drivers/net/wireless/rsi/rsi_91x_main.c - hafnium/third_party/linux - Git at Google

 /**
  * Copyright (c) 2014 Redpine Signals Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

 #include <linux/module.h>
 #include <linux/firmware.h>
 #include <net/rsi_91x.h>
 #include "rsi_mgmt.h"
 #include "rsi_common.h"
 #include "rsi_coex.h"
 #include "rsi_hal.h"

 u32 rsi_zone_enabled = /* INFO_ZONE |
 			INIT_ZONE |
 			MGMT_TX_ZONE |
 			MGMT_RX_ZONE |
 			DATA_TX_ZONE |
 			DATA_RX_ZONE |
 			FSM_ZONE |
 			ISR_ZONE | */
 			ERR_ZONE |
 			0;
 EXPORT_SYMBOL_GPL(rsi_zone_enabled);

 #ifdef CONFIG_RSI_COEX
 static struct rsi_proto_ops g_proto_ops = {
 	.coex_send_pkt = rsi_coex_send_pkt,
 	.get_host_intf = rsi_get_host_intf,
 	.set_bt_context = rsi_set_bt_context,
 };
 #endif

 /**
  * rsi_dbg() - This function outputs informational messages.
  * @zone: Zone of interest for output message.
  * @fmt: printf-style format for output message.
  *
  * Return: none
  */
 void rsi_dbg(u32 zone, const char *fmt, ...)
 {
 	struct va_format vaf;
 	va_list args;

 	va_start(args, fmt);

 	vaf.fmt = fmt;
 	vaf.va = &args;

 	if (zone & rsi_zone_enabled)
 		pr_info("%pV", &vaf);
 	va_end(args);
 }
 EXPORT_SYMBOL_GPL(rsi_dbg);

 static char *opmode_str(int oper_mode)
 {
 	switch (oper_mode) {
 	case DEV_OPMODE_WIFI_ALONE:
 		return "Wi-Fi alone";
 	case DEV_OPMODE_BT_ALONE:
 		return "BT EDR alone";
 	case DEV_OPMODE_BT_LE_ALONE:
 		return "BT LE alone";
 	case DEV_OPMODE_BT_DUAL:
 		return "BT Dual";
 	case DEV_OPMODE_STA_BT:
 		return "Wi-Fi STA + BT EDR";
 	case DEV_OPMODE_STA_BT_LE:
 		return "Wi-Fi STA + BT LE";
 	case DEV_OPMODE_STA_BT_DUAL:
 		return "Wi-Fi STA + BT DUAL";
 	case DEV_OPMODE_AP_BT:
 		return "Wi-Fi AP + BT EDR";
 	case DEV_OPMODE_AP_BT_DUAL:
 		return "Wi-Fi AP + BT DUAL";
 	}

 	return "Unknown";
 }

 void rsi_print_version(struct rsi_common *common)
 {
 	rsi_dbg(ERR_ZONE, "================================================\n");
 	rsi_dbg(ERR_ZONE, "================ RSI Version Info ==============\n");
 	rsi_dbg(ERR_ZONE, "================================================\n");
 	rsi_dbg(ERR_ZONE, "FW Version\t: %d.%d.%d\n",
 		common->lmac_ver.major, common->lmac_ver.minor,
 		common->lmac_ver.release_num);
 	rsi_dbg(ERR_ZONE, "Operating mode\t: %d [%s]",
 		common->oper_mode, opmode_str(common->oper_mode));
 	rsi_dbg(ERR_ZONE, "Firmware file\t: %s", common->priv->fw_file_name);
 	rsi_dbg(ERR_ZONE, "================================================\n");
 }

