blob: 7afaf35f24533978c503fe9df0cb5003b5481811 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0-only
/*
* This file is part of wl1271
*
* Copyright (C) 2009-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*/
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
#include <linux/platform_device.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
#include <linux/gpio.h>
#include <linux/pm_runtime.h>
#include <linux/printk.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include "wlcore.h"
#include "wl12xx_80211.h"
#include "io.h"
#ifndef SDIO_VENDOR_ID_TI
#define SDIO_VENDOR_ID_TI 0x0097
#endif
#ifndef SDIO_DEVICE_ID_TI_WL1271
#define SDIO_DEVICE_ID_TI_WL1271 0x4076
#endif
static bool dump = false;
struct wl12xx_sdio_glue {
struct device *dev;
struct platform_device *core;
};
static const struct sdio_device_id wl1271_devices[] = {
{ SDIO_DEVICE(SDIO_VENDOR_ID_TI, SDIO_DEVICE_ID_TI_WL1271) },
{}
};
MODULE_DEVICE_TABLE(sdio, wl1271_devices);
static void wl1271_sdio_set_block_size(struct device *child,
unsigned int blksz)
{
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
struct sdio_func *func = dev_to_sdio_func(glue->dev);
sdio_claim_host(func);
sdio_set_block_size(func, blksz);
sdio_release_host(func);
}
static int __must_check wl12xx_sdio_raw_read(struct device *child, int addr,
void *buf, size_t len, bool fixed)
{
int ret;
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
struct sdio_func *func = dev_to_sdio_func(glue->dev);
sdio_claim_host(func);
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
((u8 *)buf)[0] = sdio_f0_readb(func, addr, &ret);
dev_dbg(child->parent, "sdio read 52 addr 0x%x, byte 0x%02x\n",
addr, ((u8 *)buf)[0]);
} else {
if (fixed)
ret = sdio_readsb(func, buf, addr, len);
else
ret = sdio_memcpy_fromio(func, buf, addr, len);
dev_dbg(child->parent, "sdio read 53 addr 0x%x, %zu bytes\n",
addr, len);
}
sdio_release_host(func);
if (WARN_ON(ret))
dev_err(child->parent, "sdio read failed (%d)\n", ret);
if (unlikely(dump)) {
printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr);
print_hex_dump(KERN_DEBUG, "wlcore_sdio: READ ",
DUMP_PREFIX_OFFSET, 16, 1,
buf, len, false);
}
return ret;
}
static int __must_check wl12xx_sdio_raw_write(struct device *child, int addr,
void *buf, size_t len, bool fixed)
{
int ret;
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
struct sdio_func *func = dev_to_sdio_func(glue->dev);
sdio_claim_host(func);
if (unlikely(dump)) {
printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr);
print_hex_dump(KERN_DEBUG, "wlcore_sdio: WRITE ",
DUMP_PREFIX_OFFSET, 16, 1,
buf, len, false);
}
if (unlikely(addr == HW_ACCESS_ELP_CTRL_REG)) {
sdio_f0_writeb(func, ((u8 *)buf)[0], addr, &ret);
dev_dbg(child->parent, "sdio write 52 addr 0x%x, byte 0x%02x\n",
addr, ((u8 *)buf)[0]);
} else {
dev_dbg(child->parent, "sdio write 53 addr 0x%x, %zu bytes\n",
addr, len);
if (fixed)
ret = sdio_writesb(func, addr, buf, len);
else
ret = sdio_memcpy_toio(func, addr, buf, len);
}
sdio_release_host(func);
if (WARN_ON(ret))
dev_err(child->parent, "sdio write failed (%d)\n", ret);
return ret;
}
static int wl12xx_sdio_power_on(struct wl12xx_sdio_glue *glue)
{
int ret;
struct sdio_func *func = dev_to_sdio_func(glue->dev);
struct mmc_card *card = func->card;
ret = pm_runtime_get_sync(&card->dev);
if (ret < 0) {
pm_runtime_put_noidle(&card->dev);
dev_err(glue->dev, "%s: failed to get_sync(%d)\n",
__func__, ret);
return ret;
}
sdio_claim_host(func);
/*
* To guarantee that the SDIO card is power cycled, as required to make
* the FW programming to succeed, let's do a brute force HW reset.
