blob: bbf2b265a06a649f1e19157861bc375ca7c4c705 [file] [log] [blame]
/******************************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <linuxwifi@intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved.
* Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH
* Copyright(c) 2016 - 2017 Intel Deutschland GmbH
* Copyright(c) 2018 Intel Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
#ifndef __iwl_fw_file_h__
#define __iwl_fw_file_h__
#include <linux/netdevice.h>
#include <linux/nl80211.h>
/* v1/v2 uCode file layout */
struct iwl_ucode_header {
__le32 ver; /* major/minor/API/serial */
union {
struct {
__le32 inst_size; /* bytes of runtime code */
__le32 data_size; /* bytes of runtime data */
__le32 init_size; /* bytes of init code */
__le32 init_data_size; /* bytes of init data */
__le32 boot_size; /* bytes of bootstrap code */
u8 data[0]; /* in same order as sizes */
} v1;
struct {
__le32 build; /* build number */
__le32 inst_size; /* bytes of runtime code */
__le32 data_size; /* bytes of runtime data */
__le32 init_size; /* bytes of init code */
__le32 init_data_size; /* bytes of init data */
__le32 boot_size; /* bytes of bootstrap code */
u8 data[0]; /* in same order as sizes */
} v2;
} u;
};
/*
* new TLV uCode file layout
*
* The new TLV file format contains TLVs, that each specify
* some piece of data.
*/
enum iwl_ucode_tlv_type {
IWL_UCODE_TLV_INVALID = 0, /* unused */
IWL_UCODE_TLV_INST = 1,
IWL_UCODE_TLV_DATA = 2,
IWL_UCODE_TLV_INIT = 3,
IWL_UCODE_TLV_INIT_DATA = 4,
IWL_UCODE_TLV_BOOT = 5,
IWL_UCODE_TLV_PROBE_MAX_LEN = 6, /* a u32 value */
IWL_UCODE_TLV_PAN = 7,
IWL_UCODE_TLV_RUNT_EVTLOG_PTR = 8,
IWL_UCODE_TLV_RUNT_EVTLOG_SIZE = 9,
IWL_UCODE_TLV_RUNT_ERRLOG_PTR = 10,
IWL_UCODE_TLV_INIT_EVTLOG_PTR = 11,
IWL_UCODE_TLV_INIT_EVTLOG_SIZE = 12,
IWL_UCODE_TLV_INIT_ERRLOG_PTR = 13,
IWL_UCODE_TLV_ENHANCE_SENS_TBL = 14,
IWL_UCODE_TLV_PHY_CALIBRATION_SIZE = 15,
IWL_UCODE_TLV_WOWLAN_INST = 16,
IWL_UCODE_TLV_WOWLAN_DATA = 17,
IWL_UCODE_TLV_FLAGS = 18,
IWL_UCODE_TLV_SEC_RT = 19,
IWL_UCODE_TLV_SEC_INIT = 20,
IWL_UCODE_TLV_SEC_WOWLAN = 21,
IWL_UCODE_TLV_DEF_CALIB = 22,
IWL_UCODE_TLV_PHY_SKU = 23,
IWL_UCODE_TLV_SECURE_SEC_RT = 24,
IWL_UCODE_TLV_SECURE_SEC_INIT = 25,
IWL_UCODE_TLV_SECURE_SEC_WOWLAN = 26,
IWL_UCODE_TLV_NUM_OF_CPU = 27,
IWL_UCODE_TLV_CSCHEME = 28,
IWL_UCODE_TLV_API_CHANGES_SET = 29,
IWL_UCODE_TLV_ENABLED_CAPABILITIES = 30,
IWL_UCODE_TLV_N_SCAN_CHANNELS = 31,
IWL_UCODE_TLV_PAGING = 32,
IWL_UCODE_TLV_SEC_RT_USNIFFER = 34,
/* 35 is unused */
IWL_UCODE_TLV_FW_VERSION = 36,
IWL_UCODE_TLV_FW_DBG_DEST = 38,
IWL_UCODE_TLV_FW_DBG_CONF = 39,
IWL_UCODE_TLV_FW_DBG_TRIGGER = 40,
IWL_UCODE_TLV_FW_GSCAN_CAPA = 50,
IWL_UCODE_TLV_FW_MEM_SEG = 51,
IWL_UCODE_TLV_IML = 52,
/* TLVs 0x1000-0x2000 are for internal driver usage */
IWL_UCODE_TLV_FW_DBG_DUMP_LST = 0x1000,
};
struct iwl_ucode_tlv {
__le32 type; /* see above */
__le32 length; /* not including type/length fields */
u8 data[0];
};
#define IWL_TLV_UCODE_MAGIC 0x0a4c5749
#define FW_VER_HUMAN_READABLE_SZ 64
struct iwl_tlv_ucode_header {
/*
* The TLV style ucode header is distinguished from
* the v1/v2 style header by first four bytes being
* zero, as such is an invalid combination of
* major/minor/API/serial versions.
