blob: 27554eaf6929821af86a44162e0ee599cf80159c [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2017 Icenowy Zheng <icenowy@aosc.xyz>
*/
#include <linux/clk-provider.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include "ccu_common.h"
#include "ccu_reset.h"
#include "ccu_div.h"
#include "ccu_gate.h"
#include "ccu_mp.h"
#include "ccu_nm.h"
#include "ccu-sun50i-h6-r.h"
/*
* Information about AR100 and AHB/APB clocks in R_CCU are gathered from
* clock definitions in the BSP source code.
*/
static const char * const ar100_r_apb2_parents[] = { "osc24M", "osc32k",
"pll-periph0", "iosc" };
static const struct ccu_mux_var_prediv ar100_r_apb2_predivs[] = {
{ .index = 2, .shift = 0, .width = 5 },
};
static struct ccu_div ar100_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = {
.shift = 24,
.width = 2,
.var_predivs = ar100_r_apb2_predivs,
.n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs),
},
.common = {
.reg = 0x000,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("ar100",
ar100_r_apb2_parents,
&ccu_div_ops,
0),
},
};
static CLK_FIXED_FACTOR(r_ahb_clk, "r-ahb", "ar100", 1, 1, 0);
static struct ccu_div r_apb1_clk = {
.div = _SUNXI_CCU_DIV(0, 2),
.common = {
.reg = 0x00c,
.hw.init = CLK_HW_INIT("r-apb1",
"r-ahb",
&ccu_div_ops,
0),
},
};
static struct ccu_div r_apb2_clk = {
.div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
.mux = {
.shift = 24,
.width = 2,
.var_predivs = ar100_r_apb2_predivs,
.n_var_predivs = ARRAY_SIZE(ar100_r_apb2_predivs),
},
.common = {
.reg = 0x010,
.features = CCU_FEATURE_VARIABLE_PREDIV,
.hw.init = CLK_HW_INIT_PARENTS("r-apb2",
ar100_r_apb2_parents,
&ccu_div_ops,
0),
},
};
/*
* Information about the gate/resets are gathered from the clock header file
* in the BSP source code, although most of them are unused. The existence
* of the hardware block is verified with "3.1 Memory Mapping" chapter in
* "Allwinner H6 V200 User Manual V1.1"; and the parent APB buses are verified
* with "3.3.2.1 System Bus Tree" chapter inthe same document.
*/
static SUNXI_CCU_GATE(r_apb1_timer_clk, "r-apb1-timer", "r-apb1",
0x11c, BIT(0), 0);
static SUNXI_CCU_GATE(r_apb1_twd_clk, "r-apb1-twd", "r-apb1",
0x12c, BIT(0), 0);
static SUNXI_CCU_GATE(r_apb1_pwm_clk, "r-apb1-pwm", "r-apb1",
0x13c, BIT(0), 0);
static SUNXI_CCU_GATE(r_apb2_uart_clk, "r-apb2-uart", "r-apb2",
0x18c, BIT(0), 0);
static SUNXI_CCU_GATE(r_apb2_i2c_clk, "r-apb2-i2c", "r-apb2",
0x19c, BIT(0), 0);
static SUNXI_CCU_GATE(r_apb1_ir_clk, "r-apb1-ir", "r-apb1",
0x1cc, BIT(0), 0);
static SUNXI_CCU_GATE(r_apb1_w1_clk, "r-apb1-w1", "r-apb1",
0x1cc, BIT(0), 0);
/* Information of IR(RX) mod clock is gathered from BSP source code */
static const char * const r_mod0_default_parents[] = { "osc32k", "osc24M" };
static SUNXI_CCU_MP_WITH_MUX_GATE(ir_clk, "ir",
r_mod0_default_parents, 0x1c0,
0, 5, /* M */
8, 2, /* P */
24, 1, /* mux */
BIT(31), /* gate */
0);
/*
* BSP didn't use the 1-wire function at all now, and the information about
* this mod clock is guessed from the IR mod clock above. The existence of
* this mod clock is proven by BSP clock header, and the dividers are verified
* by contents in the 1-wire related chapter of the User Manual.