*/
mmc_hw_reset(card->host);
sdio_enable_func(func);
sdio_release_host(func);
return 0;
}
static int wl12xx_sdio_power_off(struct wl12xx_sdio_glue *glue)
{
struct sdio_func *func = dev_to_sdio_func(glue->dev);
struct mmc_card *card = func->card;
sdio_claim_host(func);
sdio_disable_func(func);
sdio_release_host(func);
/* Let runtime PM know the card is powered off */
pm_runtime_put(&card->dev);
return 0;
}
static int wl12xx_sdio_set_power(struct device *child, bool enable)
{
struct wl12xx_sdio_glue *glue = dev_get_drvdata(child->parent);
if (enable)
return wl12xx_sdio_power_on(glue);
else
return wl12xx_sdio_power_off(glue);
}
static struct wl1271_if_operations sdio_ops = {
.read = wl12xx_sdio_raw_read,
.write = wl12xx_sdio_raw_write,
.power = wl12xx_sdio_set_power,
.set_block_size = wl1271_sdio_set_block_size,
};
#ifdef CONFIG_OF
static const struct wilink_family_data wl127x_data = {
.name = "wl127x",
.nvs_name = "ti-connectivity/wl127x-nvs.bin",
};
static const struct wilink_family_data wl128x_data = {
.name = "wl128x",
.nvs_name = "ti-connectivity/wl128x-nvs.bin",
};
static const struct wilink_family_data wl18xx_data = {
.name = "wl18xx",
.cfg_name = "ti-connectivity/wl18xx-conf.bin",
.nvs_name = "ti-connectivity/wl1271-nvs.bin",
};
static const struct of_device_id wlcore_sdio_of_match_table[] = {
{ .compatible = "ti,wl1271", .data = &wl127x_data },
{ .compatible = "ti,wl1273", .data = &wl127x_data },
{ .compatible = "ti,wl1281", .data = &wl128x_data },
{ .compatible = "ti,wl1283", .data = &wl128x_data },
{ .compatible = "ti,wl1285", .data = &wl128x_data },
{ .compatible = "ti,wl1801", .data = &wl18xx_data },
{ .compatible = "ti,wl1805", .data = &wl18xx_data },
{ .compatible = "ti,wl1807", .data = &wl18xx_data },
{ .compatible = "ti,wl1831", .data = &wl18xx_data },
{ .compatible = "ti,wl1835", .data = &wl18xx_data },
{ .compatible = "ti,wl1837", .data = &wl18xx_data },
{ }
};
static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq,
struct wlcore_platdev_data *pdev_data)
{
struct device_node *np = dev->of_node;
const struct of_device_id *of_id;
of_id = of_match_node(wlcore_sdio_of_match_table, np);
if (!of_id)
return -ENODEV;
pdev_data->family = of_id->data;
*irq = irq_of_parse_and_map(np, 0);
if (!*irq) {
dev_err(dev, "No irq in platform data\n");
return -EINVAL;
}
*wakeirq = irq_of_parse_and_map(np, 1);
/* optional clock frequency params */
of_property_read_u32(np, "ref-clock-frequency",
&pdev_data->ref_clock_freq);
of_property_read_u32(np, "tcxo-clock-frequency",
&pdev_data->tcxo_clock_freq);
return 0;
}
#else
static int wlcore_probe_of(struct device *dev, int *irq, int *wakeirq,
struct wlcore_platdev_data *pdev_data)
{
return -ENODATA;
}
#endif
static int wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
struct wlcore_platdev_data *pdev_data;
struct wl12xx_sdio_glue *glue;
struct resource res[2];
mmc_pm_flag_t mmcflags;
int ret = -ENOMEM;
int irq, wakeirq, num_irqs;
const char *chip_family;
/* We are only able to handle the wlan function */
if (func->num != 0x02)
return -ENODEV;
pdev_data = devm_kzalloc(&func->dev, sizeof(*pdev_data), GFP_KERNEL);
if (!pdev_data)
return -ENOMEM;
pdev_data->if_ops = &sdio_ops;
glue = devm_kzalloc(&func->dev, sizeof(*glue), GFP_KERNEL);
if (!glue)
return -ENOMEM;
glue->dev = &func->dev;
/* Grab access to FN0 for ELP reg. */
func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
/* Use block mode for transferring over one block size of data */
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
ret = wlcore_probe_of(&func->dev, &irq, &wakeirq, pdev_data);
if (ret)
goto out;
/* if sdio can keep power while host is suspended, enable wow */
mmcflags = sdio_get_host_pm_caps(func);
dev_dbg(glue->dev, "sdio PM caps = 0x%x\n", mmcflags);
if (mmcflags & MMC_PM_KEEP_POWER)
pdev_data->pwr_in_suspend = true;
sdio_set_drvdata(func, glue);
/* Tell PM core that we don't need the card to be powered now */
pm_runtime_put_noidle(&func->dev);
/*
* Due to a hardware bug, we can't differentiate wl18xx from
* wl12xx, because both report the same device ID. The only
* way to differentiate is by checking the SDIO revision,
* which is 3.00 on the wl18xx chips.