*/
__le32 zero;
__le32 magic;
u8 human_readable[FW_VER_HUMAN_READABLE_SZ];
/* major/minor/API/serial or major in new format */
__le32 ver;
__le32 build;
__le64 ignore;
/*
* The data contained herein has a TLV layout,
* see above for the TLV header and types.
* Note that each TLV is padded to a length
* that is a multiple of 4 for alignment.
*/
u8 data[0];
};
/*
* ucode TLVs
*
* ability to get extension for: flags & capabilities from ucode binaries files
*/
struct iwl_ucode_api {
__le32 api_index;
__le32 api_flags;
} __packed;
struct iwl_ucode_capa {
__le32 api_index;
__le32 api_capa;
} __packed;
/**
* enum iwl_ucode_tlv_flag - ucode API flags
* @IWL_UCODE_TLV_FLAGS_PAN: This is PAN capable microcode; this previously
* was a separate TLV but moved here to save space.
* @IWL_UCODE_TLV_FLAGS_NEWSCAN: new uCode scan behavior on hidden SSID,
* treats good CRC threshold as a boolean
* @IWL_UCODE_TLV_FLAGS_MFP: This uCode image supports MFP (802.11w).
* @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: This uCode image supports uAPSD
* @IWL_UCODE_TLV_FLAGS_SHORT_BL: 16 entries of black list instead of 64 in scan
* offload profile config command.
* @IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS: D3 image supports up to six
* (rather than two) IPv6 addresses
* @IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID: not sending a probe with the SSID element
* from the probe request template.
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL: new NS offload (small version)
* @IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE: new NS offload (large version)
* @IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT: General support for uAPSD
* @IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD: P2P client supports uAPSD power save
* @IWL_UCODE_TLV_FLAGS_BCAST_FILTERING: uCode supports broadcast filtering.
* @IWL_UCODE_TLV_FLAGS_EBS_SUPPORT: this uCode image supports EBS.
*/
enum iwl_ucode_tlv_flag {
IWL_UCODE_TLV_FLAGS_PAN = BIT(0),
IWL_UCODE_TLV_FLAGS_NEWSCAN = BIT(1),
IWL_UCODE_TLV_FLAGS_MFP = BIT(2),
IWL_UCODE_TLV_FLAGS_SHORT_BL = BIT(7),
IWL_UCODE_TLV_FLAGS_D3_6_IPV6_ADDRS = BIT(10),
IWL_UCODE_TLV_FLAGS_NO_BASIC_SSID = BIT(12),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_SMALL = BIT(15),
IWL_UCODE_TLV_FLAGS_NEW_NSOFFL_LARGE = BIT(16),
IWL_UCODE_TLV_FLAGS_UAPSD_SUPPORT = BIT(24),
IWL_UCODE_TLV_FLAGS_EBS_SUPPORT = BIT(25),
IWL_UCODE_TLV_FLAGS_P2P_PS_UAPSD = BIT(26),
IWL_UCODE_TLV_FLAGS_BCAST_FILTERING = BIT(29),
};
typedef unsigned int __bitwise iwl_ucode_tlv_api_t;
/**
* enum iwl_ucode_tlv_api - ucode api
* @IWL_UCODE_TLV_API_FRAGMENTED_SCAN: This ucode supports active dwell time
* longer than the passive one, which is essential for fragmented scan.
* @IWL_UCODE_TLV_API_WIFI_MCC_UPDATE: ucode supports MCC updates with source.
* @IWL_UCODE_TLV_API_LQ_SS_PARAMS: Configure STBC/BFER via LQ CMD ss_params
* @IWL_UCODE_TLV_API_NEW_VERSION: new versioning format
* @IWL_UCODE_TLV_API_SCAN_TSF_REPORT: Scan start time reported in scan
* iteration complete notification, and the timestamp reported for RX
* received during scan, are reported in TSF of the mac specified in the
* scan request.
* @IWL_UCODE_TLV_API_TKIP_MIC_KEYS: This ucode supports version 2 of
* ADD_MODIFY_STA_KEY_API_S_VER_2.
* @IWL_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement.
* @IWL_UCODE_TLV_API_NAN2_VER2: This ucode supports NAN API version 2
* @IWL_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used
* @IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY: Quota command includes a field
* indicating low latency direction.
* @IWL_UCODE_TLV_API_DEPRECATE_TTAK: RX status flag TTAK ok (bit 7) is
* deprecated.
