blob: b3e0d8bb5cbd80f19852836c42512d3847215d41 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 1999 - 2018 Intel Corporation. */
#include "ixgbe.h"
#include <linux/ptp_classify.h>
#include <linux/clocksource.h>
/*
* The 82599 and the X540 do not have true 64bit nanosecond scale
* counter registers. Instead, SYSTIME is defined by a fixed point
* system which allows the user to define the scale counter increment
* value at every level change of the oscillator driving the SYSTIME
* value. For both devices the TIMINCA:IV field defines this
* increment. On the X540 device, 31 bits are provided. However on the
* 82599 only provides 24 bits. The time unit is determined by the
* clock frequency of the oscillator in combination with the TIMINCA
* register. When these devices link at 10Gb the oscillator has a
* period of 6.4ns. In order to convert the scale counter into
* nanoseconds the cyclecounter and timecounter structures are
* used. The SYSTIME registers need to be converted to ns values by use
* of only a right shift (division by power of 2). The following math
* determines the largest incvalue that will fit into the available
* bits in the TIMINCA register.
*
* PeriodWidth: Number of bits to store the clock period
* MaxWidth: The maximum width value of the TIMINCA register
* Period: The clock period for the oscillator
* round(): discard the fractional portion of the calculation
*
* Period * [ 2 ^ ( MaxWidth - PeriodWidth ) ]
*
* For the X540, MaxWidth is 31 bits, and the base period is 6.4 ns
* For the 82599, MaxWidth is 24 bits, and the base period is 6.4 ns
*
* The period also changes based on the link speed:
* At 10Gb link or no link, the period remains the same.
* At 1Gb link, the period is multiplied by 10. (64ns)
* At 100Mb link, the period is multiplied by 100. (640ns)
*
* The calculated value allows us to right shift the SYSTIME register
* value in order to quickly convert it into a nanosecond clock,
* while allowing for the maximum possible adjustment value.
*
* These diagrams are only for the 10Gb link period
*
* SYSTIMEH SYSTIMEL
* +--------------+ +--------------+
* X540 | 32 | | 1 | 3 | 28 |
* *--------------+ +--------------+
* \________ 36 bits ______/ fract
*
* +--------------+ +--------------+
* 82599 | 32 | | 8 | 3 | 21 |
* *--------------+ +--------------+
* \________ 43 bits ______/ fract
*
* The 36 bit X540 SYSTIME overflows every
* 2^36 * 10^-9 / 60 = 1.14 minutes or 69 seconds
*
* The 43 bit 82599 SYSTIME overflows every
* 2^43 * 10^-9 / 3600 = 2.4 hours
*/
#define IXGBE_INCVAL_10GB 0x66666666
#define IXGBE_INCVAL_1GB 0x40000000
#define IXGBE_INCVAL_100 0x50000000
#define IXGBE_INCVAL_SHIFT_10GB 28
#define IXGBE_INCVAL_SHIFT_1GB 24
#define IXGBE_INCVAL_SHIFT_100 21
#define IXGBE_INCVAL_SHIFT_82599 7
#define IXGBE_INCPER_SHIFT_82599 24
#define IXGBE_OVERFLOW_PERIOD (HZ * 30)
#define IXGBE_PTP_TX_TIMEOUT (HZ * 15)
/* half of a one second clock period, for use with PPS signal. We have to use
* this instead of something pre-defined like IXGBE_PTP_PPS_HALF_SECOND, in
* order to force at least 64bits of precision for shifting
*/
#define IXGBE_PTP_PPS_HALF_SECOND 500000000ULL
/* In contrast, the X550 controller has two registers, SYSTIMEH and SYSTIMEL
* which contain measurements of seconds and nanoseconds respectively. This
* matches the standard linux representation of time in the kernel. In addition,
* the X550 also has a SYSTIMER register which represents residue, or
* subnanosecond overflow adjustments. To control clock adjustment, the TIMINCA
* register is used, but it is unlike the X540 and 82599 devices. TIMINCA
* represents units of 2^-32 nanoseconds, and uses 31 bits for this, with the
* high bit representing whether the adjustent is positive or negative. Every
* clock cycle, the X550 will add 12.5 ns + TIMINCA which can result in a range
* of 12 to 13 nanoseconds adjustment. Unlike the 82599 and X540 devices, the
* X550's clock for purposes of SYSTIME generation is constant and not dependent
* on the link speed.
*
* SYSTIMEH SYSTIMEL SYSTIMER
* +--------------+ +--------------+ +-------------+
* X550 | 32 | | 32 | | 32 |
* *--------------+ +--------------+ +-------------+
* \____seconds___/ \_nanoseconds_/ \__2^-32 ns__/
*
* This results in a full 96 bits to represent the clock, with 32 bits for
* seconds, 32 bits for nanoseconds (largest value is 0d999999999 or just under
* 1 second) and an additional 32 bits to measure sub nanosecond adjustments for
* underflow of adjustments.
*
* The 32 bits of seconds for the X550 overflows every
* 2^32 / ( 365.25 * 24 * 60 * 60 ) = ~136 years.
*
* In order to adjust the clock frequency for the X550, the TIMINCA register is
* provided. This register represents a + or minus nearly 0.5 ns adjustment to
* the base frequency. It is measured in 2^-32 ns units, with the high bit being
* the sign bit. This register enables software to calculate frequency
* adjustments and apply them directly to the clock rate.
*
* The math for converting ppb into TIMINCA values is fairly straightforward.
* TIMINCA value = ( Base_Frequency * ppb ) / 1000000000ULL
*
* This assumes that ppb is never high enough to create a value bigger than
* TIMINCA's 31 bits can store. This is ensured by the stack. Calculating this
* value is also simple.
