| # SPDX-License-Identifier: GPL-2.0 |
| # |
| # USB Gadget support on a system involves |
| # (a) a peripheral controller, and |
| # (b) the gadget driver using it. |
| # |
| # NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !! |
| # |
| # - Host systems (like PCs) need CONFIG_USB (with "A" jacks). |
| # - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks). |
| # - Some systems have both kinds of controllers. |
| # |
| # With help from a special transceiver and a "Mini-AB" jack, systems with |
| # both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG). |
| # |
| |
| config USB_ZERO |
| tristate "Gadget Zero (DEVELOPMENT)" |
| select USB_LIBCOMPOSITE |
| select USB_F_SS_LB |
| help |
| Gadget Zero is a two-configuration device. It either sinks and |
| sources bulk data; or it loops back a configurable number of |
| transfers. It also implements control requests, for "chapter 9" |
| conformance. The driver needs only two bulk-capable endpoints, so |
| it can work on top of most device-side usb controllers. It's |
| useful for testing, and is also a working example showing how |
| USB "gadget drivers" can be written. |
| |
| Make this be the first driver you try using on top of any new |
| USB peripheral controller driver. Then you can use host-side |
| test software, like the "usbtest" driver, to put your hardware |
| and its driver through a basic set of functional tests. |
| |
| Gadget Zero also works with the host-side "usb-skeleton" driver, |
| and with many kinds of host-side test software. You may need |
| to tweak product and vendor IDs before host software knows about |
| this device, and arrange to select an appropriate configuration. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_zero". |
| |
| config USB_ZERO_HNPTEST |
| bool "HNP Test Device" |
| depends on USB_ZERO && USB_OTG |
| help |
| You can configure this device to enumerate using the device |
| identifiers of the USB-OTG test device. That means that when |
| this gadget connects to another OTG device, with this one using |
| the "B-Peripheral" role, that device will use HNP to let this |
| one serve as the USB host instead (in the "B-Host" role). |
| |
| config USB_AUDIO |
| tristate "Audio Gadget" |
| depends on SND |
| select USB_LIBCOMPOSITE |
| select SND_PCM |
| select USB_F_UAC1 if (GADGET_UAC1 && !GADGET_UAC1_LEGACY) |
| select USB_F_UAC1_LEGACY if (GADGET_UAC1 && GADGET_UAC1_LEGACY) |
| select USB_F_UAC2 if !GADGET_UAC1 |
| select USB_U_AUDIO if (USB_F_UAC2 || USB_F_UAC1) |
| help |
| This Gadget Audio driver is compatible with USB Audio Class |
| specification 2.0. It implements 1 AudioControl interface, |
| 1 AudioStreaming Interface each for USB-OUT and USB-IN. |
| Number of channels, sample rate and sample size can be |
| specified as module parameters. |
| This driver doesn't expect any real Audio codec to be present |
| on the device - the audio streams are simply sinked to and |
| sourced from a virtual ALSA sound card created. The user-space |
| application may choose to do whatever it wants with the data |
| received from the USB Host and choose to provide whatever it |
| wants as audio data to the USB Host. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_audio". |
| |
| config GADGET_UAC1 |
| bool "UAC 1.0" |
| depends on USB_AUDIO |
| help |
| If you instead want older USB Audio Class specification 1.0 support |
| with similar driver capabilities. |
| |
| config GADGET_UAC1_LEGACY |
| bool "UAC 1.0 (Legacy)" |
| depends on GADGET_UAC1 |
| help |
| If you instead want legacy UAC Spec-1.0 driver that also has audio |
| paths hardwired to the Audio codec chip on-board and doesn't work |
| without one. |
| |
| config USB_ETH |
| tristate "Ethernet Gadget (with CDC Ethernet support)" |
| depends on NET |
| select USB_LIBCOMPOSITE |
| select USB_U_ETHER |
| select USB_F_ECM |
| select USB_F_SUBSET |
| select CRC32 |
| help |
| This driver implements Ethernet style communication, in one of |
| several ways: |
| |
| - The "Communication Device Class" (CDC) Ethernet Control Model. |
| That protocol is often avoided with pure Ethernet adapters, in |
| favor of simpler vendor-specific hardware, but is widely |
| supported by firmware for smart network devices. |
| |
| - On hardware can't implement that protocol, a simple CDC subset |
| is used, placing fewer demands on USB. |
| |
| - CDC Ethernet Emulation Model (EEM) is a newer standard that has |
| a simpler interface that can be used by more USB hardware. |
| |
| RNDIS support is an additional option, more demanding than subset. |
| |
| Within the USB device, this gadget driver exposes a network device |
| "usbX", where X depends on what other networking devices you have. |
| Treat it like a two-node Ethernet link: host, and gadget. |
| |
| The Linux-USB host-side "usbnet" driver interoperates with this |
