blob: c0430a41e24b9bb1b716d9fbe26ae5978a570b9e [file] [log] [blame]
/*
* Intel Wireless UWB Link 1480
* USB SKU firmware upload implementation
*
* Copyright (C) 2005-2006 Intel Corporation
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*
* This driver will prepare the i1480 device to behave as a real
* Wireless USB HWA adaptor by uploading the firmware.
*
* When the device is connected or driver is loaded, i1480_usb_probe()
* is called--this will allocate and initialize the device structure,
* fill in the pointers to the common functions (read, write,
* wait_init_done and cmd for HWA command execution) and once that is
* done, call the common firmware uploading routine. Then clean up and
* return -ENODEV, as we don't attach to the device.
*
* The rest are the basic ops we implement that the fw upload code
* uses to do its job. All the ops in the common code are i1480->NAME,
* the functions are i1480_usb_NAME().
*/
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/uwb.h>
#include <linux/usb/wusb.h>
#include <linux/usb/wusb-wa.h>
#include "i1480-dfu.h"
struct i1480_usb {
struct i1480 i1480;
struct usb_device *usb_dev;
struct usb_interface *usb_iface;
struct urb *neep_urb; /* URB for reading from EP1 */
};
static
void i1480_usb_init(struct i1480_usb *i1480_usb)
{
i1480_init(&i1480_usb->i1480);
}
static
int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface)
{
struct usb_device *usb_dev = interface_to_usbdev(iface);
int result = -ENOMEM;
i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */
i1480_usb->usb_iface = usb_get_intf(iface);
usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */
i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL);
if (i1480_usb->neep_urb == NULL)
goto error;
return 0;
error:
usb_set_intfdata(iface, NULL);
usb_put_intf(iface);
usb_put_dev(usb_dev);
return result;
}
static
void i1480_usb_destroy(struct i1480_usb *i1480_usb)
{
usb_kill_urb(i1480_usb->neep_urb);
usb_free_urb(i1480_usb->neep_urb);
usb_set_intfdata(i1480_usb->usb_iface, NULL);
usb_put_intf(i1480_usb->usb_iface);
usb_put_dev(i1480_usb->usb_dev);
}
/**
* Write a buffer to a memory address in the i1480 device
*
* @i1480: i1480 instance
* @memory_address:
* Address where to write the data buffer to.
* @buffer: Buffer to the data
* @size: Size of the buffer [has to be < 512].
* @returns: 0 if ok, < 0 errno code on error.
*
* Data buffers to USB cannot be on the stack or in vmalloc'ed areas,
* so we copy it to the local i1480 buffer before proceeding. In any
* case, we have a max size we can send.
*/
static
int i1480_usb_write(struct i1480 *i1480, u32 memory_address,
const void *buffer, size_t size)
{
int result = 0;
struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
size_t buffer_size, itr = 0;
BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
while (size > 0) {
buffer_size = size < i1480->buf_size ? size : i1480->buf_size;
memcpy(i1480->cmd_buf, buffer + itr, buffer_size);
result = usb_control_msg(
i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
memory_address, (memory_address >> 16),
i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */);
if (result < 0)
break;
itr += result;
memory_address += result;
size -= result;
}
return result;
}
/**
* Read a block [max size 512] of the device's memory to @i1480's buffer.
*
* @i1480: i1480 instance
* @memory_address:
* Address where to read from.
* @size: Size to read. Smaller than or equal to 512.
* @returns: >= 0 number of bytes written if ok, < 0 errno code on error.
*
* NOTE: if the memory address or block is incorrect, you might get a
* stall or a different memory read. Caller has to verify the
* memory address and size passed back in the @neh structure.
*/
static
int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size)
{
ssize_t result = 0, bytes = 0;
size_t itr, read_size = i1480->buf_size;
struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
BUG_ON(size > i1480->buf_size);
BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */
BUG_ON(read_size > 512);
if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */
read_size = 4;
for (itr = 0; itr < size; itr += read_size) {
size_t itr_addr = addr + itr;
size_t itr_size = min(read_size, size - itr);
result = usb_control_msg(
i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0),
0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
itr_addr, (itr_addr >> 16),
i1480->cmd_buf + itr, itr_size,
100 /* FIXME: arbitrary */);
if (result < 0) {
dev_err(i1480->dev, "%s: USB read error: %zd\n",
__func__, result);
goto out;
}
if (result != itr_size) {
result = -EIO;
dev_err(i1480->dev,
"%s: partial read got only %zu bytes vs %zu expected\n",
__func__, result, itr_size);
goto out;
}
bytes += result;
}
result = bytes;
out:
return result;
}
/**
* Callback for reads on the notification/event endpoint
*
* Just enables the completion read handler.