* @IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2: This ucode supports version 8
* of scan request: SCAN_REQUEST_CMD_UMAC_API_S_VER_8
*
* @NUM_IWL_UCODE_TLV_API: number of bits used
*/
enum iwl_ucode_tlv_api {
/* API Set 0 */
IWL_UCODE_TLV_API_FRAGMENTED_SCAN = (__force iwl_ucode_tlv_api_t)8,
IWL_UCODE_TLV_API_WIFI_MCC_UPDATE = (__force iwl_ucode_tlv_api_t)9,
IWL_UCODE_TLV_API_LQ_SS_PARAMS = (__force iwl_ucode_tlv_api_t)18,
IWL_UCODE_TLV_API_NEW_VERSION = (__force iwl_ucode_tlv_api_t)20,
IWL_UCODE_TLV_API_SCAN_TSF_REPORT = (__force iwl_ucode_tlv_api_t)28,
IWL_UCODE_TLV_API_TKIP_MIC_KEYS = (__force iwl_ucode_tlv_api_t)29,
IWL_UCODE_TLV_API_STA_TYPE = (__force iwl_ucode_tlv_api_t)30,
IWL_UCODE_TLV_API_NAN2_VER2 = (__force iwl_ucode_tlv_api_t)31,
/* API Set 1 */
IWL_UCODE_TLV_API_ADAPTIVE_DWELL = (__force iwl_ucode_tlv_api_t)32,
IWL_UCODE_TLV_API_OCE = (__force iwl_ucode_tlv_api_t)33,
IWL_UCODE_TLV_API_NEW_BEACON_TEMPLATE = (__force iwl_ucode_tlv_api_t)34,
IWL_UCODE_TLV_API_NEW_RX_STATS = (__force iwl_ucode_tlv_api_t)35,
IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY = (__force iwl_ucode_tlv_api_t)38,
IWL_UCODE_TLV_API_DEPRECATE_TTAK = (__force iwl_ucode_tlv_api_t)41,
IWL_UCODE_TLV_API_ADAPTIVE_DWELL_V2 = (__force iwl_ucode_tlv_api_t)42,
NUM_IWL_UCODE_TLV_API
#ifdef __CHECKER__
/* sparse says it cannot increment the previous enum member */
= 128
#endif
};
typedef unsigned int __bitwise iwl_ucode_tlv_capa_t;
/**
* enum iwl_ucode_tlv_capa - ucode capabilities
* @IWL_UCODE_TLV_CAPA_D0I3_SUPPORT: supports D0i3
* @IWL_UCODE_TLV_CAPA_LAR_SUPPORT: supports Location Aware Regulatory
* @IWL_UCODE_TLV_CAPA_UMAC_SCAN: supports UMAC scan.
* @IWL_UCODE_TLV_CAPA_BEAMFORMER: supports Beamformer
* @IWL_UCODE_TLV_CAPA_TOF_SUPPORT: supports Time of Flight (802.11mc FTM)
* @IWL_UCODE_TLV_CAPA_TDLS_SUPPORT: support basic TDLS functionality
* @IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT: supports insertion of current
* tx power value into TPC Report action frame and Link Measurement Report
* action frame
* @IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT: supports updating current
* channel in DS parameter set element in probe requests.
* @IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT: supports adding TPC Report IE in
* probe requests.
* @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
* @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
* which also implies support for the scheduler configuration command
* @IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH: supports TDLS channel switching
* @IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG: Consolidated D3-D0 image
* @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
* @IWL_UCODE_TLV_CAPA_DC2DC_SUPPORT: supports DC2DC Command
* @IWL_UCODE_TLV_CAPA_CSUM_SUPPORT: supports TCP Checksum Offload
* @IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS: support radio and beacon statistics
* @IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD: supports U-APSD on p2p interface when it
* is standalone or with a BSS station interface in the same binding.
* @IWL_UCODE_TLV_CAPA_BT_COEX_PLCR: enabled BT Coex packet level co-running
* @IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC: ucode supports LAR updates with different
* sources for the MCC. This TLV bit is a future replacement to
* IWL_UCODE_TLV_API_WIFI_MCC_UPDATE. When either is set, multi-source LAR
* is supported.
* @IWL_UCODE_TLV_CAPA_BT_COEX_RRC: supports BT Coex RRC
* @IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT: supports gscan (no longer used)
* @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification
* @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm
* @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related
* @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement
* @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts
* @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT
* @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA
* countdown offloading. Beacon notifications are not sent to the host.
* The fw also offloads TBTT alignment.
* @IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION: firmware will decide on what
* antenna the beacon should be transmitted
* @IWL_UCODE_TLV_CAPA_BEACON_STORING: firmware will store the latest beacon
* from AP and will send it upon d0i3 exit.
* @IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2: support LAR API V2
* @IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW: firmware responsible for CT-kill
* @IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT: supports temperature
* thresholds reporting
* @IWL_UCODE_TLV_CAPA_CTDP_SUPPORT: supports cTDP command
* @IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED: supports usniffer enabled in
* regular image.
* @IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG: support getting more shared
* memory addresses from the firmware.
* @IWL_UCODE_TLV_CAPA_LQM_SUPPORT: supports Link Quality Measurement
* @IWL_UCODE_TLV_CAPA_TX_POWER_ACK: reduced TX power API has larger
* command size (command version 4) that supports toggling ACK TX
* power reduction.