* Max ppb = ( Max Adjustment / Base Frequency ) / 1000000000ULL
*
* For the X550, the Max adjustment is +/- 0.5 ns, and the base frequency is
* 12.5 nanoseconds. This means that the Max ppb is 39999999
* Note: We subtract one in order to ensure no overflow, because the TIMINCA
* register can only hold slightly under 0.5 nanoseconds.
*
* Because TIMINCA is measured in 2^-32 ns units, we have to convert 12.5 ns
* into 2^-32 units, which is
*
* 12.5 * 2^32 = C80000000
*
* Some revisions of hardware have a faster base frequency than the registers
* were defined for. To fix this, we use a timecounter structure with the
* proper mult and shift to convert the cycles into nanoseconds of time.
*/
#define IXGBE_X550_BASE_PERIOD 0xC80000000ULL
#define INCVALUE_MASK 0x7FFFFFFF
#define ISGN 0x80000000
#define MAX_TIMADJ 0x7FFFFFFF
/**
* ixgbe_ptp_setup_sdp_x540
* @adapter: private adapter structure
*
* this function enables or disables the clock out feature on SDP0 for
* the X540 device. It will create a 1second periodic output that can
* be used as the PPS (via an interrupt).
*
* It calculates when the systime will be on an exact second, and then
* aligns the start of the PPS signal to that value. The shift is
* necessary because it can change based on the link speed.
*/
static void ixgbe_ptp_setup_sdp_x540(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
int shift = adapter->hw_cc.shift;
u32 esdp, tsauxc, clktiml, clktimh, trgttiml, trgttimh, rem;
u64 ns = 0, clock_edge = 0;
/* disable the pin first */
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, 0x0);
IXGBE_WRITE_FLUSH(hw);
if (!(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED))
return;
esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
/* enable the SDP0 pin as output, and connected to the
* native function for Timesync (ClockOut)
*/
esdp |= IXGBE_ESDP_SDP0_DIR |
IXGBE_ESDP_SDP0_NATIVE;
/* enable the Clock Out feature on SDP0, and allow
* interrupts to occur when the pin changes
*/
tsauxc = IXGBE_TSAUXC_EN_CLK |
IXGBE_TSAUXC_SYNCLK |
IXGBE_TSAUXC_SDP0_INT;
/* clock period (or pulse length) */
clktiml = (u32)(IXGBE_PTP_PPS_HALF_SECOND << shift);
clktimh = (u32)((IXGBE_PTP_PPS_HALF_SECOND << shift) >> 32);
/* Account for the cyclecounter wrap-around value by
* using the converted ns value of the current time to
* check for when the next aligned second would occur.
*/
clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
clock_edge |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
ns = timecounter_cyc2time(&adapter->hw_tc, clock_edge);
div_u64_rem(ns, IXGBE_PTP_PPS_HALF_SECOND, &rem);
clock_edge += ((IXGBE_PTP_PPS_HALF_SECOND - (u64)rem) << shift);
/* specify the initial clock start time */
trgttiml = (u32)clock_edge;
trgttimh = (u32)(clock_edge >> 32);
IXGBE_WRITE_REG(hw, IXGBE_CLKTIML, clktiml);
IXGBE_WRITE_REG(hw, IXGBE_CLKTIMH, clktimh);
IXGBE_WRITE_REG(hw, IXGBE_TRGTTIML0, trgttiml);
IXGBE_WRITE_REG(hw, IXGBE_TRGTTIMH0, trgttimh);
IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC, tsauxc);
IXGBE_WRITE_FLUSH(hw);
}
/**
* ixgbe_ptp_read_X550 - read cycle counter value
* @hw_cc: cyclecounter structure
*
* This function reads SYSTIME registers. It is called by the cyclecounter
* structure to convert from internal representation into nanoseconds. We need
* this for X550 since some skews do not have expected clock frequency and
* result of SYSTIME is 32bits of "billions of cycles" and 32 bits of
* "cycles", rather than seconds and nanoseconds.
*/
static u64 ixgbe_ptp_read_X550(const struct cyclecounter *hw_cc)
{
struct ixgbe_adapter *adapter =
container_of(hw_cc, struct ixgbe_adapter, hw_cc);
struct ixgbe_hw *hw = &adapter->hw;
struct timespec64 ts;
/* storage is 32 bits of 'billions of cycles' and 32 bits of 'cycles'.
* Some revisions of hardware run at a higher frequency and so the
* cycles are not guaranteed to be nanoseconds. The timespec64 created
* here is used for its math/conversions but does not necessarily
* represent nominal time.
*
* It should be noted that this cyclecounter will overflow at a
* non-bitmask field since we have to convert our billions of cycles
* into an actual cycles count. This results in some possible weird
* situations at high cycle counter stamps. However given that 32 bits
* of "seconds" is ~138 years this isn't a problem. Even at the
* increased frequency of some revisions, this is still ~103 years.
* Since the SYSTIME values start at 0 and we never write them, it is
* highly unlikely for the cyclecounter to overflow in practice.
*/
IXGBE_READ_REG(hw, IXGBE_SYSTIMR);
ts.tv_nsec = IXGBE_READ_REG(hw, IXGBE_SYSTIML);
ts.tv_sec = IXGBE_READ_REG(hw, IXGBE_SYSTIMH);
return (u64)timespec64_to_ns(&ts);
}
/**
* ixgbe_ptp_read_82599 - read raw cycle counter (to be used by time counter)
* @cc: the cyclecounter structure
*
* this function reads the cyclecounter registers and is called by the
* cyclecounter structure used to construct a ns counter from the
* arbitrary fixed point registers
*/
static u64 ixgbe_ptp_read_82599(const struct cyclecounter *cc)
{
struct ixgbe_adapter *adapter =
container_of(cc, struct ixgbe_adapter, hw_cc);
struct ixgbe_hw *hw = &adapter->hw;
u64 stamp = 0;
stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIML);
stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32;
return stamp;
}
/**
* ixgbe_ptp_convert_to_hwtstamp - convert register value to hw timestamp
* @adapter: private adapter structure
* @hwtstamp: stack timestamp structure
* @timestamp: unsigned 64bit system time value
*
* We need to convert the adapter's RX/TXSTMP registers into a hwtstamp value
* which can be used by the stack's ptp functions.
