blob: 750d04d9e2ae07bc320a90b5e2d495149c4de4a4 [file] [log] [blame]
menu "CAN USB interfaces"
depends on USB
config CAN_8DEV_USB
tristate "8 devices USB2CAN interface"
---help---
This driver supports the USB2CAN interface
from 8 devices (http://www.8devices.com).
config CAN_EMS_USB
tristate "EMS CPC-USB/ARM7 CAN/USB interface"
---help---
This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
config CAN_ESD_USB2
tristate "ESD USB/2 CAN/USB interface"
---help---
This driver supports the CAN-USB/2 interface
from esd electronic system design gmbh (http://www.esd.eu).
config CAN_GS_USB
tristate "Geschwister Schneider UG interfaces"
---help---
This driver supports the Geschwister Schneider and bytewerk.org
candleLight USB CAN interfaces USB/CAN devices
If unsure choose N,
choose Y for built in support,
M to compile as module (module will be named: gs_usb).
config CAN_KVASER_USB
tristate "Kvaser CAN/USB interface"
---help---
This driver adds support for Kvaser CAN/USB devices like Kvaser
Leaf Light, Kvaser USBcan II and Kvaser Memorator Pro 5xHS.
The driver provides support for the following devices:
- Kvaser Leaf Light
- Kvaser Leaf Professional HS
- Kvaser Leaf SemiPro HS
- Kvaser Leaf Professional LS
- Kvaser Leaf Professional SWC
- Kvaser Leaf Professional LIN
- Kvaser Leaf SemiPro LS
- Kvaser Leaf SemiPro SWC
- Kvaser Memorator II HS/HS
- Kvaser USBcan Professional HS/HS
- Kvaser Leaf Light GI
- Kvaser Leaf Professional HS (OBD-II connector)
- Kvaser Memorator Professional HS/LS
- Kvaser Leaf Light "China"
- Kvaser BlackBird SemiPro
- Kvaser USBcan R
- Kvaser Leaf Light v2
- Kvaser Mini PCI Express HS
- Kvaser Mini PCI Express 2xHS
- Kvaser USBcan Light 2xHS
- Kvaser USBcan II HS/HS
- Kvaser USBcan II HS/LS
- Kvaser USBcan Rugged ("USBcan Rev B")
- Kvaser Memorator HS/HS
- Kvaser Memorator HS/LS
- Scania VCI2 (if you have the Kvaser logo on top)
- Kvaser BlackBird v2
- Kvaser Leaf Pro HS v2
- Kvaser Hybrid 2xCAN/LIN
- Kvaser Hybrid Pro 2xCAN/LIN
- Kvaser Memorator 2xHS v2
- Kvaser Memorator Pro 2xHS v2
- Kvaser Memorator Pro 5xHS
- Kvaser USBcan Light 4xHS
- Kvaser USBcan Pro 2xHS v2
- Kvaser USBcan Pro 5xHS
- ATI Memorator Pro 2xHS v2
- ATI USBcan Pro 2xHS v2
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called kvaser_usb.
config CAN_MCBA_USB
tristate "Microchip CAN BUS Analyzer interface"
---help---
This driver supports the CAN BUS Analyzer interface
from Microchip (http://www.microchip.com/development-tools/).
config CAN_PEAK_USB
tristate "PEAK PCAN-USB/USB Pro interfaces for CAN 2.0b/CAN-FD"
---help---
This driver supports the PEAK-System Technik USB adapters that enable
access to the CAN bus, with repect to the CAN 2.0b and/or CAN-FD
standards, that is:
PCAN-USB single CAN 2.0b channel USB adapter
PCAN-USB Pro dual CAN 2.0b channels USB adapter
PCAN-USB FD single CAN-FD channel USB adapter
PCAN-USB Pro FD dual CAN-FD channels USB adapter
PCAN-Chip USB CAN-FD to USB stamp module
PCAN-USB X6 6 CAN-FD channels USB adapter
(see also http://www.peak-system.com).
config CAN_MCBA_USB
tristate "Microchip CAN BUS Analyzer interface"
---help---
This driver supports the CAN BUS Analyzer interface
from Microchip (http://www.microchip.com/development-tools/).
config CAN_UCAN
tristate "Theobroma Systems UCAN interface"
---help---
This driver supports the Theobroma Systems
UCAN USB-CAN interface.
The UCAN driver supports the microcontroller-based USB/CAN
adapters from Theobroma Systems. There are two form-factors
that run essentially the same firmware:
* Seal: standalone USB stick
https://www.theobroma-systems.com/seal)
* Mule: integrated on the PCB of various System-on-Modules
from Theobroma Systems like the A31-ยตQ7 and the RK3399-Q7
(https://www.theobroma-systems.com/rk3399-q7)
endmenu