* @IWL_UCODE_TLV_CAPA_MLME_OFFLOAD: supports MLME offload
*
* @NUM_IWL_UCODE_TLV_CAPA: number of bits used
*/
enum iwl_ucode_tlv_capa {
IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = (__force iwl_ucode_tlv_capa_t)0,
IWL_UCODE_TLV_CAPA_LAR_SUPPORT = (__force iwl_ucode_tlv_capa_t)1,
IWL_UCODE_TLV_CAPA_UMAC_SCAN = (__force iwl_ucode_tlv_capa_t)2,
IWL_UCODE_TLV_CAPA_BEAMFORMER = (__force iwl_ucode_tlv_capa_t)3,
IWL_UCODE_TLV_CAPA_TOF_SUPPORT = (__force iwl_ucode_tlv_capa_t)5,
IWL_UCODE_TLV_CAPA_TDLS_SUPPORT = (__force iwl_ucode_tlv_capa_t)6,
IWL_UCODE_TLV_CAPA_TXPOWER_INSERTION_SUPPORT = (__force iwl_ucode_tlv_capa_t)8,
IWL_UCODE_TLV_CAPA_DS_PARAM_SET_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)9,
IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = (__force iwl_ucode_tlv_capa_t)10,
IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = (__force iwl_ucode_tlv_capa_t)11,
IWL_UCODE_TLV_CAPA_DQA_SUPPORT = (__force iwl_ucode_tlv_capa_t)12,
IWL_UCODE_TLV_CAPA_TDLS_CHANNEL_SWITCH = (__force iwl_ucode_tlv_capa_t)13,
IWL_UCODE_TLV_CAPA_CNSLDTD_D3_D0_IMG = (__force iwl_ucode_tlv_capa_t)17,
IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = (__force iwl_ucode_tlv_capa_t)18,
IWL_UCODE_TLV_CAPA_DC2DC_CONFIG_SUPPORT = (__force iwl_ucode_tlv_capa_t)19,
IWL_UCODE_TLV_CAPA_CSUM_SUPPORT = (__force iwl_ucode_tlv_capa_t)21,
IWL_UCODE_TLV_CAPA_RADIO_BEACON_STATS = (__force iwl_ucode_tlv_capa_t)22,
IWL_UCODE_TLV_CAPA_P2P_SCM_UAPSD = (__force iwl_ucode_tlv_capa_t)26,
IWL_UCODE_TLV_CAPA_BT_COEX_PLCR = (__force iwl_ucode_tlv_capa_t)28,
IWL_UCODE_TLV_CAPA_LAR_MULTI_MCC = (__force iwl_ucode_tlv_capa_t)29,
IWL_UCODE_TLV_CAPA_BT_COEX_RRC = (__force iwl_ucode_tlv_capa_t)30,
IWL_UCODE_TLV_CAPA_GSCAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)31,
IWL_UCODE_TLV_CAPA_STA_PM_NOTIF = (__force iwl_ucode_tlv_capa_t)38,
IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT = (__force iwl_ucode_tlv_capa_t)39,
IWL_UCODE_TLV_CAPA_CDB_SUPPORT = (__force iwl_ucode_tlv_capa_t)40,
IWL_UCODE_TLV_CAPA_D0I3_END_FIRST = (__force iwl_ucode_tlv_capa_t)41,
IWL_UCODE_TLV_CAPA_TLC_OFFLOAD = (__force iwl_ucode_tlv_capa_t)43,
IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA = (__force iwl_ucode_tlv_capa_t)44,
IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE = (__force iwl_ucode_tlv_capa_t)64,
IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS = (__force iwl_ucode_tlv_capa_t)65,
IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT = (__force iwl_ucode_tlv_capa_t)67,
IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT = (__force iwl_ucode_tlv_capa_t)68,
IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD = (__force iwl_ucode_tlv_capa_t)70,
IWL_UCODE_TLV_CAPA_BEACON_ANT_SELECTION = (__force iwl_ucode_tlv_capa_t)71,
IWL_UCODE_TLV_CAPA_BEACON_STORING = (__force iwl_ucode_tlv_capa_t)72,
IWL_UCODE_TLV_CAPA_LAR_SUPPORT_V2 = (__force iwl_ucode_tlv_capa_t)73,
IWL_UCODE_TLV_CAPA_CT_KILL_BY_FW = (__force iwl_ucode_tlv_capa_t)74,
IWL_UCODE_TLV_CAPA_TEMP_THS_REPORT_SUPPORT = (__force iwl_ucode_tlv_capa_t)75,
IWL_UCODE_TLV_CAPA_CTDP_SUPPORT = (__force iwl_ucode_tlv_capa_t)76,
IWL_UCODE_TLV_CAPA_USNIFFER_UNIFIED = (__force iwl_ucode_tlv_capa_t)77,
IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG = (__force iwl_ucode_tlv_capa_t)80,
IWL_UCODE_TLV_CAPA_LQM_SUPPORT = (__force iwl_ucode_tlv_capa_t)81,
IWL_UCODE_TLV_CAPA_TX_POWER_ACK = (__force iwl_ucode_tlv_capa_t)84,
IWL_UCODE_TLV_CAPA_LED_CMD_SUPPORT = (__force iwl_ucode_tlv_capa_t)86,
IWL_UCODE_TLV_CAPA_MLME_OFFLOAD = (__force iwl_ucode_tlv_capa_t)96,
NUM_IWL_UCODE_TLV_CAPA
#ifdef __CHECKER__
/* sparse says it cannot increment the previous enum member */
= 128
#endif
};
/* The default calibrate table size if not specified by firmware file */
#define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE 18
#define IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE 19
#define IWL_MAX_PHY_CALIBRATE_TBL_SIZE 253
/* The default max probe length if not specified by the firmware file */
#define IWL_DEFAULT_MAX_PROBE_LENGTH 200
/*
* For 16.0 uCode and above, there is no differentiation between sections,
* just an offset to the HW address.