*
* The lock is used to protect consistency of the cyclecounter and the SYSTIME
* registers. However, it does not need to protect against the Rx or Tx
* timestamp registers, as there can't be a new timestamp until the old one is
* unlatched by reading.
*
* In addition to the timestamp in hardware, some controllers need a software
* overflow cyclecounter, and this function takes this into account as well.
**/
static void ixgbe_ptp_convert_to_hwtstamp(struct ixgbe_adapter *adapter,
struct skb_shared_hwtstamps *hwtstamp,
u64 timestamp)
{
unsigned long flags;
struct timespec64 systime;
u64 ns;
memset(hwtstamp, 0, sizeof(*hwtstamp));
switch (adapter->hw.mac.type) {
/* X550 and later hardware supposedly represent time using a seconds
* and nanoseconds counter, instead of raw 64bits nanoseconds. We need
* to convert the timestamp into cycles before it can be fed to the
* cyclecounter. We need an actual cyclecounter because some revisions
* of hardware run at a higher frequency and thus the counter does
* not represent seconds/nanoseconds. Instead it can be thought of as
* cycles and billions of cycles.
*/
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_x550em_a:
/* Upper 32 bits represent billions of cycles, lower 32 bits
* represent cycles. However, we use timespec64_to_ns for the
* correct math even though the units haven't been corrected
* yet.
*/
systime.tv_sec = timestamp >> 32;
systime.tv_nsec = timestamp & 0xFFFFFFFF;
timestamp = timespec64_to_ns(&systime);
break;
default:
break;
}
spin_lock_irqsave(&adapter->tmreg_lock, flags);
ns = timecounter_cyc2time(&adapter->hw_tc, timestamp);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
hwtstamp->hwtstamp = ns_to_ktime(ns);
}
/**
* ixgbe_ptp_adjfreq_82599
* @ptp: the ptp clock structure
* @ppb: parts per billion adjustment from base
*
* adjust the frequency of the ptp cycle counter by the
* indicated ppb from the base frequency.
*/
static int ixgbe_ptp_adjfreq_82599(struct ptp_clock_info *ptp, s32 ppb)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
struct ixgbe_hw *hw = &adapter->hw;
u64 freq, incval;
u32 diff;
int neg_adj = 0;
if (ppb < 0) {
neg_adj = 1;
ppb = -ppb;
}
smp_mb();
incval = READ_ONCE(adapter->base_incval);
freq = incval;
freq *= ppb;
diff = div_u64(freq, 1000000000ULL);
incval = neg_adj ? (incval - diff) : (incval + diff);
switch (hw->mac.type) {
case ixgbe_mac_X540:
if (incval > 0xFFFFFFFFULL)
e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, (u32)incval);
break;
case ixgbe_mac_82599EB:
if (incval > 0x00FFFFFFULL)
e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA,
BIT(IXGBE_INCPER_SHIFT_82599) |
((u32)incval & 0x00FFFFFFUL));
break;
default:
break;
}
return 0;
}
/**
* ixgbe_ptp_adjfreq_X550
* @ptp: the ptp clock structure
* @ppb: parts per billion adjustment from base
*
* adjust the frequency of the SYSTIME registers by the indicated ppb from base
* frequency
*/
static int ixgbe_ptp_adjfreq_X550(struct ptp_clock_info *ptp, s32 ppb)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
struct ixgbe_hw *hw = &adapter->hw;
int neg_adj = 0;
u64 rate = IXGBE_X550_BASE_PERIOD;
u32 inca;
if (ppb < 0) {
neg_adj = 1;
ppb = -ppb;
}
rate *= ppb;
rate = div_u64(rate, 1000000000ULL);
/* warn if rate is too large */
if (rate >= INCVALUE_MASK)
e_dev_warn("PTP ppb adjusted SYSTIME rate overflowed!\n");
inca = rate & INCVALUE_MASK;
if (neg_adj)
inca |= ISGN;
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, inca);
return 0;
}
/**
* ixgbe_ptp_adjtime
* @ptp: the ptp clock structure
* @delta: offset to adjust the cycle counter by
*
* adjust the timer by resetting the timecounter structure.
*/
static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
unsigned long flags;
spin_lock_irqsave(&adapter->tmreg_lock, flags);
timecounter_adjtime(&adapter->hw_tc, delta);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
if (adapter->ptp_setup_sdp)
adapter->ptp_setup_sdp(adapter);
return 0;
}
/**
* ixgbe_ptp_gettime
* @ptp: the ptp clock structure
* @ts: timespec structure to hold the current time value
*
* read the timecounter and return the correct value on ns,
* after converting it into a struct timespec.
*/
static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec64 *ts)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
unsigned long flags;
u64 ns;
spin_lock_irqsave(&adapter->tmreg_lock, flags);
ns = timecounter_read(&adapter->hw_tc);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
*ts = ns_to_timespec64(ns);
return 0;
}
/**
* ixgbe_ptp_settime
* @ptp: the ptp clock structure
* @ts: the timespec containing the new time for the cycle counter
*
* reset the timecounter to use a new base value instead of the kernel
* wall timer value.