 /**
  * rsi_prepare_skb() - This function prepares the skb.
  * @common: Pointer to the driver private structure.
  * @buffer: Pointer to the packet data.
  * @pkt_len: Length of the packet.
  * @extended_desc: Extended descriptor.
  *
  * Return: Successfully skb.
  */
 static struct sk_buff *rsi_prepare_skb(struct rsi_common *common,
 				       u8 *buffer,
 				       u32 pkt_len,
 				       u8 extended_desc)
 {
 	struct ieee80211_tx_info *info;
 	struct sk_buff *skb = NULL;
 	u8 payload_offset;
 	struct ieee80211_vif *vif;
 	struct ieee80211_hdr *wh;

 	if (WARN(!pkt_len, "%s: Dummy pkt received", __func__))
 		return NULL;

 	if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) {
 		rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n",
 			__func__, pkt_len);
 		pkt_len = RSI_RCV_BUFFER_LEN * 4;
 	}

 	pkt_len -= extended_desc;
 	skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ);
 	if (skb == NULL)
 		return NULL;

 	payload_offset = (extended_desc + FRAME_DESC_SZ);
 	skb_put(skb, pkt_len);
 	memcpy((skb->data), (buffer + payload_offset), skb->len);
 	wh = (struct ieee80211_hdr *)skb->data;
 	vif = rsi_get_vif(common->priv, wh->addr1);

 	info = IEEE80211_SKB_CB(skb);
 	return skb;
 }

 /**
  * rsi_read_pkt() - This function reads frames from the card.
  * @common: Pointer to the driver private structure.
  * @rcv_pkt_len: Received pkt length. In case of USB it is 0.
  *
  * Return: 0 on success, -1 on failure.
  */
 int rsi_read_pkt(struct rsi_common *common, u8 *rx_pkt, s32 rcv_pkt_len)
 {
 	u8 *frame_desc = NULL, extended_desc = 0;
 	u32 index, length = 0, queueno = 0;
 	u16 actual_length = 0, offset;
 	struct sk_buff *skb = NULL;
 #ifdef CONFIG_RSI_COEX
 	u8 bt_pkt_type;
 #endif

 	index = 0;
 	do {
 		frame_desc = &rx_pkt[index];
 		actual_length = *(u16 *)&frame_desc[0];
 		offset = *(u16 *)&frame_desc[2];

 		queueno = rsi_get_queueno(frame_desc, offset);
 		length = rsi_get_length(frame_desc, offset);

 		/* Extended descriptor is valid for WLAN queues only */
 		if (queueno == RSI_WIFI_DATA_Q || queueno == RSI_WIFI_MGMT_Q)
 			extended_desc = rsi_get_extended_desc(frame_desc,
 							      offset);

 		switch (queueno) {
 		case RSI_COEX_Q:
 #ifdef CONFIG_RSI_COEX
 			if (common->coex_mode > 1)
 				rsi_coex_recv_pkt(common, frame_desc + offset);
 			else
 #endif
 				rsi_mgmt_pkt_recv(common,
 						  (frame_desc + offset));
 			break;

 		case RSI_WIFI_DATA_Q:
 			skb = rsi_prepare_skb(common,
 					      (frame_desc + offset),
 					      length,
 					      extended_desc);
 			if (skb == NULL)
 				goto fail;

 			rsi_indicate_pkt_to_os(common, skb);
 			break;

 		case RSI_WIFI_MGMT_Q:
 			rsi_mgmt_pkt_recv(common, (frame_desc + offset));
 			break;

 #ifdef CONFIG_RSI_COEX
 		case RSI_BT_MGMT_Q:
 		case RSI_BT_DATA_Q:
 #define BT_RX_PKT_TYPE_OFST	14
 #define BT_CARD_READY_IND	0x89
 			bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
 			if (bt_pkt_type == BT_CARD_READY_IND) {
 				rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
 				if (rsi_bt_ops.attach(common, &g_proto_ops))
 					rsi_dbg(ERR_ZONE,
 						"Failed to attach BT module\n");
 			} else {
 				if (common->bt_adapter)
 					rsi_bt_ops.recv_pkt(common->bt_adapter,
 							frame_desc + offset);
 			}
 			break;
 #endif

 		default:
 			rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
 				__func__,   queueno);
 			goto fail;
 		}

 		index  += actual_length;
 		rcv_pkt_len -= actual_length;
 	} while (rcv_pkt_len > 0);

 	return 0;
 fail:
 	return -EINVAL;
 }
 EXPORT_SYMBOL_GPL(rsi_read_pkt);