*/
#define CPU1_CPU2_SEPARATOR_SECTION 0xFFFFCCCC
#define PAGING_SEPARATOR_SECTION 0xAAAABBBB
/* uCode version contains 4 values: Major/Minor/API/Serial */
#define IWL_UCODE_MAJOR(ver) (((ver) & 0xFF000000) >> 24)
#define IWL_UCODE_MINOR(ver) (((ver) & 0x00FF0000) >> 16)
#define IWL_UCODE_API(ver) (((ver) & 0x0000FF00) >> 8)
#define IWL_UCODE_SERIAL(ver) ((ver) & 0x000000FF)
/**
* struct iwl_tlv_calib_ctrl - Calibration control struct.
* Sent as part of the phy configuration command.
* @flow_trigger: bitmap for which calibrations to perform according to
* flow triggers.
* @event_trigger: bitmap for which calibrations to perform according to
* event triggers.
*/
struct iwl_tlv_calib_ctrl {
__le32 flow_trigger;
__le32 event_trigger;
} __packed;
enum iwl_fw_phy_cfg {
FW_PHY_CFG_RADIO_TYPE_POS = 0,
FW_PHY_CFG_RADIO_TYPE = 0x3 << FW_PHY_CFG_RADIO_TYPE_POS,
FW_PHY_CFG_RADIO_STEP_POS = 2,
FW_PHY_CFG_RADIO_STEP = 0x3 << FW_PHY_CFG_RADIO_STEP_POS,
FW_PHY_CFG_RADIO_DASH_POS = 4,
FW_PHY_CFG_RADIO_DASH = 0x3 << FW_PHY_CFG_RADIO_DASH_POS,
FW_PHY_CFG_TX_CHAIN_POS = 16,
FW_PHY_CFG_TX_CHAIN = 0xf << FW_PHY_CFG_TX_CHAIN_POS,
FW_PHY_CFG_RX_CHAIN_POS = 20,
FW_PHY_CFG_RX_CHAIN = 0xf << FW_PHY_CFG_RX_CHAIN_POS,
FW_PHY_CFG_SHARED_CLK = BIT(31),
};
#define IWL_UCODE_MAX_CS 1
/**
* struct iwl_fw_cipher_scheme - a cipher scheme supported by FW.
* @cipher: a cipher suite selector
* @flags: cipher scheme flags (currently reserved for a future use)
* @hdr_len: a size of MPDU security header
* @pn_len: a size of PN
* @pn_off: an offset of pn from the beginning of the security header
* @key_idx_off: an offset of key index byte in the security header
* @key_idx_mask: a bit mask of key_idx bits
* @key_idx_shift: bit shift needed to get key_idx
* @mic_len: mic length in bytes
* @hw_cipher: a HW cipher index used in host commands
*/
struct iwl_fw_cipher_scheme {
__le32 cipher;
u8 flags;
u8 hdr_len;
u8 pn_len;
u8 pn_off;
u8 key_idx_off;
u8 key_idx_mask;
u8 key_idx_shift;
u8 mic_len;
u8 hw_cipher;
} __packed;
enum iwl_fw_dbg_reg_operator {
CSR_ASSIGN,
CSR_SETBIT,
CSR_CLEARBIT,
PRPH_ASSIGN,
PRPH_SETBIT,
PRPH_CLEARBIT,
INDIRECT_ASSIGN,
INDIRECT_SETBIT,
INDIRECT_CLEARBIT,
PRPH_BLOCKBIT,
};
/**
* struct iwl_fw_dbg_reg_op - an operation on a register
*
* @op: &enum iwl_fw_dbg_reg_operator
* @addr: offset of the register
* @val: value
*/
struct iwl_fw_dbg_reg_op {
u8 op;
u8 reserved[3];
__le32 addr;
__le32 val;
} __packed;
/**
* enum iwl_fw_dbg_monitor_mode - available monitor recording modes
*
* @SMEM_MODE: monitor stores the data in SMEM
* @EXTERNAL_MODE: monitor stores the data in allocated DRAM
* @MARBH_MODE: monitor stores the data in MARBH buffer
* @MIPI_MODE: monitor outputs the data through the MIPI interface
*/
enum iwl_fw_dbg_monitor_mode {
SMEM_MODE = 0,
EXTERNAL_MODE = 1,
MARBH_MODE = 2,
MIPI_MODE = 3,
};
/**
* enum iwl_fw_mem_seg_type - memory segment type
* @FW_DBG_MEM_TYPE_MASK: mask for the type indication
* @FW_DBG_MEM_TYPE_REGULAR: regular memory
* @FW_DBG_MEM_TYPE_PRPH: periphery memory (requires special reading)
*/
enum iwl_fw_mem_seg_type {
FW_DBG_MEM_TYPE_MASK = 0xff000000,
FW_DBG_MEM_TYPE_REGULAR = 0x00000000,
FW_DBG_MEM_TYPE_PRPH = 0x01000000,
};
/**
* struct iwl_fw_dbg_mem_seg_tlv - configures the debug data memory segments
*
* @data_type: the memory segment type to record, see &enum iwl_fw_mem_seg_type
* for what we care about
