| Broadcom BCM963XX ImageTag Partition Container |
| ============================================== |
| |
| Some Broadcom BCM63XX SoC based devices contain additional, non discoverable |
| partitions or non standard bootloader partition sizes. For these a mixed layout |
| needs to be used with an explicit firmware partition. |
| |
| The BCM963XX ImageTag is a simple firmware header describing the offsets and |
| sizes of the rootfs and kernel parts contained in the firmware. |
| |
| Required properties: |
| - compatible : must be "brcm,bcm963xx-imagetag" |
| |
| Example: |
| |
| flash@1e000000 { |
| compatible = "cfi-flash"; |
| reg = <0x1e000000 0x2000000>; |
| bank-width = <2>; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cfe@0 { |
| reg = <0x0 0x10000>; |
| read-only; |
| }; |
| |
| firmware@10000 { |
| reg = <0x10000 0x7d0000>; |
| compatible = "brcm,bcm963xx-imagetag"; |
| }; |
| |
| caldata@7e0000 { |
| reg = <0x7e0000 0x10000>; |
| read-only; |
| }; |
| |
| nvram@7f0000 { |
| reg = <0x7f0000 0x10000>; |
| }; |
| }; |
| }; |