 /**
  * rsi_tx_scheduler_thread() - This function is a kernel thread to send the
  *			       packets to the device.
  * @common: Pointer to the driver private structure.
  *
  * Return: None.
  */
 static void rsi_tx_scheduler_thread(struct rsi_common *common)
 {
 	struct rsi_hw *adapter = common->priv;
 	u32 timeout = EVENT_WAIT_FOREVER;

 	do {
 		if (adapter->determine_event_timeout)
 			timeout = adapter->determine_event_timeout(adapter);
 		rsi_wait_event(&common->tx_thread.event, timeout);
 		rsi_reset_event(&common->tx_thread.event);

 		if (common->init_done)
 			rsi_core_qos_processor(common);
 	} while (atomic_read(&common->tx_thread.thread_done) == 0);
 	complete_and_exit(&common->tx_thread.completion, 0);
 }

 #ifdef CONFIG_RSI_COEX
 enum rsi_host_intf rsi_get_host_intf(void *priv)
 {
 	struct rsi_common *common = (struct rsi_common *)priv;

 	return common->priv->rsi_host_intf;
 }

 void rsi_set_bt_context(void *priv, void *bt_context)
 {
 	struct rsi_common *common = (struct rsi_common *)priv;

 	common->bt_adapter = bt_context;
 }
 #endif

 /**
  * rsi_91x_init() - This function initializes os interface operations.
  * @void: Void.
  *
  * Return: Pointer to the adapter structure on success, NULL on failure .
  */
 struct rsi_hw *rsi_91x_init(u16 oper_mode)
 {
 	struct rsi_hw *adapter = NULL;
 	struct rsi_common *common = NULL;
 	u8 ii = 0;

 	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
 	if (!adapter)
 		return NULL;

 	adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL);
 	if (adapter->priv == NULL) {
 		rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n",
 			__func__);
 		kfree(adapter);
 		return NULL;
 	} else {
 		common = adapter->priv;
 		common->priv = adapter;
 	}

 	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
 		skb_queue_head_init(&common->tx_queue[ii]);

 	rsi_init_event(&common->tx_thread.event);
 	mutex_init(&common->mutex);
 	mutex_init(&common->tx_lock);
 	mutex_init(&common->rx_lock);
 	mutex_init(&common->tx_bus_mutex);

 	if (rsi_create_kthread(common,
 			       &common->tx_thread,
 			       rsi_tx_scheduler_thread,
 			       "Tx-Thread")) {
 		rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__);
 		goto err;
 	}

 	rsi_default_ps_params(adapter);
 	spin_lock_init(&adapter->ps_lock);
 	timer_setup(&common->roc_timer, rsi_roc_timeout, 0);
 	init_completion(&common->wlan_init_completion);
 	adapter->device_model = RSI_DEV_9113;
 	common->oper_mode = oper_mode;

 	/* Determine coex mode */
 	switch (common->oper_mode) {
 	case DEV_OPMODE_STA_BT_DUAL:
 	case DEV_OPMODE_STA_BT:
 	case DEV_OPMODE_STA_BT_LE:
 	case DEV_OPMODE_BT_ALONE:
 	case DEV_OPMODE_BT_LE_ALONE:
 	case DEV_OPMODE_BT_DUAL:
 		common->coex_mode = 2;
 		break;
 	case DEV_OPMODE_AP_BT_DUAL:
 	case DEV_OPMODE_AP_BT:
 		common->coex_mode = 4;
 		break;
 	case DEV_OPMODE_WIFI_ALONE:
 		common->coex_mode = 1;
 		break;
 	default:
 		common->oper_mode = 1;
 		common->coex_mode = 1;
 	}
 	rsi_dbg(INFO_ZONE, "%s: oper_mode = %d, coex_mode = %d\n",
 		__func__, common->oper_mode, common->coex_mode);

 	adapter->device_model = RSI_DEV_9113;
 #ifdef CONFIG_RSI_COEX
 	if (common->coex_mode > 1) {
 		if (rsi_coex_attach(common)) {
 			rsi_dbg(ERR_ZONE, "Failed to init coex module\n");
 			goto err;
 		}
 	}
 #endif

 	common->init_done = true;
 	return adapter;

 err:
 	kfree(common);
 	kfree(adapter);
 	return NULL;
 }
 EXPORT_SYMBOL_GPL(rsi_91x_init);