* @ofs: the memory segment offset
* @len: the memory segment length, in bytes
*
* This parses IWL_UCODE_TLV_FW_MEM_SEG
*/
struct iwl_fw_dbg_mem_seg_tlv {
__le32 data_type;
__le32 ofs;
__le32 len;
} __packed;
/**
* struct iwl_fw_dbg_dest_tlv_v1 - configures the destination of the debug data
*
* @version: version of the TLV - currently 0
* @monitor_mode: &enum iwl_fw_dbg_monitor_mode
* @size_power: buffer size will be 2^(size_power + 11)
* @base_reg: addr of the base addr register (PRPH)
* @end_reg: addr of the end addr register (PRPH)
* @write_ptr_reg: the addr of the reg of the write pointer
* @wrap_count: the addr of the reg of the wrap_count
* @base_shift: shift right of the base addr reg
* @end_shift: shift right of the end addr reg
* @reg_ops: array of registers operations
*
* This parses IWL_UCODE_TLV_FW_DBG_DEST
*/
struct iwl_fw_dbg_dest_tlv_v1 {
u8 version;
u8 monitor_mode;
u8 size_power;
u8 reserved;
__le32 base_reg;
__le32 end_reg;
__le32 write_ptr_reg;
__le32 wrap_count;
u8 base_shift;
u8 end_shift;
struct iwl_fw_dbg_reg_op reg_ops[0];
} __packed;
/* Mask of the register for defining the LDBG MAC2SMEM buffer SMEM size */
#define IWL_LDBG_M2S_BUF_SIZE_MSK 0x0fff0000
/* Mask of the register for defining the LDBG MAC2SMEM SMEM base address */
#define IWL_LDBG_M2S_BUF_BA_MSK 0x00000fff
/* The smem buffer chunks are in units of 256 bits */
#define IWL_M2S_UNIT_SIZE 0x100
struct iwl_fw_dbg_dest_tlv {
u8 version;
u8 monitor_mode;
u8 size_power;
u8 reserved;
__le32 cfg_reg;
__le32 write_ptr_reg;
__le32 wrap_count;
u8 base_shift;
u8 size_shift;
struct iwl_fw_dbg_reg_op reg_ops[0];
} __packed;
struct iwl_fw_dbg_conf_hcmd {
u8 id;
u8 reserved;
__le16 len;
u8 data[0];
} __packed;
/**
* enum iwl_fw_dbg_trigger_mode - triggers functionalities
*
* @IWL_FW_DBG_TRIGGER_START: when trigger occurs re-conf the dbg mechanism
* @IWL_FW_DBG_TRIGGER_STOP: when trigger occurs pull the dbg data
* @IWL_FW_DBG_TRIGGER_MONITOR_ONLY: when trigger occurs trigger is set to
* collect only monitor data
*/
enum iwl_fw_dbg_trigger_mode {
IWL_FW_DBG_TRIGGER_START = BIT(0),
IWL_FW_DBG_TRIGGER_STOP = BIT(1),
IWL_FW_DBG_TRIGGER_MONITOR_ONLY = BIT(2),
};
/**
* enum iwl_fw_dbg_trigger_flags - the flags supported by wrt triggers
* @IWL_FW_DBG_FORCE_RESTART: force a firmware restart
*/
enum iwl_fw_dbg_trigger_flags {
IWL_FW_DBG_FORCE_RESTART = BIT(0),
};
/**
* enum iwl_fw_dbg_trigger_vif_type - define the VIF type for a trigger
* @IWL_FW_DBG_CONF_VIF_ANY: any vif type
* @IWL_FW_DBG_CONF_VIF_IBSS: IBSS mode
* @IWL_FW_DBG_CONF_VIF_STATION: BSS mode
* @IWL_FW_DBG_CONF_VIF_AP: AP mode
* @IWL_FW_DBG_CONF_VIF_P2P_CLIENT: P2P Client mode
* @IWL_FW_DBG_CONF_VIF_P2P_GO: P2P GO mode
* @IWL_FW_DBG_CONF_VIF_P2P_DEVICE: P2P device
*/
enum iwl_fw_dbg_trigger_vif_type {
IWL_FW_DBG_CONF_VIF_ANY = NL80211_IFTYPE_UNSPECIFIED,
IWL_FW_DBG_CONF_VIF_IBSS = NL80211_IFTYPE_ADHOC,
IWL_FW_DBG_CONF_VIF_STATION = NL80211_IFTYPE_STATION,
IWL_FW_DBG_CONF_VIF_AP = NL80211_IFTYPE_AP,
IWL_FW_DBG_CONF_VIF_P2P_CLIENT = NL80211_IFTYPE_P2P_CLIENT,
IWL_FW_DBG_CONF_VIF_P2P_GO = NL80211_IFTYPE_P2P_GO,
IWL_FW_DBG_CONF_VIF_P2P_DEVICE = NL80211_IFTYPE_P2P_DEVICE,
};
/**
* struct iwl_fw_dbg_trigger_tlv - a TLV that describes the trigger
* @id: &enum iwl_fw_dbg_trigger
* @vif_type: &enum iwl_fw_dbg_trigger_vif_type
* @stop_conf_ids: bitmap of configurations this trigger relates to.