*/
static int ixgbe_ptp_settime(struct ptp_clock_info *ptp,
const struct timespec64 *ts)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
unsigned long flags;
u64 ns = timespec64_to_ns(ts);
/* reset the timecounter */
spin_lock_irqsave(&adapter->tmreg_lock, flags);
timecounter_init(&adapter->hw_tc, &adapter->hw_cc, ns);
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
if (adapter->ptp_setup_sdp)
adapter->ptp_setup_sdp(adapter);
return 0;
}
/**
* ixgbe_ptp_feature_enable
* @ptp: the ptp clock structure
* @rq: the requested feature to change
* @on: whether to enable or disable the feature
*
* enable (or disable) ancillary features of the phc subsystem.
* our driver only supports the PPS feature on the X540
*/
static int ixgbe_ptp_feature_enable(struct ptp_clock_info *ptp,
struct ptp_clock_request *rq, int on)
{
struct ixgbe_adapter *adapter =
container_of(ptp, struct ixgbe_adapter, ptp_caps);
/**
* When PPS is enabled, unmask the interrupt for the ClockOut
* feature, so that the interrupt handler can send the PPS
* event when the clock SDP triggers. Clear mask when PPS is
* disabled
*/
if (rq->type != PTP_CLK_REQ_PPS || !adapter->ptp_setup_sdp)
return -ENOTSUPP;
if (on)
adapter->flags2 |= IXGBE_FLAG2_PTP_PPS_ENABLED;
else
adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
adapter->ptp_setup_sdp(adapter);
return 0;
}
/**
* ixgbe_ptp_check_pps_event
* @adapter: the private adapter structure
*
* This function is called by the interrupt routine when checking for
* interrupts. It will check and handle a pps event.
*/
void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct ptp_clock_event event;
event.type = PTP_CLOCK_PPS;
/* this check is necessary in case the interrupt was enabled via some
* alternative means (ex. debug_fs). Better to check here than
* everywhere that calls this function.
*/
if (!adapter->ptp_clock)
return;
switch (hw->mac.type) {
case ixgbe_mac_X540:
ptp_clock_event(adapter->ptp_clock, &event);
break;
default:
break;
}
}
/**
* ixgbe_ptp_overflow_check - watchdog task to detect SYSTIME overflow
* @adapter: private adapter struct
*
* this watchdog task periodically reads the timecounter
* in order to prevent missing when the system time registers wrap
* around. This needs to be run approximately twice a minute.
*/
void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter)
{
bool timeout = time_is_before_jiffies(adapter->last_overflow_check +
IXGBE_OVERFLOW_PERIOD);
struct timespec64 ts;
if (timeout) {
ixgbe_ptp_gettime(&adapter->ptp_caps, &ts);
adapter->last_overflow_check = jiffies;
}
}
/**
* ixgbe_ptp_rx_hang - detect error case when Rx timestamp registers latched
* @adapter: private network adapter structure
*
* this watchdog task is scheduled to detect error case where hardware has
* dropped an Rx packet that was timestamped when the ring is full. The
* particular error is rare but leaves the device in a state unable to timestamp
* any future packets.
*/
void ixgbe_ptp_rx_hang(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
struct ixgbe_ring *rx_ring;
unsigned long rx_event;
int n;
/* if we don't have a valid timestamp in the registers, just update the
* timeout counter and exit
*/
if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) {
adapter->last_rx_ptp_check = jiffies;
return;
}
/* determine the most recent watchdog or rx_timestamp event */
rx_event = adapter->last_rx_ptp_check;
for (n = 0; n < adapter->num_rx_queues; n++) {
rx_ring = adapter->rx_ring[n];
if (time_after(rx_ring->last_rx_timestamp, rx_event))
rx_event = rx_ring->last_rx_timestamp;
}
/* only need to read the high RXSTMP register to clear the lock */
if (time_is_before_jiffies(rx_event + 5 * HZ)) {
IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
adapter->last_rx_ptp_check = jiffies;
adapter->rx_hwtstamp_cleared++;
e_warn(drv, "clearing RX Timestamp hang\n");
}
}
/**
* ixgbe_ptp_clear_tx_timestamp - utility function to clear Tx timestamp state
* @adapter: the private adapter structure
*
* This function should be called whenever the state related to a Tx timestamp
* needs to be cleared. This helps ensure that all related bits are reset for
* the next Tx timestamp event.
*/
static void ixgbe_ptp_clear_tx_timestamp(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
if (adapter->ptp_tx_skb) {
dev_kfree_skb_any(adapter->ptp_tx_skb);
adapter->ptp_tx_skb = NULL;
}
clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
}
/**
* ixgbe_ptp_tx_hang - detect error case where Tx timestamp never finishes
* @adapter: private network adapter structure
*/
void ixgbe_ptp_tx_hang(struct ixgbe_adapter *adapter)
{
bool timeout = time_is_before_jiffies(adapter->ptp_tx_start +
IXGBE_PTP_TX_TIMEOUT);
if (!adapter->ptp_tx_skb)
return;
if (!test_bit(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state))
return;
/* If we haven't received a timestamp within the timeout, it is
* reasonable to assume that it will never occur, so we can unlock the
* timestamp bit when this occurs.