 /**
  * rsi_91x_deinit() - This function de-intializes os intf operations.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: None.
  */
 void rsi_91x_deinit(struct rsi_hw *adapter)
 {
 	struct rsi_common *common = adapter->priv;
 	u8 ii;

 	rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__);

 	rsi_kill_thread(&common->tx_thread);

 	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
 		skb_queue_purge(&common->tx_queue[ii]);

 #ifdef CONFIG_RSI_COEX
 	if (common->coex_mode > 1) {
 		if (common->bt_adapter) {
 			rsi_bt_ops.detach(common->bt_adapter);
 			common->bt_adapter = NULL;
 		}
 		rsi_coex_detach(common);
 	}
 #endif

 	common->init_done = false;

 	kfree(common);
 	kfree(adapter->rsi_dev);
 	kfree(adapter);
 }
 EXPORT_SYMBOL_GPL(rsi_91x_deinit);

 /**
  * rsi_91x_hal_module_init() - This function is invoked when the module is
  *			       loaded into the kernel.
  *			       It registers the client driver.
  * @void: Void.
  *
  * Return: 0 on success, -1 on failure.
  */
 static int rsi_91x_hal_module_init(void)
 {
 	rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__);
 	return 0;
 }

 /**
  * rsi_91x_hal_module_exit() - This function is called at the time of
  *			       removing/unloading the module.
  *			       It unregisters the client driver.
  * @void: Void.
  *
  * Return: None.
  */
 static void rsi_91x_hal_module_exit(void)
 {
 	rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__);
 }

 module_init(rsi_91x_hal_module_init);
 module_exit(rsi_91x_hal_module_exit);
 MODULE_AUTHOR("Redpine Signals Inc");
 MODULE_DESCRIPTION("Station driver for RSI 91x devices");
 MODULE_SUPPORTED_DEVICE("RSI-91x");
 MODULE_VERSION("0.1");
 MODULE_LICENSE("Dual BSD/GPL");
	/**
	* Copyright (c) 2014 Redpine Signals Inc.
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

	#include <linux/module.h>
	#include <linux/firmware.h>
	#include <net/rsi_91x.h>
	#include "rsi_mgmt.h"
	#include "rsi_common.h"
	#include "rsi_coex.h"
	#include "rsi_hal.h"

	u32 rsi_zone_enabled = /* INFO_ZONE \|
	INIT_ZONE \|
	MGMT_TX_ZONE \|
	MGMT_RX_ZONE \|
	DATA_TX_ZONE \|
	DATA_RX_ZONE \|
	FSM_ZONE \|
	ISR_ZONE \| */
	ERR_ZONE \|
	0;
	EXPORT_SYMBOL_GPL(rsi_zone_enabled);

	#ifdef CONFIG_RSI_COEX
	static struct rsi_proto_ops g_proto_ops = {
	.coex_send_pkt = rsi_coex_send_pkt,
	.get_host_intf = rsi_get_host_intf,
	.set_bt_context = rsi_set_bt_context,
	};
	#endif

	/**
	* rsi_dbg() - This function outputs informational messages.
	* @zone: Zone of interest for output message.
	* @fmt: printf-style format for output message.
	*
	* Return: none
	*/
	void rsi_dbg(u32 zone, const char *fmt, ...)
	{
	struct va_format vaf;
	va_list args;

	va_start(args, fmt);

	vaf.fmt = fmt;
	vaf.va = &args;

	if (zone & rsi_zone_enabled)
	pr_info("%pV", &vaf);
	va_end(args);
	}
	EXPORT_SYMBOL_GPL(rsi_dbg);

	static char *opmode_str(int oper_mode)
	{
	switch (oper_mode) {
	case DEV_OPMODE_WIFI_ALONE:
	return "Wi-Fi alone";
	case DEV_OPMODE_BT_ALONE:
	return "BT EDR alone";
	case DEV_OPMODE_BT_LE_ALONE:
	return "BT LE alone";
	case DEV_OPMODE_BT_DUAL:
	return "BT Dual";
	case DEV_OPMODE_STA_BT:
	return "Wi-Fi STA + BT EDR";
	case DEV_OPMODE_STA_BT_LE:
	return "Wi-Fi STA + BT LE";
	case DEV_OPMODE_STA_BT_DUAL:
	return "Wi-Fi STA + BT DUAL";
	case DEV_OPMODE_AP_BT:
	return "Wi-Fi AP + BT EDR";
	case DEV_OPMODE_AP_BT_DUAL:
	return "Wi-Fi AP + BT DUAL";
	}

