blob: a56a705d41f7dc3a240fe794eeb89b3d4c6d702c [file] [log] [blame]
/*
* T4240RDB Device Tree Source
*
* Copyright 2014 - 2015 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/include/ "t4240si-pre.dtsi"
/ {
model = "fsl,T4240RDB";
compatible = "fsl,T4240RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
sgmii_phy21 = &sgmiiphy21;
sgmii_phy22 = &sgmiiphy22;
sgmii_phy23 = &sgmiiphy23;
sgmii_phy24 = &sgmiiphy24;
sgmii_phy41 = &sgmiiphy41;
sgmii_phy42 = &sgmiiphy42;
sgmii_phy43 = &sgmiiphy43;
sgmii_phy44 = &sgmiiphy44;
};
ifc: localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x2000>;
ranges = <0 0 0xf 0xe8000000 0x08000000
2 0 0xf 0xff800000 0x00010000
3 0 0xf 0xffdf0000 0x00008000>;
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x8000000>;
bank-width = <2>;
device-width = <1>;
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x2 0x0 0x10000>;
};
};
memory {
device_type = "memory";
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
bman_fbpr: bman-fbpr {
size = <0 0x1000000>;
alignment = <0 0x1000000>;
};
qman_fqd: qman-fqd {
size = <0 0x400000>;
alignment = <0 0x400000>;
};
qman_pfdr: qman-pfdr {
size = <0 0x2000000>;
alignment = <0 0x2000000>;
};
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01072000>;
};
bportals: bman-portals@ff4000000 {
ranges = <0x0 0xf 0xf4000000 0x2000000>;
};
qportals: qman-portals@ff6000000 {
ranges = <0x0 0xf 0xf6000000 0x2000000>;
};
soc: soc@ffe000000 {
ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
reg = <0xf 0xfe000000 0 0x00001000>;
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25wf040", "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
};
};
i2c@118000 {
hwmon@2f {
compatible = "winbond,w83793";
reg = <0x2f>;
};
eeprom@52 {
compatible = "atmel,24c256";
reg = <0x52>;
};
eeprom@54 {
compatible = "atmel,24c256";
reg = <0x54>;
};
eeprom@56 {
compatible = "atmel,24c256";
reg = <0x56>;
};
rtc@68 {
compatible = "dallas,ds1374";
reg = <0x68>;
interrupts = <0x1 0x1 0 0>;
};
};
sdhc@114000 {
voltage-ranges = <1800 1800 3300 3300>;
};
fman@400000 {
ethernet@e0000 {
phy-handle = <&sgmiiphy21>;
phy-connection-type = "sgmii";
};
ethernet@e2000 {
phy-handle = <&sgmiiphy22>;
phy-connection-type = "sgmii";
};
ethernet@e4000 {
phy-handle = <&sgmiiphy23>;
phy-connection-type = "sgmii";
};
ethernet@e6000 {
phy-handle = <&sgmiiphy24>;
phy-connection-type = "sgmii";
};
ethernet@e8000 {
status = "disabled";
};
ethernet@ea000 {
status = "disabled";
};
ethernet@f0000 {
phy-handle = <&xfiphy1>;
phy-connection-type = "xgmii";
};
ethernet@f2000 {
phy-handle = <&xfiphy2>;
phy-connection-type = "xgmii";
};
};
fman@500000 {
ethernet@e0000 {
phy-handle = <&sgmiiphy41>;
phy-connection-type = "sgmii";
};
ethernet@e2000 {
phy-handle = <&sgmiiphy42>;
phy-connection-type = "sgmii";
};
ethernet@e4000 {
phy-handle = <&sgmiiphy43>;
phy-connection-type = "sgmii";
};
ethernet@e6000 {
phy-handle = <&sgmiiphy44>;
phy-connection-type = "sgmii";
};
ethernet@e8000 {
status = "disabled";
};
ethernet@ea000 {
status = "disabled";
};
ethernet@f0000 {
phy-handle = <&xfiphy3>;
phy-connection-type = "xgmii";
};
ethernet@f2000 {
phy-handle = <&xfiphy4>;
phy-connection-type = "xgmii";
};
mdio@fc000 {
sgmiiphy21: ethernet-phy@0 {
reg = <0x0>;
};
sgmiiphy22: ethernet-phy@1 {
reg = <0x1>;
};
sgmiiphy23: ethernet-phy@2 {
reg = <0x2>;
};
sgmiiphy24: ethernet-phy@3 {
reg = <0x3>;
};
sgmiiphy41: ethernet-phy@4 {
reg = <0x4>;
};
sgmiiphy42: ethernet-phy@5 {
reg = <0x5>;
};
sgmiiphy43: ethernet-phy@6 {
reg = <0x6>;
};
sgmiiphy44: ethernet-phy@7 {
reg = <0x7>;
};
};
mdio@fd000 {
xfiphy1: ethernet-phy@10 {
compatible = "ethernet-phy-id13e5.1002";
reg = <0x10>;
};
xfiphy2: ethernet-phy@11 {
compatible = "ethernet-phy-id13e5.1002";
reg = <0x11>;
};
xfiphy3: ethernet-phy@13 {
compatible = "ethernet-phy-id13e5.1002";
reg = <0x13>;
};
xfiphy4: ethernet-phy@12 {
compatible = "ethernet-phy-id13e5.1002";
reg = <0x12>;
};
};
};
};
pci0: pcie@ffe240000 {
reg = <0xf 0xfe240000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci1: pcie@ffe250000 {
reg = <0xf 0xfe250000 0 0x10000>;
ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci2: pcie@ffe260000 {
reg = <0xf 0xfe260000 0 0x1000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
pci3: pcie@ffe270000 {
reg = <0xf 0xfe270000 0 0x10000>;
ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xe0000000
0x02000000 0 0xe0000000
0 0x20000000
0x01000000 0 0x00000000
0x01000000 0 0x00000000
0 0x00010000>;
};
};
rio: rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
};
/include/ "t4240si-post.dtsi"