*/
if (timeout) {
cancel_work_sync(&adapter->ptp_tx_work);
ixgbe_ptp_clear_tx_timestamp(adapter);
adapter->tx_hwtstamp_timeouts++;
e_warn(drv, "clearing Tx timestamp hang\n");
}
}
/**
* ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp
* @adapter: the private adapter struct
*
* if the timestamp is valid, we convert it into the timecounter ns
* value, then store that result into the shhwtstamps structure which
* is passed up the network stack
*/
static void ixgbe_ptp_tx_hwtstamp(struct ixgbe_adapter *adapter)
{
struct sk_buff *skb = adapter->ptp_tx_skb;
struct ixgbe_hw *hw = &adapter->hw;
struct skb_shared_hwtstamps shhwtstamps;
u64 regval = 0;
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPL);
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_TXSTMPH) << 32;
ixgbe_ptp_convert_to_hwtstamp(adapter, &shhwtstamps, regval);
/* Handle cleanup of the ptp_tx_skb ourselves, and unlock the state
* bit prior to notifying the stack via skb_tstamp_tx(). This prevents
* well behaved applications from attempting to timestamp again prior
* to the lock bit being clear.
*/
adapter->ptp_tx_skb = NULL;
clear_bit_unlock(__IXGBE_PTP_TX_IN_PROGRESS, &adapter->state);
/* Notify the stack and then free the skb after we've unlocked */
skb_tstamp_tx(skb, &shhwtstamps);
dev_kfree_skb_any(skb);
}
/**
* ixgbe_ptp_tx_hwtstamp_work
* @work: pointer to the work struct
*
* This work item polls TSYNCTXCTL valid bit to determine when a Tx hardware
* timestamp has been taken for the current skb. It is necessary, because the
* descriptor's "done" bit does not correlate with the timestamp event.
*/
static void ixgbe_ptp_tx_hwtstamp_work(struct work_struct *work)
{
struct ixgbe_adapter *adapter = container_of(work, struct ixgbe_adapter,
ptp_tx_work);
struct ixgbe_hw *hw = &adapter->hw;
bool timeout = time_is_before_jiffies(adapter->ptp_tx_start +
IXGBE_PTP_TX_TIMEOUT);
u32 tsynctxctl;
/* we have to have a valid skb to poll for a timestamp */
if (!adapter->ptp_tx_skb) {
ixgbe_ptp_clear_tx_timestamp(adapter);
return;
}
/* stop polling once we have a valid timestamp */
tsynctxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
if (tsynctxctl & IXGBE_TSYNCTXCTL_VALID) {
ixgbe_ptp_tx_hwtstamp(adapter);
return;
}
if (timeout) {
ixgbe_ptp_clear_tx_timestamp(adapter);
adapter->tx_hwtstamp_timeouts++;
e_warn(drv, "clearing Tx Timestamp hang\n");
} else {
/* reschedule to keep checking if it's not available yet */
schedule_work(&adapter->ptp_tx_work);
}
}
/**
* ixgbe_ptp_rx_pktstamp - utility function to get RX time stamp from buffer
* @q_vector: structure containing interrupt and ring information
* @skb: the packet
*
* This function will be called by the Rx routine of the timestamp for this
* packet is stored in the buffer. The value is stored in little endian format
* starting at the end of the packet data.
*/
void ixgbe_ptp_rx_pktstamp(struct ixgbe_q_vector *q_vector,
struct sk_buff *skb)
{
__le64 regval;
/* copy the bits out of the skb, and then trim the skb length */
skb_copy_bits(skb, skb->len - IXGBE_TS_HDR_LEN, &regval,
IXGBE_TS_HDR_LEN);
__pskb_trim(skb, skb->len - IXGBE_TS_HDR_LEN);
/* The timestamp is recorded in little endian format, and is stored at
* the end of the packet.
*
* DWORD: N N + 1 N + 2
* Field: End of Packet SYSTIMH SYSTIML
*/
ixgbe_ptp_convert_to_hwtstamp(q_vector->adapter, skb_hwtstamps(skb),
le64_to_cpu(regval));
}
/**
* ixgbe_ptp_rx_rgtstamp - utility function which checks for RX time stamp
* @q_vector: structure containing interrupt and ring information
* @skb: particular skb to send timestamp with
*
* if the timestamp is valid, we convert it into the timecounter ns
* value, then store that result into the shhwtstamps structure which
* is passed up the network stack
*/
void ixgbe_ptp_rx_rgtstamp(struct ixgbe_q_vector *q_vector,
struct sk_buff *skb)
{
struct ixgbe_adapter *adapter;
struct ixgbe_hw *hw;
u64 regval = 0;
u32 tsyncrxctl;
/* we cannot process timestamps on a ring without a q_vector */
if (!q_vector || !q_vector->adapter)
return;
adapter = q_vector->adapter;
hw = &adapter->hw;
/* Read the tsyncrxctl register afterwards in order to prevent taking an
* I/O hit on every packet.
*/
tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID))
return;
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL);
regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32;
ixgbe_ptp_convert_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
}
int ixgbe_ptp_get_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
{
struct hwtstamp_config *config = &adapter->tstamp_config;
return copy_to_user(ifr->ifr_data, config,
sizeof(*config)) ? -EFAULT : 0;
}
/**
* ixgbe_ptp_set_timestamp_mode - setup the hardware for the requested mode
* @adapter: the private ixgbe adapter structure
* @config: the hwtstamp configuration requested
*
* Outgoing time stamping can be enabled and disabled. Play nice and
* disable it when requested, although it shouldn't cause any overhead
* when no packet needs it. At most one packet in the queue may be
* marked for time stamping, otherwise it would be impossible to tell
* for sure to which packet the hardware time stamp belongs.
*
* Incoming time stamping has to be configured via the hardware
* filters. Not all combinations are supported, in particular event
* type has to be specified. Matching the kind of event packet is
* not supported, with the exception of "all V2 events regardless of
* level 2 or 4".
*
* Since hardware always timestamps Path delay packets when timestamping V2
* packets, regardless of the type specified in the register, only use V2
* Event mode. This more accurately tells the user what the hardware is going
* to do anyways.
*
* Note: this may modify the hwtstamp configuration towards a more general
* mode, if required to support the specifically requested mode.