*/
if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00)
chip_family = "wl18xx";
else
chip_family = "wl12xx";
glue->core = platform_device_alloc(chip_family, PLATFORM_DEVID_AUTO);
if (!glue->core) {
dev_err(glue->dev, "can't allocate platform_device");
ret = -ENOMEM;
goto out;
}
glue->core->dev.parent = &func->dev;
memset(res, 0x00, sizeof(res));
res[0].start = irq;
res[0].flags = IORESOURCE_IRQ |
irqd_get_trigger_type(irq_get_irq_data(irq));
res[0].name = "irq";
if (wakeirq > 0) {
res[1].start = wakeirq;
res[1].flags = IORESOURCE_IRQ |
irqd_get_trigger_type(irq_get_irq_data(wakeirq));
res[1].name = "wakeirq";
num_irqs = 2;
} else {
num_irqs = 1;
}
ret = platform_device_add_resources(glue->core, res, num_irqs);
if (ret) {
dev_err(glue->dev, "can't add resources\n");
goto out_dev_put;
}
ret = platform_device_add_data(glue->core, pdev_data,
sizeof(*pdev_data));
if (ret) {
dev_err(glue->dev, "can't add platform data\n");
goto out_dev_put;
}
ret = platform_device_add(glue->core);
if (ret) {
dev_err(glue->dev, "can't add platform device\n");
goto out_dev_put;
}
return 0;
out_dev_put:
platform_device_put(glue->core);
out:
return ret;
}
static void wl1271_remove(struct sdio_func *func)
{
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
/* Undo decrement done above in wl1271_probe */
pm_runtime_get_noresume(&func->dev);
platform_device_unregister(glue->core);
}
#ifdef CONFIG_PM
static int wl1271_suspend(struct device *dev)
{
/* Tell MMC/SDIO core it's OK to power down the card
* (if it isn't already), but not to remove it completely */
struct sdio_func *func = dev_to_sdio_func(dev);
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
struct wl1271 *wl = platform_get_drvdata(glue->core);
mmc_pm_flag_t sdio_flags;
int ret = 0;
if (!wl) {
dev_err(dev, "no wilink module was probed\n");
goto out;
}
dev_dbg(dev, "wl1271 suspend. wow_enabled: %d\n",
wl->wow_enabled);
/* check whether sdio should keep power */
if (wl->wow_enabled) {
sdio_flags = sdio_get_host_pm_caps(func);
if (!(sdio_flags & MMC_PM_KEEP_POWER)) {
dev_err(dev, "can't keep power while host "
"is suspended\n");
ret = -EINVAL;
goto out;
}
/* keep power while host suspended */
ret = sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
if (ret) {
dev_err(dev, "error while trying to keep power\n");
goto out;
}
}
out:
return ret;
}
static int wl1271_resume(struct device *dev)
{
dev_dbg(dev, "wl1271 resume\n");
return 0;
}
static const struct dev_pm_ops wl1271_sdio_pm_ops = {
.suspend = wl1271_suspend,
.resume = wl1271_resume,
};
#endif
static struct sdio_driver wl1271_sdio_driver = {
.name = "wl1271_sdio",
.id_table = wl1271_devices,
.probe = wl1271_probe,
.remove = wl1271_remove,
#ifdef CONFIG_PM
.drv = {
.pm = &wl1271_sdio_pm_ops,
},
#endif
};
static int __init wl1271_init(void)
{
return sdio_register_driver(&wl1271_sdio_driver);
}
static void __exit wl1271_exit(void)
{
sdio_unregister_driver(&wl1271_sdio_driver);
}
module_init(wl1271_init);
module_exit(wl1271_exit);
module_param(dump, bool, 0600);
MODULE_PARM_DESC(dump, "Enable sdio read/write dumps.");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");