blob: 2e2d45bc850d88715a0917939b2f23a5252118bb [file] [log] [blame]
/***********************license start***************
* Author: Cavium Networks
*
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
* Copyright (c) 2003-2008 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this file; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
* or visit http://www.gnu.org/licenses/.
*
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
***********************license end**************************************/
/*
*
* Helper functions to abstract board specific data about
* network ports from the rest of the cvmx-helper files.
*/
#include <linux/bug.h>
#include <asm/octeon/octeon.h>
#include <asm/octeon/cvmx-bootinfo.h>
#include <asm/octeon/cvmx-config.h>
#include <asm/octeon/cvmx-helper.h>
#include <asm/octeon/cvmx-helper-util.h>
#include <asm/octeon/cvmx-helper-board.h>
#include <asm/octeon/cvmx-gmxx-defs.h>
#include <asm/octeon/cvmx-asxx-defs.h>
/**
* Return the MII PHY address associated with the given IPD
* port. A result of -1 means there isn't a MII capable PHY
* connected to this port. On chips supporting multiple MII
* busses the bus number is encoded in bits <15:8>.
*
* This function must be modified for every new Octeon board.
* Internally it uses switch statements based on the cvmx_sysinfo
* data to determine board types and revisions. It replies on the
* fact that every Octeon board receives a unique board type
* enumeration from the bootloader.
*
* @ipd_port: Octeon IPD port to get the MII address for.
*
* Returns MII PHY address and bus number or -1.
*/
int cvmx_helper_board_get_mii_address(int ipd_port)
{
switch (cvmx_sysinfo_get()->board_type) {
case CVMX_BOARD_TYPE_SIM:
/* Simulator doesn't have MII */
return -1;
case CVMX_BOARD_TYPE_EBT3000:
case CVMX_BOARD_TYPE_EBT5800:
case CVMX_BOARD_TYPE_THUNDER:
case CVMX_BOARD_TYPE_NICPRO2:
/* Interface 0 is SPI4, interface 1 is RGMII */
if ((ipd_port >= 16) && (ipd_port < 20))
return ipd_port - 16;
else
return -1;
case CVMX_BOARD_TYPE_KODAMA:
case CVMX_BOARD_TYPE_EBH3100:
case CVMX_BOARD_TYPE_HIKARI:
case CVMX_BOARD_TYPE_CN3010_EVB_HS5:
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
case CVMX_BOARD_TYPE_CN3020_EVB_HS5:
/*
* Port 0 is WAN connected to a PHY, Port 1 is GMII
* connected to a switch
*/
if (ipd_port == 0)
return 4;
else if (ipd_port == 1)
return 9;
else
return -1;
case CVMX_BOARD_TYPE_NAC38:
/* Board has 8 RGMII ports PHYs are 0-7 */
if ((ipd_port >= 0) && (ipd_port < 4))
return ipd_port;
else if ((ipd_port >= 16) && (ipd_port < 20))
return ipd_port - 16 + 4;
else
return -1;
case CVMX_BOARD_TYPE_EBH3000:
/* Board has dual SPI4 and no PHYs */
return -1;
case CVMX_BOARD_TYPE_EBH5200:
case CVMX_BOARD_TYPE_EBH5201:
case CVMX_BOARD_TYPE_EBT5200:
/* Board has 2 management ports */
if ((ipd_port >= CVMX_HELPER_BOARD_MGMT_IPD_PORT) &&
(ipd_port < (CVMX_HELPER_BOARD_MGMT_IPD_PORT + 2)))
return ipd_port - CVMX_HELPER_BOARD_MGMT_IPD_PORT;
/*
* Board has 4 SGMII ports. The PHYs start right after the MII
* ports MII0 = 0, MII1 = 1, SGMII = 2-5.
*/
if ((ipd_port >= 0) && (ipd_port < 4))
return ipd_port + 2;
else
return -1;
case CVMX_BOARD_TYPE_EBH5600:
case CVMX_BOARD_TYPE_EBH5601:
case CVMX_BOARD_TYPE_EBH5610:
/* Board has 1 management port */
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
return 0;
/*
* Board has 8 SGMII ports. 4 connect out, two connect
* to a switch, and 2 loop to each other
*/
if ((ipd_port >= 0) && (ipd_port < 4))
return ipd_port + 1;
else
return -1;
case CVMX_BOARD_TYPE_CUST_NB5:
if (ipd_port == 2)
return 4;
else
return -1;
case CVMX_BOARD_TYPE_NIC_XLE_4G:
/* Board has 4 SGMII ports. connected QLM3(interface 1) */
if ((ipd_port >= 16) && (ipd_port < 20))
return ipd_port - 16 + 1;
else
return -1;
case CVMX_BOARD_TYPE_NIC_XLE_10G:
case CVMX_BOARD_TYPE_NIC10E:
return -1;
case CVMX_BOARD_TYPE_NIC4E:
if (ipd_port >= 0 && ipd_port <= 3)
return (ipd_port + 0x1f) & 0x1f;
else
return -1;
case CVMX_BOARD_TYPE_NIC2E:
if (ipd_port >= 0 && ipd_port <= 1)
return ipd_port + 1;
else
return -1;
case CVMX_BOARD_TYPE_BBGW_REF:
/*
* No PHYs are connected to Octeon, everything is
* through switch.