*/
static int ixgbe_ptp_set_timestamp_mode(struct ixgbe_adapter *adapter,
struct hwtstamp_config *config)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 tsync_tx_ctl = IXGBE_TSYNCTXCTL_ENABLED;
u32 tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED;
u32 tsync_rx_mtrl = PTP_EV_PORT << 16;
bool is_l2 = false;
u32 regval;
/* reserved for future extensions */
if (config->flags)
return -EINVAL;
switch (config->tx_type) {
case HWTSTAMP_TX_OFF:
tsync_tx_ctl = 0;
case HWTSTAMP_TX_ON:
break;
default:
return -ERANGE;
}
switch (config->rx_filter) {
case HWTSTAMP_FILTER_NONE:
tsync_rx_ctl = 0;
tsync_rx_mtrl = 0;
adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1;
tsync_rx_mtrl |= IXGBE_RXMTRL_V1_SYNC_MSG;
adapter->flags |= (IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L4_V1;
tsync_rx_mtrl |= IXGBE_RXMTRL_V1_DELAY_REQ_MSG;
adapter->flags |= (IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2;
is_l2 = true;
config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
adapter->flags |= (IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
break;
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_NTP_ALL:
case HWTSTAMP_FILTER_ALL:
/* The X550 controller is capable of timestamping all packets,
* which allows it to accept any filter.
*/
if (hw->mac.type >= ixgbe_mac_X550) {
tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_ALL;
config->rx_filter = HWTSTAMP_FILTER_ALL;
adapter->flags |= IXGBE_FLAG_RX_HWTSTAMP_ENABLED;
break;
}
/* fall through */
default:
/*
* register RXMTRL must be set in order to do V1 packets,
* therefore it is not possible to time stamp both V1 Sync and
* Delay_Req messages and hardware does not support
* timestamping all packets => return error
*/
adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
config->rx_filter = HWTSTAMP_FILTER_NONE;
return -ERANGE;
}
if (hw->mac.type == ixgbe_mac_82598EB) {
adapter->flags &= ~(IXGBE_FLAG_RX_HWTSTAMP_ENABLED |
IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER);
if (tsync_rx_ctl | tsync_tx_ctl)
return -ERANGE;
return 0;
}
/* Per-packet timestamping only works if the filter is set to all
* packets. Since this is desired, always timestamp all packets as long
* as any Rx filter was configured.
*/
switch (hw->mac.type) {
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_x550em_a:
/* enable timestamping all packets only if at least some
* packets were requested. Otherwise, play nice and disable
* timestamping
*/
if (config->rx_filter == HWTSTAMP_FILTER_NONE)
break;
tsync_rx_ctl = IXGBE_TSYNCRXCTL_ENABLED |
IXGBE_TSYNCRXCTL_TYPE_ALL |
IXGBE_TSYNCRXCTL_TSIP_UT_EN;
config->rx_filter = HWTSTAMP_FILTER_ALL;
adapter->flags |= IXGBE_FLAG_RX_HWTSTAMP_ENABLED;
adapter->flags &= ~IXGBE_FLAG_RX_HWTSTAMP_IN_REGISTER;
is_l2 = true;
break;
default:
break;
}
/* define ethertype filter for timestamping L2 packets */
if (is_l2)
IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588),
(IXGBE_ETQF_FILTER_EN | /* enable filter */
IXGBE_ETQF_1588 | /* enable timestamping */
ETH_P_1588)); /* 1588 eth protocol type */
else
IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_1588), 0);
/* enable/disable TX */
regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
regval &= ~IXGBE_TSYNCTXCTL_ENABLED;
regval |= tsync_tx_ctl;
IXGBE_WRITE_REG(hw, IXGBE_TSYNCTXCTL, regval);
/* enable/disable RX */
regval = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
regval &= ~(IXGBE_TSYNCRXCTL_ENABLED | IXGBE_TSYNCRXCTL_TYPE_MASK);
regval |= tsync_rx_ctl;
IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCTL, regval);
/* define which PTP packets are time stamped */
IXGBE_WRITE_REG(hw, IXGBE_RXMTRL, tsync_rx_mtrl);
IXGBE_WRITE_FLUSH(hw);
/* clear TX/RX time stamp registers, just to be sure */
ixgbe_ptp_clear_tx_timestamp(adapter);
IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
return 0;
}
/**
* ixgbe_ptp_set_ts_config - user entry point for timestamp mode
* @adapter: pointer to adapter struct
* @ifr: ioctl data
*
* Set hardware to requested mode. If unsupported, return an error with no
* changes. Otherwise, store the mode for future reference.
*/
int ixgbe_ptp_set_ts_config(struct ixgbe_adapter *adapter, struct ifreq *ifr)
{
struct hwtstamp_config config;
int err;
if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
return -EFAULT;
err = ixgbe_ptp_set_timestamp_mode(adapter, &config);
if (err)
return err;
/* save these settings for future reference */
memcpy(&adapter->tstamp_config, &config,
sizeof(adapter->tstamp_config));
return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
-EFAULT : 0;
}
static void ixgbe_ptp_link_speed_adjust(struct ixgbe_adapter *adapter,
u32 *shift, u32 *incval)
{
/**
* Scale the NIC cycle counter by a large factor so that
* relatively small corrections to the frequency can be added
* or subtracted. The drawbacks of a large factor include
* (a) the clock register overflows more quickly, (b) the cycle
* counter structure must be able to convert the systime value
* to nanoseconds using only a multiplier and a right-shift,
* and (c) the value must fit within the timinca register space
* => math based on internal DMA clock rate and available bits
*
* Note that when there is no link, internal DMA clock is same as when
* link speed is 10Gb. Set the registers correctly even when link is
* down to preserve the clock setting
*/
switch (adapter->link_speed) {
case IXGBE_LINK_SPEED_100_FULL:
*shift = IXGBE_INCVAL_SHIFT_100;
*incval = IXGBE_INCVAL_100;
break;
case IXGBE_LINK_SPEED_1GB_FULL:
*shift = IXGBE_INCVAL_SHIFT_1GB;
*incval = IXGBE_INCVAL_1GB;
break;
case IXGBE_LINK_SPEED_10GB_FULL:
default:
*shift = IXGBE_INCVAL_SHIFT_10GB;
*incval = IXGBE_INCVAL_10GB;
break;
}
}
/**
* ixgbe_ptp_start_cyclecounter - create the cycle counter from hw
* @adapter: pointer to the adapter structure
*
* This function should be called to set the proper values for the TIMINCA
* register and tell the cyclecounter structure what the tick rate of SYSTIME
* is. It does not directly modify SYSTIME registers or the timecounter
* structure. It should be called whenever a new TIMINCA value is necessary,
* such as during initialization or when the link speed changes.