*/
static SUNXI_CCU_MP_WITH_MUX_GATE(w1_clk, "w1",
r_mod0_default_parents, 0x1e0,
0, 5, /* M */
8, 2, /* P */
24, 1, /* mux */
BIT(31), /* gate */
0);
static struct ccu_common *sun50i_h6_r_ccu_clks[] = {
&ar100_clk.common,
&r_apb1_clk.common,
&r_apb2_clk.common,
&r_apb1_timer_clk.common,
&r_apb1_twd_clk.common,
&r_apb1_pwm_clk.common,
&r_apb2_uart_clk.common,
&r_apb2_i2c_clk.common,
&r_apb1_ir_clk.common,
&r_apb1_w1_clk.common,
&ir_clk.common,
&w1_clk.common,
};
static struct clk_hw_onecell_data sun50i_h6_r_hw_clks = {
.hws = {
[CLK_AR100] = &ar100_clk.common.hw,
[CLK_R_AHB] = &r_ahb_clk.hw,
[CLK_R_APB1] = &r_apb1_clk.common.hw,
[CLK_R_APB2] = &r_apb2_clk.common.hw,
[CLK_R_APB1_TIMER] = &r_apb1_timer_clk.common.hw,
[CLK_R_APB1_TWD] = &r_apb1_twd_clk.common.hw,
[CLK_R_APB1_PWM] = &r_apb1_pwm_clk.common.hw,
[CLK_R_APB2_UART] = &r_apb2_uart_clk.common.hw,
[CLK_R_APB2_I2C] = &r_apb2_i2c_clk.common.hw,
[CLK_R_APB1_IR] = &r_apb1_ir_clk.common.hw,
[CLK_R_APB1_W1] = &r_apb1_w1_clk.common.hw,
[CLK_IR] = &ir_clk.common.hw,
[CLK_W1] = &w1_clk.common.hw,
},
.num = CLK_NUMBER,
};
static struct ccu_reset_map sun50i_h6_r_ccu_resets[] = {
[RST_R_APB1_TIMER] = { 0x11c, BIT(16) },
[RST_R_APB1_TWD] = { 0x12c, BIT(16) },
[RST_R_APB1_PWM] = { 0x13c, BIT(16) },
[RST_R_APB2_UART] = { 0x18c, BIT(16) },
[RST_R_APB2_I2C] = { 0x19c, BIT(16) },
[RST_R_APB1_IR] = { 0x1cc, BIT(16) },
[RST_R_APB1_W1] = { 0x1ec, BIT(16) },
};
static const struct sunxi_ccu_desc sun50i_h6_r_ccu_desc = {
.ccu_clks = sun50i_h6_r_ccu_clks,
.num_ccu_clks = ARRAY_SIZE(sun50i_h6_r_ccu_clks),
.hw_clks = &sun50i_h6_r_hw_clks,
.resets = sun50i_h6_r_ccu_resets,
.num_resets = ARRAY_SIZE(sun50i_h6_r_ccu_resets),
};
static void __init sunxi_r_ccu_init(struct device_node *node,
const struct sunxi_ccu_desc *desc)
{
void __iomem *reg;
reg = of_io_request_and_map(node, 0, of_node_full_name(node));
if (IS_ERR(reg)) {
pr_err("%pOF: Could not map the clock registers\n", node);
return;
}
sunxi_ccu_probe(node, reg, desc);
}
static void __init sun50i_h6_r_ccu_setup(struct device_node *node)
{
sunxi_r_ccu_init(node, &sun50i_h6_r_ccu_desc);
}
CLK_OF_DECLARE(sun50i_h6_r_ccu, "allwinner,sun50i-h6-r-ccu",
sun50i_h6_r_ccu_setup);