| driver, so that deep I/O queues can be supported. On 2.4 kernels, |
| use "CDCEther" instead, if you're using the CDC option. That CDC |
| mode should also interoperate with standard CDC Ethernet class |
| drivers on other host operating systems. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_ether". |
| |
| config USB_ETH_RNDIS |
| bool "RNDIS support" |
| depends on USB_ETH |
| select USB_LIBCOMPOSITE |
| select USB_F_RNDIS |
| default y |
| help |
| Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, |
| and Microsoft provides redistributable binary RNDIS drivers for |
| older versions of Windows. |
| |
| If you say "y" here, the Ethernet gadget driver will try to provide |
| a second device configuration, supporting RNDIS to talk to such |
| Microsoft USB hosts. |
| |
| To make MS-Windows work with this, use Documentation/usb/linux.inf |
| as the "driver info file". For versions of MS-Windows older than |
| XP, you'll need to download drivers from Microsoft's website; a URL |
| is given in comments found in that info file. |
| |
| config USB_ETH_EEM |
| bool "Ethernet Emulation Model (EEM) support" |
| depends on USB_ETH |
| select USB_LIBCOMPOSITE |
| select USB_F_EEM |
| help |
| CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM |
| and therefore can be supported by more hardware. Technically ECM and |
| EEM are designed for different applications. The ECM model extends |
| the network interface to the target (e.g. a USB cable modem), and the |
| EEM model is for mobile devices to communicate with hosts using |
| ethernet over USB. For Linux gadgets, however, the interface with |
| the host is the same (a usbX device), so the differences are minimal. |
| |
| If you say "y" here, the Ethernet gadget driver will use the EEM |
| protocol rather than ECM. If unsure, say "n". |
| |
| config USB_G_NCM |
| tristate "Network Control Model (NCM) support" |
| depends on NET |
| select USB_LIBCOMPOSITE |
| select USB_U_ETHER |
| select USB_F_NCM |
| select CRC32 |
| help |
| This driver implements USB CDC NCM subclass standard. NCM is |
| an advanced protocol for Ethernet encapsulation, allows grouping |
| of several ethernet frames into one USB transfer and different |
| alignment possibilities. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_ncm". |
| |
| config USB_GADGETFS |
| tristate "Gadget Filesystem" |
| help |
| This driver provides a filesystem based API that lets user mode |
| programs implement a single-configuration USB device, including |
| endpoint I/O and control requests that don't relate to enumeration. |
| All endpoints, transfer speeds, and transfer types supported by |
| the hardware are available, through read() and write() calls. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "gadgetfs". |
| |
| config USB_FUNCTIONFS |
| tristate "Function Filesystem" |
| select USB_LIBCOMPOSITE |
| select USB_F_FS |
| select USB_FUNCTIONFS_GENERIC if !(USB_FUNCTIONFS_ETH || USB_FUNCTIONFS_RNDIS) |
| help |
| The Function Filesystem (FunctionFS) lets one create USB |
| composite functions in user space in the same way GadgetFS |
| lets one create USB gadgets in user space. This allows creation |
| of composite gadgets such that some of the functions are |
| implemented in kernel space (for instance Ethernet, serial or |
| mass storage) and other are implemented in user space. |
| |
| If you say "y" or "m" here you will be able what kind of |
| configurations the gadget will provide. |
| |
| Say "y" to link the driver statically, or "m" to build |
| a dynamically linked module called "g_ffs". |
| |
| config USB_FUNCTIONFS_ETH |
| bool "Include configuration with CDC ECM (Ethernet)" |
| depends on USB_FUNCTIONFS && NET |
| select USB_U_ETHER |
| select USB_F_ECM |
| select USB_F_SUBSET |
| help |
| Include a configuration with CDC ECM function (Ethernet) and the |
| Function Filesystem. |
| |
| config USB_FUNCTIONFS_RNDIS |
| bool "Include configuration with RNDIS (Ethernet)" |
| depends on USB_FUNCTIONFS && NET |
| select USB_U_ETHER |
| select USB_F_RNDIS |
| help |
| Include a configuration with RNDIS function (Ethernet) and the Filesystem. |
| |
| config USB_FUNCTIONFS_GENERIC |
| bool "Include 'pure' configuration" |
| depends on USB_FUNCTIONFS |
| help |
| Include a configuration with the Function Filesystem alone with |
| no Ethernet interface. |
| |
| config USB_MASS_STORAGE |
| tristate "Mass Storage Gadget" |
| depends on BLOCK |
| select USB_LIBCOMPOSITE |
| select USB_F_MASS_STORAGE |
| help |
| The Mass Storage Gadget acts as a USB Mass Storage disk drive. |
| As its storage repository it can use a regular file or a block |
| device (in much the same way as the "loop" device driver), |
| specified as a module parameter or sysfs option. |
| |
| This driver is a replacement for now removed File-backed |
| Storage Gadget (g_file_storage). |
| |
| Say "y" to link the driver statically, or "m" to build |