	return "Unknown";
	}

	void rsi_print_version(struct rsi_common *common)
	{
	rsi_dbg(ERR_ZONE, "================================================\n");
	rsi_dbg(ERR_ZONE, "================ RSI Version Info ==============\n");
	rsi_dbg(ERR_ZONE, "================================================\n");
	rsi_dbg(ERR_ZONE, "FW Version\t: %d.%d.%d\n",
	common->lmac_ver.major, common->lmac_ver.minor,
	common->lmac_ver.release_num);
	rsi_dbg(ERR_ZONE, "Operating mode\t: %d [%s]",
	common->oper_mode, opmode_str(common->oper_mode));
	rsi_dbg(ERR_ZONE, "Firmware file\t: %s", common->priv->fw_file_name);
	rsi_dbg(ERR_ZONE, "================================================\n");
	}

	/**
	* rsi_prepare_skb() - This function prepares the skb.
	* @common: Pointer to the driver private structure.
	* @buffer: Pointer to the packet data.
	* @pkt_len: Length of the packet.
	* @extended_desc: Extended descriptor.
	*
	* Return: Successfully skb.
	*/
	static struct sk_buff rsi_prepare_skb(struct rsi_common common,
	u8 *buffer,
	u32 pkt_len,
	u8 extended_desc)
	{
	struct ieee80211_tx_info *info;
	struct sk_buff *skb = NULL;
	u8 payload_offset;
	struct ieee80211_vif *vif;
	struct ieee80211_hdr *wh;

	if (WARN(!pkt_len, "%s: Dummy pkt received", __func__))
	return NULL;

	if (pkt_len > (RSI_RCV_BUFFER_LEN * 4)) {
	rsi_dbg(ERR_ZONE, "%s: Pkt size > max rx buf size %d\n",
	__func__, pkt_len);
	pkt_len = RSI_RCV_BUFFER_LEN * 4;
	}

	pkt_len -= extended_desc;
	skb = dev_alloc_skb(pkt_len + FRAME_DESC_SZ);
	if (skb == NULL)
	return NULL;

	payload_offset = (extended_desc + FRAME_DESC_SZ);
	skb_put(skb, pkt_len);
	memcpy((skb->data), (buffer + payload_offset), skb->len);
	wh = (struct ieee80211_hdr *)skb->data;
	vif = rsi_get_vif(common->priv, wh->addr1);

	info = IEEE80211_SKB_CB(skb);
	return skb;
	}

	/**
	* rsi_read_pkt() - This function reads frames from the card.
	* @common: Pointer to the driver private structure.
	* @rcv_pkt_len: Received pkt length. In case of USB it is 0.
	*
	* Return: 0 on success, -1 on failure.
	*/
	int rsi_read_pkt(struct rsi_common common, u8 rx_pkt, s32 rcv_pkt_len)
	{
	u8 *frame_desc = NULL, extended_desc = 0;
	u32 index, length = 0, queueno = 0;
	u16 actual_length = 0, offset;
	struct sk_buff *skb = NULL;
	#ifdef CONFIG_RSI_COEX
	u8 bt_pkt_type;
	#endif

	index = 0;
	do {
	frame_desc = &rx_pkt[index];
	actual_length = (u16 )&frame_desc[0];
	offset = (u16 )&frame_desc[2];

	queueno = rsi_get_queueno(frame_desc, offset);
	length = rsi_get_length(frame_desc, offset);