*/
static
void i1480_usb_neep_cb(struct urb *urb)
{
struct i1480 *i1480 = urb->context;
struct device *dev = i1480->dev;
switch (urb->status) {
case 0:
break;
case -ECONNRESET: /* Not an error, but a controlled situation; */
case -ENOENT: /* (we killed the URB)...so, no broadcast */
dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status);
break;
case -ESHUTDOWN: /* going away! */
dev_dbg(dev, "NEEP: down %d\n", urb->status);
break;
default:
dev_err(dev, "NEEP: unknown status %d\n", urb->status);
break;
}
i1480->evt_result = urb->actual_length;
complete(&i1480->evt_complete);
return;
}
/**
* Wait for the MAC FW to initialize
*
* MAC FW sends a 0xfd/0101/00 notification to EP1 when done
* initializing. Get that notification into i1480->evt_buf; upper layer
* will verify it.
*
* Set i1480->evt_result with the result of getting the event or its
* size (if successful).
*
* Delivers the data directly to i1480->evt_buf
*/
static
int i1480_usb_wait_init_done(struct i1480 *i1480)
{
int result;
struct device *dev = i1480->dev;
struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
struct usb_endpoint_descriptor *epd;
init_completion(&i1480->evt_complete);
i1480->evt_result = -EINPROGRESS;
epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev,
usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
i1480->evt_buf, i1480->buf_size,
i1480_usb_neep_cb, i1480, epd->bInterval);
result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
if (result < 0) {
dev_err(dev, "init done: cannot submit NEEP read: %d\n",
result);
goto error_submit;
}
/* Wait for the USB callback to get the data */
result = wait_for_completion_interruptible_timeout(
&i1480->evt_complete, HZ);
if (result <= 0) {
result = result == 0 ? -ETIMEDOUT : result;
goto error_wait;
}
usb_kill_urb(i1480_usb->neep_urb);
return 0;
error_wait:
usb_kill_urb(i1480_usb->neep_urb);
error_submit:
i1480->evt_result = result;
return result;
}
/**
* Generic function for issuing commands to the i1480
*
* @i1480: i1480 instance
* @cmd_name: Name of the command (for error messages)
* @cmd: Pointer to command buffer
* @cmd_size: Size of the command buffer
* @reply: Buffer for the reply event
* @reply_size: Expected size back (including RCEB); the reply buffer
* is assumed to be as big as this.
* @returns: >= 0 size of the returned event data if ok,
* < 0 errno code on error.
*
* Arms the NE handle, issues the command to the device and checks the
* basics of the reply event.
*/
static
int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size)
{
int result;
struct device *dev = i1480->dev;
struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480);
struct usb_endpoint_descriptor *epd;
struct uwb_rccb *cmd = i1480->cmd_buf;
u8 iface_no;
/* Post a read on the notification & event endpoint */
iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber;
epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc;
usb_fill_int_urb(
i1480_usb->neep_urb, i1480_usb->usb_dev,
usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress),
i1480->evt_buf, i1480->buf_size,
i1480_usb_neep_cb, i1480, epd->bInterval);
result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL);
if (result < 0) {
dev_err(dev, "%s: cannot submit NEEP read: %d\n",
cmd_name, result);
goto error_submit_ep1;
}
/* Now post the command on EP0 */
result = usb_control_msg(
i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0),
WA_EXEC_RC_CMD,
USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS,
0, iface_no,
cmd, cmd_size,
100 /* FIXME: this is totally arbitrary */);
if (result < 0) {
dev_err(dev, "%s: control request failed: %d\n",
cmd_name, result);
goto error_submit_ep0;
}
return result;
error_submit_ep0:
usb_kill_urb(i1480_usb->neep_urb);
error_submit_ep1:
return result;
}
/*
* Probe a i1480 device for uploading firmware.
