[
    {
        "id": "6f5a",
        "name": "Add vlan pop action with pipe opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop pipe index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*pop.*pipe.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "df35",
        "name": "Add vlan pop action with pass opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop pass index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 8",
        "matchPattern": "action order [0-9]+: vlan.*pop.*pass.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "b0d4",
        "name": "Add vlan pop action with drop opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop drop index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 8",
        "matchPattern": "action order [0-9]+: vlan.*pop.*drop.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "95ee",
        "name": "Add vlan pop action with reclassify opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop reclassify index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 8",
        "matchPattern": "action order [0-9]+: vlan.*pop.*reclassify.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "0283",
        "name": "Add vlan pop action with continue opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop continue index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 8",
        "matchPattern": "action order [0-9]+: vlan.*pop.*continue.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "b6b9",
        "name": "Add vlan pop action with jump opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop jump 10 index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*jump 10.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "87c3",
        "name": "Add vlan pop action with trap opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop trap index 8",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*pop trap.*index 8 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "a178",
        "name": "Add vlan pop action with invalid opcode",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop foo index 8",
        "expExitCode": "255",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*pop.*foo.*index 8 ref",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "ee6f",
        "name": "Add vlan pop action with index at 32-bit maximum",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop index 4294967295",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*pop.*index 4294967295 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "0dfa",
        "name": "Add vlan pop action with index exceeding 32-bit maximum",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan pop reclassify index 429496729599",
        "expExitCode": "255",
        "verifyCmd": "$TC actions get action vlan index 429496729599",
        "matchPattern": "action order [0-9]+: vlan.*pop.reclassify.*index 429496729599",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "2b91",
        "name": "Add vlan invalid action",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan bad_mode",
        "expExitCode": "255",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*bad_mode",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "57fc",
        "name": "Add vlan push action with invalid protocol type",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push protocol ABCD",
        "expExitCode": "255",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*push",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "3989",
        "name": "Add vlan push action with default protocol and priority",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 123 index 18",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 18",
        "matchPattern": "action order [0-9]+: vlan.*push id 123 protocol 802.1Q priority 0 pipe.*index 18 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "79dc",
        "name": "Add vlan push action with protocol 802.1Q and priority 3",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 77 protocol 802.1Q priority 3 continue index 734",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 734",
        "matchPattern": "action order [0-9]+: vlan.*push id 77 protocol 802.1Q priority 3 continue.*index 734 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "4d73",
        "name": "Add vlan push action with protocol 802.1AD",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 1024 protocol 802.1AD pass index 10000",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 10000",
        "matchPattern": "action order [0-9]+: vlan.*push id 1024 protocol 802.1ad priority 0 pass.*index 10000 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "1f4b",
        "name": "Add vlan push action with maximum 12-bit vlan ID",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 4094 index 1",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 1",
        "matchPattern": "action order [0-9]+: vlan.*push id 4094.*protocol 802.1Q.*priority 0.*index 1 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "1f7b",
        "name": "Add vlan push action with invalid vlan ID",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 5678 index 1",
        "expExitCode": "255",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*push id 5678.*index 1 ref",
        "matchCount": "0",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "fe40",
        "name": "Add vlan push action with maximum 3-bit IEEE 802.1p priority",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 4 priority 7 reclassify index 1",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 1",
        "matchPattern": "action order [0-9]+: vlan.*push id 4.*protocol 802.1Q.*priority 7.*reclassify.*index 1 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "5d02",
        "name": "Add vlan push action with invalid IEEE 802.1p priority",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 5 priority 10 index 1",
        "expExitCode": "255",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*push id 5.*index 1 ref",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "6812",
        "name": "Add vlan modify action for protocol 802.1Q",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan modify protocol 802.1Q id 5 index 100",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 100",
        "matchPattern": "action order [0-9]+: vlan.*modify id 100 protocol 802.1Q priority 0 pipe.*index 100 ref",
        "matchCount": "0",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "5a31",
        "name": "Add vlan modify action for protocol 802.1AD",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan modify protocol 802.1ad id 500 reclassify index 12",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 12",
        "matchPattern": "action order [0-9]+: vlan.*modify id 500 protocol 802.1ad priority 0 reclassify.*index 12 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "3deb",
        "name": "Replace existing vlan push action with new ID",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan push id 500 pipe index 12"
        ],
        "cmdUnderTest": "$TC actions replace action vlan push id 700 pipe index 12",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 12",
        "matchPattern": "action order [0-9]+: vlan.*push id 700 protocol 802.1Q priority 0 pipe.*index 12 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "9e76",
        "name": "Replace existing vlan push action with new protocol",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan push id 1 protocol 802.1Q pipe index 1"
        ],
        "cmdUnderTest": "$TC actions replace action vlan push id 1 protocol 802.1ad pipe index 1",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 1",
        "matchPattern": "action order [0-9]+: vlan.*push id 1 protocol 802.1ad priority 0 pipe.*index 1 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "ede4",
        "name": "Replace existing vlan push action with new priority",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan push id 1 protocol 802.1Q priority 3 reclassify index 1"
        ],
        "cmdUnderTest": "$TC actions replace action vlan push id 1 priority 4 reclassify index 1",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 1",
        "matchPattern": "action order [0-9]+: vlan.*push id 1 protocol 802.1Q priority 4 reclassify.*index 1 ref",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "d413",
        "name": "Replace existing vlan pop action with new cookie",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan pop continue index 1 cookie 22334455"
        ],
        "cmdUnderTest": "$TC actions replace action vlan pop continue index 1 cookie a1b1c2d1",
        "expExitCode": "0",
        "verifyCmd": "$TC actions get action vlan index 1",
        "matchPattern": "action order [0-9]+: vlan.*pop continue.*index 1 ref.*cookie a1b1c2d1",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    },
    {
        "id": "83a4",
        "name": "Delete vlan pop action",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan pop index 44"
        ],
        "cmdUnderTest": "$TC actions del action vlan index 44",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*pop.*index 44 ref",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "ed1e",
        "name": "Delete vlan push action for protocol 802.1Q",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan push id 4094 protocol 802.1Q index 999"
        ],
        "cmdUnderTest": "$TC actions del action vlan index 999",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*push id 4094 protocol 802.1Q priority 0 pipe.*index 999 ref",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "a2a3",
        "name": "Flush vlan actions",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ],
            "$TC actions add action vlan push id 4 protocol 802.1ad index 10",
            "$TC actions add action vlan push id 4 protocol 802.1ad index 11",
            "$TC actions add action vlan push id 4 protocol 802.1ad index 12",
            "$TC actions add action vlan push id 4 protocol 802.1ad index 13"
        ],
        "cmdUnderTest": "$TC actions flush action vlan",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*push id 4 protocol 802.1ad",
        "matchCount": "0",
        "teardown": []
    },
    {
        "id": "1d78",
        "name": "Add vlan push action with cookie",
        "category": [
            "actions",
            "vlan"
        ],
        "setup": [
            [
                "$TC actions flush action vlan",
                0,
                1,
                255
            ]
        ],
        "cmdUnderTest": "$TC actions add action vlan push id 4 cookie a0a0a0a0a0a0a0",
        "expExitCode": "0",
        "verifyCmd": "$TC actions list action vlan",
        "matchPattern": "action order [0-9]+: vlan.*push id 4.*cookie a0a0a0a0a0a0a0",
        "matchCount": "1",
        "teardown": [
            "$TC actions flush action vlan"
        ]
    }
]