	/* Extended descriptor is valid for WLAN queues only */
	if (queueno == RSI_WIFI_DATA_Q \|\| queueno == RSI_WIFI_MGMT_Q)
	extended_desc = rsi_get_extended_desc(frame_desc,
	offset);

	switch (queueno) {
	case RSI_COEX_Q:
	#ifdef CONFIG_RSI_COEX
	if (common->coex_mode > 1)
	rsi_coex_recv_pkt(common, frame_desc + offset);
	else
	#endif
	rsi_mgmt_pkt_recv(common,
	(frame_desc + offset));
	break;

	case RSI_WIFI_DATA_Q:
	skb = rsi_prepare_skb(common,
	(frame_desc + offset),
	length,
	extended_desc);
	if (skb == NULL)
	goto fail;

	rsi_indicate_pkt_to_os(common, skb);
	break;

	case RSI_WIFI_MGMT_Q:
	rsi_mgmt_pkt_recv(common, (frame_desc + offset));
	break;

	#ifdef CONFIG_RSI_COEX
	case RSI_BT_MGMT_Q:
	case RSI_BT_DATA_Q:
	#define BT_RX_PKT_TYPE_OFST 14
	#define BT_CARD_READY_IND 0x89
	bt_pkt_type = frame_desc[offset + BT_RX_PKT_TYPE_OFST];
	if (bt_pkt_type == BT_CARD_READY_IND) {
	rsi_dbg(INFO_ZONE, "BT Card ready recvd\n");
	if (rsi_bt_ops.attach(common, &g_proto_ops))
	rsi_dbg(ERR_ZONE,
	"Failed to attach BT module\n");
	} else {
	if (common->bt_adapter)
	rsi_bt_ops.recv_pkt(common->bt_adapter,
	frame_desc + offset);
	}
	break;
	#endif

	default:
	rsi_dbg(ERR_ZONE, "%s: pkt from invalid queue: %d\n",
	__func__, queueno);
	goto fail;
	}

	index += actual_length;
	rcv_pkt_len -= actual_length;
	} while (rcv_pkt_len > 0);

	return 0;
	fail:
	return -EINVAL;
	}
	EXPORT_SYMBOL_GPL(rsi_read_pkt);

	/**
	* rsi_tx_scheduler_thread() - This function is a kernel thread to send the
	* packets to the device.
	* @common: Pointer to the driver private structure.
	*
	* Return: None.
	*/
	static void rsi_tx_scheduler_thread(struct rsi_common *common)
	{
	struct rsi_hw *adapter = common->priv;
	u32 timeout = EVENT_WAIT_FOREVER;

	do {
	if (adapter->determine_event_timeout)
	timeout = adapter->determine_event_timeout(adapter);
	rsi_wait_event(&common->tx_thread.event, timeout);
	rsi_reset_event(&common->tx_thread.event);

	if (common->init_done)
	rsi_core_qos_processor(common);
	} while (atomic_read(&common->tx_thread.thread_done) == 0);
	complete_and_exit(&common->tx_thread.completion, 0);
	}

	#ifdef CONFIG_RSI_COEX
	enum rsi_host_intf rsi_get_host_intf(void *priv)
	{
	struct rsi_common common = (struct rsi_common )priv;

	return common->priv->rsi_host_intf;
	}

	void rsi_set_bt_context(void priv, void bt_context)
	{
	struct rsi_common common = (struct rsi_common )priv;

	common->bt_adapter = bt_context;
	}
	#endif

	/**
	* rsi_91x_init() - This function initializes os interface operations.
	* @void: Void.
	*
	* Return: Pointer to the adapter structure on success, NULL on failure .
	*/
	struct rsi_hw *rsi_91x_init(u16 oper_mode)
	{
	struct rsi_hw *adapter = NULL;
	struct rsi_common *common = NULL;
	u8 ii = 0;

	adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
	if (!adapter)
	return NULL;

	adapter->priv = kzalloc(sizeof(*common), GFP_KERNEL);
	if (adapter->priv == NULL) {
	rsi_dbg(ERR_ZONE, "%s: Failed in allocation of memory\n",
	__func__);
	kfree(adapter);
	return NULL;
	} else {
	common = adapter->priv;
	common->priv = adapter;
	}