*
* We attach only to interface #0, which is the radio control interface.
*/
static
int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(iface);
struct i1480_usb *i1480_usb;
struct i1480 *i1480;
struct device *dev = &iface->dev;
int result;
result = -ENODEV;
if (iface->cur_altsetting->desc.bInterfaceNumber != 0) {
dev_dbg(dev, "not attaching to iface %d\n",
iface->cur_altsetting->desc.bInterfaceNumber);
goto error;
}
if (iface->num_altsetting > 1 &&
le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) {
/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
if (result < 0)
dev_warn(dev,
"can't set altsetting 1 on iface 0: %d\n",
result);
}
if (iface->cur_altsetting->desc.bNumEndpoints < 1)
return -ENODEV;
result = -ENOMEM;
i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL);
if (i1480_usb == NULL) {
dev_err(dev, "Unable to allocate instance\n");
goto error;
}
i1480_usb_init(i1480_usb);
i1480 = &i1480_usb->i1480;
i1480->buf_size = 512;
i1480->cmd_buf = kmalloc_array(2, i1480->buf_size, GFP_KERNEL);
if (i1480->cmd_buf == NULL) {
dev_err(dev, "Cannot allocate transfer buffers\n");
result = -ENOMEM;
goto error_buf_alloc;
}
i1480->evt_buf = i1480->cmd_buf + i1480->buf_size;
result = i1480_usb_create(i1480_usb, iface);
if (result < 0) {
dev_err(dev, "Cannot create instance: %d\n", result);
goto error_create;
}
/* setup the fops and upload the firmware */
i1480->pre_fw_name = "i1480-pre-phy-0.0.bin";
i1480->mac_fw_name = "i1480-usb-0.0.bin";
i1480->mac_fw_name_deprecate = "ptc-0.0.bin";
i1480->phy_fw_name = "i1480-phy-0.0.bin";
i1480->dev = &iface->dev;
i1480->write = i1480_usb_write;
i1480->read = i1480_usb_read;
i1480->rc_setup = NULL;
i1480->wait_init_done = i1480_usb_wait_init_done;
i1480->cmd = i1480_usb_cmd;
result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */
if (result >= 0) {
usb_reset_device(i1480_usb->usb_dev);
result = -ENODEV; /* we don't want to bind to the iface */
}
i1480_usb_destroy(i1480_usb);
error_create:
kfree(i1480->cmd_buf);
error_buf_alloc:
kfree(i1480_usb);
error:
return result;
}
MODULE_FIRMWARE("i1480-pre-phy-0.0.bin");
MODULE_FIRMWARE("i1480-usb-0.0.bin");
MODULE_FIRMWARE("i1480-phy-0.0.bin");
#define i1480_USB_DEV(v, p) \
{ \
.match_flags = USB_DEVICE_ID_MATCH_DEVICE \
| USB_DEVICE_ID_MATCH_DEV_INFO \
| USB_DEVICE_ID_MATCH_INT_INFO, \
.idVendor = (v), \
.idProduct = (p), \
.bDeviceClass = 0xff, \
.bDeviceSubClass = 0xff, \
.bDeviceProtocol = 0xff, \
.bInterfaceClass = 0xff, \
.bInterfaceSubClass = 0xff, \
.bInterfaceProtocol = 0xff, \
}
/** USB device ID's that we handle */
static const struct usb_device_id i1480_usb_id_table[] = {
i1480_USB_DEV(0x8086, 0xdf3b),
i1480_USB_DEV(0x15a9, 0x0005),
i1480_USB_DEV(0x07d1, 0x3802),
i1480_USB_DEV(0x050d, 0x305a),
i1480_USB_DEV(0x3495, 0x3007),
{},
};
MODULE_DEVICE_TABLE(usb, i1480_usb_id_table);
static struct usb_driver i1480_dfu_driver = {
.name = "i1480-dfu-usb",
.id_table = i1480_usb_id_table,
.probe = i1480_usb_probe,
.disconnect = NULL,
};
module_usb_driver(i1480_dfu_driver);
MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>");
MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB");
MODULE_LICENSE("GPL");