*/
void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
struct cyclecounter cc;
unsigned long flags;
u32 incval = 0;
u32 tsauxc = 0;
u32 fuse0 = 0;
/* For some of the boards below this mask is technically incorrect.
* The timestamp mask overflows at approximately 61bits. However the
* particular hardware does not overflow on an even bitmask value.
* Instead, it overflows due to conversion of upper 32bits billions of
* cycles. Timecounters are not really intended for this purpose so
* they do not properly function if the overflow point isn't 2^N-1.
* However, the actual SYSTIME values in question take ~138 years to
* overflow. In practice this means they won't actually overflow. A
* proper fix to this problem would require modification of the
* timecounter delta calculations.
*/
cc.mask = CLOCKSOURCE_MASK(64);
cc.mult = 1;
cc.shift = 0;
switch (hw->mac.type) {
case ixgbe_mac_X550EM_x:
/* SYSTIME assumes X550EM_x board frequency is 300Mhz, and is
* designed to represent seconds and nanoseconds when this is
* the case. However, some revisions of hardware have a 400Mhz
* clock and we have to compensate for this frequency
* variation using corrected mult and shift values.
*/
fuse0 = IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0));
if (!(fuse0 & IXGBE_FUSES0_300MHZ)) {
cc.mult = 3;
cc.shift = 2;
}
/* fallthrough */
case ixgbe_mac_x550em_a:
case ixgbe_mac_X550:
cc.read = ixgbe_ptp_read_X550;
/* enable SYSTIME counter */
IXGBE_WRITE_REG(hw, IXGBE_SYSTIMR, 0);
IXGBE_WRITE_REG(hw, IXGBE_SYSTIML, 0);
IXGBE_WRITE_REG(hw, IXGBE_SYSTIMH, 0);
tsauxc = IXGBE_READ_REG(hw, IXGBE_TSAUXC);
IXGBE_WRITE_REG(hw, IXGBE_TSAUXC,
tsauxc & ~IXGBE_TSAUXC_DISABLE_SYSTIME);
IXGBE_WRITE_REG(hw, IXGBE_TSIM, IXGBE_TSIM_TXTS);
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_TIMESYNC);
IXGBE_WRITE_FLUSH(hw);
break;
case ixgbe_mac_X540:
cc.read = ixgbe_ptp_read_82599;
ixgbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval);
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA, incval);
break;
case ixgbe_mac_82599EB:
cc.read = ixgbe_ptp_read_82599;
ixgbe_ptp_link_speed_adjust(adapter, &cc.shift, &incval);
incval >>= IXGBE_INCVAL_SHIFT_82599;
cc.shift -= IXGBE_INCVAL_SHIFT_82599;
IXGBE_WRITE_REG(hw, IXGBE_TIMINCA,
BIT(IXGBE_INCPER_SHIFT_82599) | incval);
break;
default:
/* other devices aren't supported */
return;
}
/* update the base incval used to calculate frequency adjustment */
WRITE_ONCE(adapter->base_incval, incval);
smp_mb();
/* need lock to prevent incorrect read while modifying cyclecounter */
spin_lock_irqsave(&adapter->tmreg_lock, flags);
memcpy(&adapter->hw_cc, &cc, sizeof(adapter->hw_cc));
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
}
/**
* ixgbe_ptp_reset
* @adapter: the ixgbe private board structure
*
* When the MAC resets, all the hardware bits for timesync are reset. This
* function is used to re-enable the device for PTP based on current settings.
* We do lose the current clock time, so just reset the cyclecounter to the
* system real clock time.
*
* This function will maintain hwtstamp_config settings, and resets the SDP
* output if it was enabled.
*/
void ixgbe_ptp_reset(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
unsigned long flags;
/* reset the hardware timestamping mode */
ixgbe_ptp_set_timestamp_mode(adapter, &adapter->tstamp_config);
/* 82598 does not support PTP */
if (hw->mac.type == ixgbe_mac_82598EB)
return;
ixgbe_ptp_start_cyclecounter(adapter);
spin_lock_irqsave(&adapter->tmreg_lock, flags);
timecounter_init(&adapter->hw_tc, &adapter->hw_cc,
ktime_to_ns(ktime_get_real()));
spin_unlock_irqrestore(&adapter->tmreg_lock, flags);
adapter->last_overflow_check = jiffies;
/* Now that the shift has been calculated and the systime
* registers reset, (re-)enable the Clock out feature
*/
if (adapter->ptp_setup_sdp)
adapter->ptp_setup_sdp(adapter);
}
/**
* ixgbe_ptp_create_clock
* @adapter: the ixgbe private adapter structure
*
* This function performs setup of the user entry point function table and
* initializes the PTP clock device, which is used to access the clock-like
* features of the PTP core. It will be called by ixgbe_ptp_init, and may
* reuse a previously initialized clock (such as during a suspend/resume
* cycle).