* if the mode is %IWL_FW_DBG_TRIGGER_STOP, then if the bit corresponding
* to the currently running configuration is set, the data should be
* collected.
* @stop_delay: how many milliseconds to wait before collecting the data
* after the STOP trigger fires.
* @mode: &enum iwl_fw_dbg_trigger_mode - can be stop / start of both
* @start_conf_id: if mode is %IWL_FW_DBG_TRIGGER_START, this defines what
* configuration should be applied when the triggers kicks in.
* @occurrences: number of occurrences. 0 means the trigger will never fire.
* @trig_dis_ms: the time, in milliseconds, after an occurrence of this
* trigger in which another occurrence should be ignored.
* @flags: &enum iwl_fw_dbg_trigger_flags
*/
struct iwl_fw_dbg_trigger_tlv {
__le32 id;
__le32 vif_type;
__le32 stop_conf_ids;
__le32 stop_delay;
u8 mode;
u8 start_conf_id;
__le16 occurrences;
__le16 trig_dis_ms;
u8 flags;
u8 reserved[5];
u8 data[0];
} __packed;
#define FW_DBG_START_FROM_ALIVE 0
#define FW_DBG_CONF_MAX 32
#define FW_DBG_INVALID 0xff
/**
* struct iwl_fw_dbg_trigger_missed_bcon - configures trigger for missed beacons
* @stop_consec_missed_bcon: stop recording if threshold is crossed.
* @stop_consec_missed_bcon_since_rx: stop recording if threshold is crossed.
* @start_consec_missed_bcon: start recording if threshold is crossed.
* @start_consec_missed_bcon_since_rx: start recording if threshold is crossed.
* @reserved1: reserved
* @reserved2: reserved
*/
struct iwl_fw_dbg_trigger_missed_bcon {
__le32 stop_consec_missed_bcon;
__le32 stop_consec_missed_bcon_since_rx;
__le32 reserved2[2];
__le32 start_consec_missed_bcon;
__le32 start_consec_missed_bcon_since_rx;
__le32 reserved1[2];
} __packed;
/**
* struct iwl_fw_dbg_trigger_cmd - configures trigger for messages from FW.