*/
return -1;
case CVMX_BOARD_TYPE_CUST_WSX16:
if (ipd_port >= 0 && ipd_port <= 3)
return ipd_port;
else if (ipd_port >= 16 && ipd_port <= 19)
return ipd_port - 16 + 4;
else
return -1;
case CVMX_BOARD_TYPE_UBNT_E100:
if (ipd_port >= 0 && ipd_port <= 2)
return 7 - ipd_port;
else
return -1;
case CVMX_BOARD_TYPE_KONTRON_S1901:
if (ipd_port == CVMX_HELPER_BOARD_MGMT_IPD_PORT)
return 1;
else
return -1;
}
/* Some unknown board. Somebody forgot to update this function... */
cvmx_dprintf
("cvmx_helper_board_get_mii_address: Unknown board type %d\n",
cvmx_sysinfo_get()->board_type);
return -1;
}
/**
* This function is the board specific method of determining an
* ethernet ports link speed. Most Octeon boards have Marvell PHYs
* and are handled by the fall through case. This function must be
* updated for boards that don't have the normal Marvell PHYs.
*
* This function must be modified for every new Octeon board.
* Internally it uses switch statements based on the cvmx_sysinfo
* data to determine board types and revisions. It relies on the
* fact that every Octeon board receives a unique board type
* enumeration from the bootloader.
*
* @ipd_port: IPD input port associated with the port we want to get link
* status for.
*
* Returns The ports link status. If the link isn't fully resolved, this must
* return zero.
*/
cvmx_helper_link_info_t __cvmx_helper_board_link_get(int ipd_port)
{
cvmx_helper_link_info_t result;
WARN(!octeon_is_simulation(),
"Using deprecated link status - please update your DT");
/* Unless we fix it later, all links are defaulted to down */
result.u64 = 0;
if (octeon_is_simulation()) {
/* The simulator gives you a simulated 1Gbps full duplex link */
result.s.link_up = 1;
result.s.full_duplex = 1;
result.s.speed = 1000;
return result;
}
if (OCTEON_IS_MODEL(OCTEON_CN3XXX)
|| OCTEON_IS_MODEL(OCTEON_CN58XX)
|| OCTEON_IS_MODEL(OCTEON_CN50XX)) {
/*
* We don't have a PHY address, so attempt to use
* in-band status. It is really important that boards
* not supporting in-band status never get
* here. Reading broken in-band status tends to do bad
* things
*/
union cvmx_gmxx_rxx_rx_inbnd inband_status;
int interface = cvmx_helper_get_interface_num(ipd_port);
int index = cvmx_helper_get_interface_index_num(ipd_port);
inband_status.u64 =
cvmx_read_csr(CVMX_GMXX_RXX_RX_INBND(index, interface));
result.s.link_up = inband_status.s.status;
result.s.full_duplex = inband_status.s.duplex;
switch (inband_status.s.speed) {
case 0: /* 10 Mbps */
result.s.speed = 10;
break;
case 1: /* 100 Mbps */
result.s.speed = 100;
break;
case 2: /* 1 Gbps */
result.s.speed = 1000;
break;
case 3: /* Illegal */
result.u64 = 0;
break;
}
} else {
/*
* We don't have a PHY address and we don't have
* in-band status. There is no way to determine the
* link speed. Return down assuming this port isn't
* wired
*/
result.u64 = 0;
}
/* If link is down, return all fields as zero. */
if (!result.s.link_up)
result.u64 = 0;
return result;
}
/**
* This function is called by cvmx_helper_interface_probe() after it
* determines the number of ports Octeon can support on a specific
* interface. This function is the per board location to override
* this value. It is called with the number of ports Octeon might
* support and should return the number of actual ports on the
* board.
*
* This function must be modifed for every new Octeon board.
* Internally it uses switch statements based on the cvmx_sysinfo
* data to determine board types and revisions. It relys on the
* fact that every Octeon board receives a unique board type
* enumeration from the bootloader.
*
* @interface: Interface to probe
* @supported_ports:
* Number of ports Octeon supports.
*
* Returns Number of ports the actual board supports. Many times this will
* simple be "support_ports".
*/
int __cvmx_helper_board_interface_probe(int interface, int supported_ports)
{
switch (cvmx_sysinfo_get()->board_type) {
case CVMX_BOARD_TYPE_CN3005_EVB_HS5:
if (interface == 0)
return 2;
break;
case CVMX_BOARD_TYPE_BBGW_REF:
if (interface == 0)
return 2;
break;
case CVMX_BOARD_TYPE_NIC_XLE_4G:
if (interface == 0)
return 0;
break;
/* The 2nd interface on the EBH5600 is connected to the Marvel switch,
which we don't support. Disable ports connected to it */
case CVMX_BOARD_TYPE_EBH5600:
if (interface == 1)
return 0;
break;
}
return supported_ports;
}
/**
* Get the clock type used for the USB block based on board type.
* Used by the USB code for auto configuration of clock type.
*
* Return USB clock type enumeration
*/
enum cvmx_helper_board_usb_clock_types __cvmx_helper_board_usb_get_clock_type(void)
{
switch (cvmx_sysinfo_get()->board_type) {
case CVMX_BOARD_TYPE_BBGW_REF:
case CVMX_BOARD_TYPE_LANAI2_A:
case CVMX_BOARD_TYPE_LANAI2_U:
case CVMX_BOARD_TYPE_LANAI2_G:
case CVMX_BOARD_TYPE_NIC10E_66:
case CVMX_BOARD_TYPE_UBNT_E100:
return USB_CLOCK_TYPE_CRYSTAL_12;
case CVMX_BOARD_TYPE_NIC10E:
return USB_CLOCK_TYPE_REF_12;
default:
break;
}
/* Most boards except NIC10e use a 12MHz crystal */
if (OCTEON_IS_OCTEON2())
return USB_CLOCK_TYPE_CRYSTAL_12;
return USB_CLOCK_TYPE_REF_48;
}