blob: 149883c8f0b8c8347864ebac8eec78040d10802f [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/* Copyright 2019 NXP */
#include <linux/mdio.h>
#include <linux/of_mdio.h>
#include <linux/iopoll.h>
#include <linux/of.h>
#include "enetc_mdio.h"
#define ENETC_MDIO_REG_OFFSET 0x1c00
#define ENETC_MDIO_CFG 0x0 /* MDIO configuration and status */
#define ENETC_MDIO_CTL 0x4 /* MDIO control */
#define ENETC_MDIO_DATA 0x8 /* MDIO data */
#define ENETC_MDIO_ADDR 0xc /* MDIO address */
#define enetc_mdio_rd(hw, off) \
enetc_port_rd(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET)
#define enetc_mdio_wr(hw, off, val) \
enetc_port_wr(hw, ENETC_##off + ENETC_MDIO_REG_OFFSET, val)
#define enetc_mdio_rd_reg(off) enetc_mdio_rd(hw, off)
#define ENETC_MDC_DIV 258
#define MDIO_CFG_CLKDIV(x) ((((x) >> 1) & 0xff) << 8)
#define MDIO_CFG_BSY BIT(0)
#define MDIO_CFG_RD_ER BIT(1)
#define MDIO_CFG_ENC45 BIT(6)
/* external MDIO only - driven on neg MDC edge */
#define MDIO_CFG_NEG BIT(23)
#define MDIO_CTL_DEV_ADDR(x) ((x) & 0x1f)
#define MDIO_CTL_PORT_ADDR(x) (((x) & 0x1f) << 5)
#define MDIO_CTL_READ BIT(15)
#define MDIO_DATA(x) ((x) & 0xffff)
#define TIMEOUT 1000
static int enetc_mdio_wait_complete(struct enetc_hw *hw)
{
u32 val;
return readx_poll_timeout(enetc_mdio_rd_reg, MDIO_CFG, val,
!(val & MDIO_CFG_BSY), 10, 10 * TIMEOUT);
}
int enetc_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 value)
{
struct enetc_mdio_priv *mdio_priv = bus->priv;
struct enetc_hw *hw = mdio_priv->hw;
u32 mdio_ctl, mdio_cfg;
u16 dev_addr;
int ret;
mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
if (regnum & MII_ADDR_C45) {
dev_addr = (regnum >> 16) & 0x1f;
mdio_cfg |= MDIO_CFG_ENC45;
} else {
/* clause 22 (ie 1G) */
dev_addr = regnum & 0x1f;
mdio_cfg &= ~MDIO_CFG_ENC45;
}
enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg);
ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
/* set port and dev addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl);
/* set the register address */
if (regnum & MII_ADDR_C45) {
enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff);
ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
}
/* write the value */
enetc_mdio_wr(hw, MDIO_DATA, MDIO_DATA(value));
ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
return 0;
}
int enetc_mdio_read(struct mii_bus *bus, int phy_id, int regnum)
{
struct enetc_mdio_priv *mdio_priv = bus->priv;
struct enetc_hw *hw = mdio_priv->hw;
u32 mdio_ctl, mdio_cfg;
u16 dev_addr, value;
int ret;
mdio_cfg = MDIO_CFG_CLKDIV(ENETC_MDC_DIV) | MDIO_CFG_NEG;
if (regnum & MII_ADDR_C45) {
dev_addr = (regnum >> 16) & 0x1f;
mdio_cfg |= MDIO_CFG_ENC45;
} else {
dev_addr = regnum & 0x1f;
mdio_cfg &= ~MDIO_CFG_ENC45;
}
enetc_mdio_wr(hw, MDIO_CFG, mdio_cfg);
ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
/* set port and device addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr);
enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl);
/* set the register address */
if (regnum & MII_ADDR_C45) {
enetc_mdio_wr(hw, MDIO_ADDR, regnum & 0xffff);
ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
}
/* initiate the read */
enetc_mdio_wr(hw, MDIO_CTL, mdio_ctl | MDIO_CTL_READ);
ret = enetc_mdio_wait_complete(hw);
if (ret)
return ret;
/* return all Fs if nothing was there */
if (enetc_mdio_rd(hw, MDIO_CFG) & MDIO_CFG_RD_ER) {
dev_dbg(&bus->dev,
"Error while reading PHY%d reg at %d.%hhu\n",
phy_id, dev_addr, regnum);
return 0xffff;
}
value = enetc_mdio_rd(hw, MDIO_DATA) & 0xffff;
return value;
}
int enetc_mdio_probe(struct enetc_pf *pf)
{
struct device *dev = &pf->si->pdev->dev;
struct enetc_mdio_priv *mdio_priv;
struct device_node *np;
struct mii_bus *bus;
int err;
bus = devm_mdiobus_alloc_size(dev, sizeof(*mdio_priv));
if (!bus)
return -ENOMEM;
bus->name = "Freescale ENETC MDIO Bus";
bus->read = enetc_mdio_read;
bus->write = enetc_mdio_write;
bus->parent = dev;
mdio_priv = bus->priv;
mdio_priv->hw = &pf->si->hw;
snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev));
np = of_get_child_by_name(dev->of_node, "mdio");
if (!np) {
dev_err(dev, "MDIO node missing\n");
return -EINVAL;
}
err = of_mdiobus_register(bus, np);
if (err) {
of_node_put(np);
dev_err(dev, "cannot register MDIO bus\n");
return err;
}
of_node_put(np);
pf->mdio = bus;
return 0;
}
void enetc_mdio_remove(struct enetc_pf *pf)
{
if (pf->mdio)
mdiobus_unregister(pf->mdio);
}