* cmds: the list of commands to trigger the collection on
*/
struct iwl_fw_dbg_trigger_cmd {
struct cmd {
u8 cmd_id;
u8 group_id;
} __packed cmds[16];
} __packed;
/**
* iwl_fw_dbg_trigger_stats - configures trigger for statistics
* @stop_offset: the offset of the value to be monitored
* @stop_threshold: the threshold above which to collect
* @start_offset: the offset of the value to be monitored
* @start_threshold: the threshold above which to start recording
*/
struct iwl_fw_dbg_trigger_stats {
__le32 stop_offset;
__le32 stop_threshold;
__le32 start_offset;
__le32 start_threshold;
} __packed;
/**
* struct iwl_fw_dbg_trigger_low_rssi - trigger for low beacon RSSI
* @rssi: RSSI value to trigger at
*/
struct iwl_fw_dbg_trigger_low_rssi {
__le32 rssi;
} __packed;
/**
* struct iwl_fw_dbg_trigger_mlme - configures trigger for mlme events
* @stop_auth_denied: number of denied authentication to collect
* @stop_auth_timeout: number of authentication timeout to collect
* @stop_rx_deauth: number of Rx deauth before to collect
* @stop_tx_deauth: number of Tx deauth before to collect
* @stop_assoc_denied: number of denied association to collect
* @stop_assoc_timeout: number of association timeout to collect
* @stop_connection_loss: number of connection loss to collect
* @start_auth_denied: number of denied authentication to start recording
* @start_auth_timeout: number of authentication timeout to start recording
* @start_rx_deauth: number of Rx deauth to start recording
* @start_tx_deauth: number of Tx deauth to start recording
* @start_assoc_denied: number of denied association to start recording
* @start_assoc_timeout: number of association timeout to start recording
* @start_connection_loss: number of connection loss to start recording
*/
struct iwl_fw_dbg_trigger_mlme {
u8 stop_auth_denied;
u8 stop_auth_timeout;
u8 stop_rx_deauth;
u8 stop_tx_deauth;
u8 stop_assoc_denied;
u8 stop_assoc_timeout;
u8 stop_connection_loss;
u8 reserved;
u8 start_auth_denied;
u8 start_auth_timeout;
u8 start_rx_deauth;
u8 start_tx_deauth;
u8 start_assoc_denied;
u8 start_assoc_timeout;
u8 start_connection_loss;
u8 reserved2;
} __packed;
/**
* struct iwl_fw_dbg_trigger_txq_timer - configures the Tx queue's timer
* @command_queue: timeout for the command queue in ms
* @bss: timeout for the queues of a BSS (except for TDLS queues) in ms
* @softap: timeout for the queues of a softAP in ms
* @p2p_go: timeout for the queues of a P2P GO in ms
* @p2p_client: timeout for the queues of a P2P client in ms
* @p2p_device: timeout for the queues of a P2P device in ms
* @ibss: timeout for the queues of an IBSS in ms
* @tdls: timeout for the queues of a TDLS station in ms
*/
struct iwl_fw_dbg_trigger_txq_timer {
__le32 command_queue;
__le32 bss;
__le32 softap;
__le32 p2p_go;
__le32 p2p_client;
__le32 p2p_device;
__le32 ibss;
__le32 tdls;
__le32 reserved[4];
} __packed;
/**
* struct iwl_fw_dbg_trigger_time_event - configures a time event trigger
* time_Events: a list of tuples <id, action_bitmap>. The driver will issue a
* trigger each time a time event notification that relates to time event
* id with one of the actions in the bitmap is received and
* BIT(notif->status) is set in status_bitmap.
*
*/
struct iwl_fw_dbg_trigger_time_event {
struct {
__le32 id;
__le32 action_bitmap;
__le32 status_bitmap;
} __packed time_events[16];
} __packed;
/**
* struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger
* rx_ba_start: tid bitmap to configure on what tid the trigger should occur
* when an Rx BlockAck session is started.
* rx_ba_stop: tid bitmap to configure on what tid the trigger should occur
* when an Rx BlockAck session is stopped.
* tx_ba_start: tid bitmap to configure on what tid the trigger should occur
* when a Tx BlockAck session is started.
* tx_ba_stop: tid bitmap to configure on what tid the trigger should occur
* when a Tx BlockAck session is stopped.
* rx_bar: tid bitmap to configure on what tid the trigger should occur
* when a BAR is received (for a Tx BlockAck session).
* tx_bar: tid bitmap to configure on what tid the trigger should occur
* when a BAR is send (for an Rx BlocAck session).
* frame_timeout: tid bitmap to configure on what tid the trigger should occur
* when a frame times out in the reodering buffer.
*/
struct iwl_fw_dbg_trigger_ba {
__le16 rx_ba_start;
__le16 rx_ba_stop;
__le16 tx_ba_start;
__le16 tx_ba_stop;
__le16 rx_bar;
__le16 tx_bar;
__le16 frame_timeout;
} __packed;
/**
* struct iwl_fw_dbg_trigger_tdls - configures trigger for TDLS events.
* @action_bitmap: the TDLS action to trigger the collection upon
* @peer_mode: trigger on specific peer or all
* @peer: the TDLS peer to trigger the collection on
*/
struct iwl_fw_dbg_trigger_tdls {
u8 action_bitmap;
u8 peer_mode;
u8 peer[ETH_ALEN];
u8 reserved[4];
} __packed;
/**
* struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response
* status.
* @statuses: the list of statuses to trigger the collection on
*/
struct iwl_fw_dbg_trigger_tx_status {
struct tx_status {
u8 status;
u8 reserved[3];
} __packed statuses[16];
__le32 reserved[2];
} __packed;
/**
* struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration.
* @id: conf id
* @usniffer: should the uSniffer image be used
* @num_of_hcmds: how many HCMDs to send are present here
* @hcmd: a variable length host command to be sent to apply the configuration.
* If there is more than one HCMD to send, they will appear one after the
* other and be sent in the order that they appear in.
* This parses IWL_UCODE_TLV_FW_DBG_CONF. The user can add up-to
* %FW_DBG_CONF_MAX configuration per run.
*/
struct iwl_fw_dbg_conf_tlv {
u8 id;
u8 usniffer;
u8 reserved;
u8 num_of_hcmds;
struct iwl_fw_dbg_conf_hcmd hcmd;
} __packed;
#endif /* __iwl_fw_file_h__ */