| BOE HV070WSA-100 7.01" WSVGA TFT LCD panel |
| |
| Required properties: |
| - compatible: should be "boe,hv070wsa-100" |
| - power-supply: regulator to provide the VCC supply voltage (3.3 volts) |
| - enable-gpios: GPIO pin to enable and disable panel (active high) |
| |
| This binding is compatible with the simple-panel binding, which is specified |
| in simple-panel.txt in this directory. |
| |
| The device node can contain one 'port' child node with one child |
| 'endpoint' node, according to the bindings defined in [1]. This |
| node should describe panel's video bus. |
| |
| [1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| |
| panel: panel { |
| compatible = "boe,hv070wsa-100"; |
| power-supply = <&vcc_3v3_reg>; |
| enable-gpios = <&gpd1 3 GPIO_ACTIVE_HIGH>; |
| port { |
| panel_ep: endpoint { |
| remote-endpoint = <&bridge_out_ep>; |
| }; |
| }; |
| }; |