	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
	skb_queue_head_init(&common->tx_queue[ii]);

	rsi_init_event(&common->tx_thread.event);
	mutex_init(&common->mutex);
	mutex_init(&common->tx_lock);
	mutex_init(&common->rx_lock);
	mutex_init(&common->tx_bus_mutex);

	if (rsi_create_kthread(common,
	&common->tx_thread,
	rsi_tx_scheduler_thread,
	"Tx-Thread")) {
	rsi_dbg(ERR_ZONE, "%s: Unable to init tx thrd\n", __func__);
	goto err;
	}

	rsi_default_ps_params(adapter);
	spin_lock_init(&adapter->ps_lock);
	timer_setup(&common->roc_timer, rsi_roc_timeout, 0);
	init_completion(&common->wlan_init_completion);
	adapter->device_model = RSI_DEV_9113;
	common->oper_mode = oper_mode;

	/* Determine coex mode */
	switch (common->oper_mode) {
	case DEV_OPMODE_STA_BT_DUAL:
	case DEV_OPMODE_STA_BT:
	case DEV_OPMODE_STA_BT_LE:
	case DEV_OPMODE_BT_ALONE:
	case DEV_OPMODE_BT_LE_ALONE:
	case DEV_OPMODE_BT_DUAL:
	common->coex_mode = 2;
	break;
	case DEV_OPMODE_AP_BT_DUAL:
	case DEV_OPMODE_AP_BT:
	common->coex_mode = 4;
	break;
	case DEV_OPMODE_WIFI_ALONE:
	common->coex_mode = 1;
	break;
	default:
	common->oper_mode = 1;
	common->coex_mode = 1;
	}
	rsi_dbg(INFO_ZONE, "%s: oper_mode = %d, coex_mode = %d\n",
	__func__, common->oper_mode, common->coex_mode);

	adapter->device_model = RSI_DEV_9113;
	#ifdef CONFIG_RSI_COEX
	if (common->coex_mode > 1) {
	if (rsi_coex_attach(common)) {
	rsi_dbg(ERR_ZONE, "Failed to init coex module\n");
	goto err;
	}
	}
	#endif

	common->init_done = true;
	return adapter;

	err:
	kfree(common);
	kfree(adapter);
	return NULL;
	}
	EXPORT_SYMBOL_GPL(rsi_91x_init);

	/**
	* rsi_91x_deinit() - This function de-intializes os intf operations.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: None.
	*/
	void rsi_91x_deinit(struct rsi_hw *adapter)
	{
	struct rsi_common *common = adapter->priv;
	u8 ii;

	rsi_dbg(INFO_ZONE, "%s: Performing deinit os ops\n", __func__);

	rsi_kill_thread(&common->tx_thread);

	for (ii = 0; ii < NUM_SOFT_QUEUES; ii++)
	skb_queue_purge(&common->tx_queue[ii]);

	#ifdef CONFIG_RSI_COEX
	if (common->coex_mode > 1) {
	if (common->bt_adapter) {
	rsi_bt_ops.detach(common->bt_adapter);
	common->bt_adapter = NULL;
	}
	rsi_coex_detach(common);
	}
	#endif

	common->init_done = false;

	kfree(common);
	kfree(adapter->rsi_dev);
	kfree(adapter);
	}
	EXPORT_SYMBOL_GPL(rsi_91x_deinit);

	/**
	* rsi_91x_hal_module_init() - This function is invoked when the module is
	* loaded into the kernel.
	* It registers the client driver.
	* @void: Void.
	*
	* Return: 0 on success, -1 on failure.
	*/
	static int rsi_91x_hal_module_init(void)
	{
	rsi_dbg(INIT_ZONE, "%s: Module init called\n", __func__);
	return 0;
	}

	/**
	* rsi_91x_hal_module_exit() - This function is called at the time of
	* removing/unloading the module.
	* It unregisters the client driver.
	* @void: Void.
	*
	* Return: None.
	*/
	static void rsi_91x_hal_module_exit(void)
	{
	rsi_dbg(INIT_ZONE, "%s: Module exit called\n", __func__);
	}

	module_init(rsi_91x_hal_module_init);
	module_exit(rsi_91x_hal_module_exit);
	MODULE_AUTHOR("Redpine Signals Inc");
	MODULE_DESCRIPTION("Station driver for RSI 91x devices");
	MODULE_SUPPORTED_DEVICE("RSI-91x");
	MODULE_VERSION("0.1");
	MODULE_LICENSE("Dual BSD/GPL");