, s_restore_m0
    s_and_b32	    s_restore_m0, s_restore_pc_hi, S_SAVE_PC_HI_FIRST_REPLAY_MASK
    s_lshr_b32	    s_restore_m0, s_restore_m0, S_SAVE_PC_HI_FIRST_REPLAY_SHIFT
    s_lshl_b32	    s_restore_m0, s_restore_m0, SQ_WAVE_IB_STS_FIRST_REPLAY_SHIFT
    s_or_b32	    s_restore_tmp, s_restore_tmp, s_restore_m0
    s_and_b32	    s_restore_m0, s_restore_status, SQ_WAVE_STATUS_INST_ATC_MASK
    s_lshr_b32	    s_restore_m0, s_restore_m0, SQ_WAVE_STATUS_INST_ATC_SHIFT
    s_setreg_b32    hwreg(HW_REG_IB_STS),   s_restore_tmp

    s_and_b32 s_restore_pc_hi, s_restore_pc_hi, 0x0000ffff	//pc[47:32]	   //Do it here in order not to affect STATUS
    s_and_b64	 exec, exec, exec  // Restore STATUS.EXECZ, not writable by s_setreg_b32
    s_and_b64	 vcc, vcc, vcc	// Restore STATUS.VCCZ, not writable by s_setreg_b32
    set_status_without_spi_prio(s_restore_status, s_restore_tmp) // SCC is included, which is changed by previous salu

    s_barrier							//barrier to ensure the readiness of LDS before access attempts from any other wave in the same TG //FIXME not performance-optimal at this time

if G8SR_DEBUG_TIMESTAMP
    s_memrealtime s_g8sr_ts_restore_d
    s_waitcnt lgkmcnt(0)
end

//  s_rfe_b64 s_restore_pc_lo					//Return to the main shader program and resume execution
    s_rfe_restore_b64  s_restore_pc_lo, s_restore_m0		// s_restore_m0[0] is used to set STATUS.inst_atc


/**************************************************************************/
/*			the END						  */
/**************************************************************************/
L_END_PGM:
    s_endpgm

end


/**************************************************************************/
/*			the helper functions				  */
/**************************************************************************/

//Only for save hwreg to mem
function write_hwreg_to_mem(s, s_rsrc, s_mem_offset)
	s_mov_b32 exec_lo, m0			//assuming exec_lo is not needed anymore from this point on
	s_mov_b32 m0, s_mem_offset
	s_buffer_store_dword s, s_rsrc, m0	glc:1
	ack_sqc_store_workaround()
	s_add_u32	s_mem_offset, s_mem_offset, 4
	s_mov_b32   m0, exec_lo
end


// HWREG are saved before SGPRs, so all HWREG could be use.
function write_16sgpr_to_mem(s, s_rsrc, s_mem_offset)

	s_buffer_store_dwordx4 s[0], s_rsrc, 0	glc:1
	ack_sqc_store_workaround()
	s_buffer_store_dwordx4 s[4], s_rsrc, 16	 glc:1
	ack_sqc_store_workaround()
	s_buffer_store_dwordx4 s[8], s_rsrc, 32	 glc:1
	ack_sqc_store_workaround()
	s_buffer_store_dwordx4 s[12], s_rsrc, 48 glc:1
	ack_sqc_store_workaround()
	s_add_u32	s_rsrc[0], s_rsrc[0], 4*16
	s_addc_u32	s_rsrc[1], s_rsrc[1], 0x0	      // +scc
end


function read_hwreg_from_mem(s, s_rsrc, s_mem_offset)
    s_buffer_load_dword s, s_rsrc, s_mem_offset	    glc:1
    s_add_u32	    s_mem_offset, s_mem_offset, 4
end

function read_16sgpr_from_mem(s, s_rsrc, s_mem_offset)
    s_buffer_load_dwordx16 s, s_rsrc, s_mem_offset	glc:1
    s_sub_u32	    s_mem_offset, s_mem_offset, 4*16
end


function get_lds_size_bytes(s_lds_size_byte)
    // SQ LDS granularity is 64DW, while PGM_RSRC2.lds_size is in granularity 128DW
    s_getreg_b32   s_lds_size_byte, hwreg(HW_REG_LDS_ALLOC, SQ_WAVE_LDS_ALLOC_LDS_SIZE_SHIFT, SQ_WAVE_LDS_ALLOC_LDS_SIZE_SIZE)		// lds_size
    s_lshl_b32	   s_lds_size_byte, s_lds_size_byte, 8			    //LDS size in dwords = lds_size * 64 *4Bytes    // granularity 64DW
end

function get_vgpr_size_bytes(s_vgpr_size_byte)
    s_getreg_b32   s_vgpr_size_byte, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_VGPR_SIZE_SIZE)	 //vpgr_size
    s_add_u32	   s_vgpr_size_byte, s_vgpr_size_byte, 1
    s_lshl_b32	   s_vgpr_size_byte, s_vgpr_size_byte, (2+8) //Number of VGPRs = (vgpr_size + 1) * 4 * 64 * 4	(non-zero value)   //FIXME for GFX, zero is possible
end

function get_sgpr_size_bytes(s_sgpr_size_byte)
    s_getreg_b32   s_sgpr_size_byte, hwreg(HW_REG_GPR_ALLOC,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SHIFT,SQ_WAVE_GPR_ALLOC_SGPR_SIZE_SIZE)	 //spgr_size
    s_add_u32	   s_sgpr_size_byte, s_sgpr_size_byte, 1
    s_lshl_b32	   s_sgpr_size_byte, s_sgpr_size_byte, 6 //Number of SGPRs = (sgpr_size + 1) * 16 *4   (non-zero value)
end

function get_hwreg_size_bytes
    return 128 //HWREG size 128 bytes
end

function ack_sqc_store_workaround
    if ACK_SQC_STORE
        s_waitcnt lgkmcnt(0)
    end
end

function set_status_without_spi_prio(status, tmp)
    // Do not restore STATUS.SPI_PRIO since scheduler may have raised it.
    s_lshr_b32      tmp, status, SQ_WAVE_STATUS_POST_SPI_PRIO_SHIFT
    s_setreg_b32    hwreg(HW_REG_STATUS, SQ_WAVE_STATUS_POST_SPI_PRIO_SHIFT, SQ_WAVE_STATUS_POST_SPI_PRIO_SIZE), tmp
    s_nop           0x2 // avoid S_SETREG => S_SETREG hazard
    s_setreg_b32    hwreg(HW_REG_STATUS, SQ_WAVE_STATUS_PRE_SPI_PRIO_SHIFT, SQ_WAVE_STATUS_PRE_SPI_PRIO_SIZE), status
end