*/
static long ixgbe_ptp_create_clock(struct ixgbe_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
long err;
/* do nothing if we already have a clock device */
if (!IS_ERR_OR_NULL(adapter->ptp_clock))
return 0;
switch (adapter->hw.mac.type) {
case ixgbe_mac_X540:
snprintf(adapter->ptp_caps.name,
sizeof(adapter->ptp_caps.name),
"%s", netdev->name);
adapter->ptp_caps.owner = THIS_MODULE;
adapter->ptp_caps.max_adj = 250000000;
adapter->ptp_caps.n_alarm = 0;
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.n_per_out = 0;
adapter->ptp_caps.pps = 1;
adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_82599;
adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
adapter->ptp_setup_sdp = ixgbe_ptp_setup_sdp_x540;
break;
case ixgbe_mac_82599EB:
snprintf(adapter->ptp_caps.name,
sizeof(adapter->ptp_caps.name),
"%s", netdev->name);
adapter->ptp_caps.owner = THIS_MODULE;
adapter->ptp_caps.max_adj = 250000000;
adapter->ptp_caps.n_alarm = 0;
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.n_per_out = 0;
adapter->ptp_caps.pps = 0;
adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_82599;
adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
break;
case ixgbe_mac_X550:
case ixgbe_mac_X550EM_x:
case ixgbe_mac_x550em_a:
snprintf(adapter->ptp_caps.name, 16, "%s", netdev->name);
adapter->ptp_caps.owner = THIS_MODULE;
adapter->ptp_caps.max_adj = 30000000;
adapter->ptp_caps.n_alarm = 0;
adapter->ptp_caps.n_ext_ts = 0;
adapter->ptp_caps.n_per_out = 0;
adapter->ptp_caps.pps = 0;
adapter->ptp_caps.adjfreq = ixgbe_ptp_adjfreq_X550;
adapter->ptp_caps.adjtime = ixgbe_ptp_adjtime;
adapter->ptp_caps.gettime64 = ixgbe_ptp_gettime;
adapter->ptp_caps.settime64 = ixgbe_ptp_settime;
adapter->ptp_caps.enable = ixgbe_ptp_feature_enable;
adapter->ptp_setup_sdp = NULL;
break;
default:
adapter->ptp_clock = NULL;
adapter->ptp_setup_sdp = NULL;
return -EOPNOTSUPP;
}
adapter->ptp_clock = ptp_clock_register(&adapter->ptp_caps,
&adapter->pdev->dev);
if (IS_ERR(adapter->ptp_clock)) {
err = PTR_ERR(adapter->ptp_clock);
adapter->ptp_clock = NULL;
e_dev_err("ptp_clock_register failed\n");
return err;
} else if (adapter->ptp_clock)
e_dev_info("registered PHC device on %s\n", netdev->name);
/* set default timestamp mode to disabled here. We do this in
* create_clock instead of init, because we don't want to override the
* previous settings during a resume cycle.
*/
adapter->tstamp_config.rx_filter = HWTSTAMP_FILTER_NONE;
adapter->tstamp_config.tx_type = HWTSTAMP_TX_OFF;
return 0;
}
/**
* ixgbe_ptp_init
* @adapter: the ixgbe private adapter structure
*
* This function performs the required steps for enabling PTP
* support. If PTP support has already been loaded it simply calls the
* cyclecounter init routine and exits.
*/
void ixgbe_ptp_init(struct ixgbe_adapter *adapter)
{
/* initialize the spin lock first since we can't control when a user
* will call the entry functions once we have initialized the clock
* device
*/
spin_lock_init(&adapter->tmreg_lock);
/* obtain a PTP device, or re-use an existing device */
if (ixgbe_ptp_create_clock(adapter))
return;
/* we have a clock so we can initialize work now */
INIT_WORK(&adapter->ptp_tx_work, ixgbe_ptp_tx_hwtstamp_work);
/* reset the PTP related hardware bits */
ixgbe_ptp_reset(adapter);
/* enter the IXGBE_PTP_RUNNING state */
set_bit(__IXGBE_PTP_RUNNING, &adapter->state);
return;
}
/**
* ixgbe_ptp_suspend - stop PTP work items
* @adapter: pointer to adapter struct
*
* this function suspends PTP activity, and prevents more PTP work from being
* generated, but does not destroy the PTP clock device.
*/
void ixgbe_ptp_suspend(struct ixgbe_adapter *adapter)
{
/* Leave the IXGBE_PTP_RUNNING state. */
if (!test_and_clear_bit(__IXGBE_PTP_RUNNING, &adapter->state))
return;
adapter->flags2 &= ~IXGBE_FLAG2_PTP_PPS_ENABLED;
if (adapter->ptp_setup_sdp)
adapter->ptp_setup_sdp(adapter);
/* ensure that we cancel any pending PTP Tx work item in progress */
cancel_work_sync(&adapter->ptp_tx_work);
ixgbe_ptp_clear_tx_timestamp(adapter);
}
/**
* ixgbe_ptp_stop - close the PTP device
* @adapter: pointer to adapter struct
*
* completely destroy the PTP device, should only be called when the device is
* being fully closed.
*/
void ixgbe_ptp_stop(struct ixgbe_adapter *adapter)
{
/* first, suspend PTP activity */
ixgbe_ptp_suspend(adapter);
/* disable the PTP clock device */
if (adapter->ptp_clock) {
ptp_clock_unregister(adapter->ptp_clock);
adapter->ptp_clock = NULL;
e_dev_info("removed PHC on %s\n",
adapter->netdev->name);
}
}