| a dynamically linked module called "g_mass_storage". |
| |
| config USB_GADGET_TARGET |
| tristate "USB Gadget Target Fabric Module" |
| depends on TARGET_CORE |
| select USB_LIBCOMPOSITE |
| select USB_F_TCM |
| help |
| This fabric is an USB gadget. Two USB protocols are supported that is |
| BBB or BOT (Bulk Only Transport) and UAS (USB Attached SCSI). BOT is |
| advertised on alternative interface 0 (primary) and UAS is on |
| alternative interface 1. Both protocols can work on USB2.0 and USB3.0. |
| UAS utilizes the USB 3.0 feature called streams support. |
| |
| config USB_G_SERIAL |
| tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" |
| depends on TTY |
| select USB_U_SERIAL |
| select USB_F_ACM |
| select USB_F_SERIAL |
| select USB_F_OBEX |
| select USB_LIBCOMPOSITE |
| help |
| The Serial Gadget talks to the Linux-USB generic serial driver. |
| This driver supports a CDC-ACM module option, which can be used |
| to interoperate with MS-Windows hosts or with the Linux-USB |
| "cdc-acm" driver. |
| |
| This driver also supports a CDC-OBEX option. You will need a |
| user space OBEX server talking to /dev/ttyGS*, since the kernel |
| itself doesn't implement the OBEX protocol. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_serial". |
| |
| For more information, see Documentation/usb/gadget_serial.rst |
| which includes instructions and a "driver info file" needed to |
| make MS-Windows work with CDC ACM. |
| |
| config USB_MIDI_GADGET |
| tristate "MIDI Gadget" |
| depends on SND |
| select USB_LIBCOMPOSITE |
| select SND_RAWMIDI |
| select USB_F_MIDI |
| help |
| The MIDI Gadget acts as a USB Audio device, with one MIDI |
| input and one MIDI output. These MIDI jacks appear as |
| a sound "card" in the ALSA sound system. Other MIDI |
| connections can then be made on the gadget system, using |
| ALSA's aconnect utility etc. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_midi". |
| |
| config USB_G_PRINTER |
| tristate "Printer Gadget" |
| select USB_LIBCOMPOSITE |
| select USB_F_PRINTER |
| help |
| The Printer Gadget channels data between the USB host and a |
| userspace program driving the print engine. The user space |
| program reads and writes the device file /dev/g_printer to |
| receive or send printer data. It can use ioctl calls to |
| the device file to get or set printer status. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_printer". |
| |
| For more information, see Documentation/usb/gadget_printer.rst |
| which includes sample code for accessing the device file. |
| |
| if TTY |
| |
| config USB_CDC_COMPOSITE |
| tristate "CDC Composite Device (Ethernet and ACM)" |
| depends on NET |
| select USB_LIBCOMPOSITE |
| select USB_U_SERIAL |
| select USB_U_ETHER |
| select USB_F_ACM |
| select USB_F_ECM |
| help |
| This driver provides two functions in one configuration: |
| a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. |
| |
| This driver requires four bulk and two interrupt endpoints, |
| plus the ability to handle altsettings. Not all peripheral |
| controllers are that capable. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module. |
| |
| config USB_G_NOKIA |
| tristate "Nokia composite gadget" |
| depends on PHONET |
| depends on BLOCK |
| select USB_LIBCOMPOSITE |
| select USB_U_SERIAL |
| select USB_U_ETHER |
| select USB_F_ACM |
| select USB_F_OBEX |
| select USB_F_PHONET |
| select USB_F_ECM |
| select USB_F_MASS_STORAGE |
| help |
| The Nokia composite gadget provides support for acm, obex |
| and phonet in only one composite gadget driver. |
| |
| It's only really useful for N900 hardware. If you're building |
| a kernel for N900, say Y or M here. If unsure, say N. |
| |
| config USB_G_ACM_MS |
| tristate "CDC Composite Device (ACM and mass storage)" |
| depends on BLOCK |
| select USB_LIBCOMPOSITE |
| select USB_U_SERIAL |
| select USB_F_ACM |
| select USB_F_MASS_STORAGE |
| help |
| This driver provides two functions in one configuration: |
| a mass storage, and a CDC ACM (serial port) link. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_acm_ms". |
| |
| config USB_G_MULTI |
| tristate "Multifunction Composite Gadget" |
| depends on BLOCK && NET |
| select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS |
| select USB_LIBCOMPOSITE |
| select USB_U_SERIAL |
| select USB_U_ETHER |
| select USB_F_ACM |
| select USB_F_MASS_STORAGE |
| help |
| The Multifunction Composite Gadget provides Ethernet (RNDIS |
| and/or CDC Ethernet), mass storage and ACM serial link |
| interfaces. |
| |
| You will be asked to choose which of the two configurations is |
| to be available in the gadget. At least one configuration must |
| be chosen to make the gadget usable. Selecting more than one |
| configuration will prevent Windows from automatically detecting |
| the gadget as a composite gadget, so an INF file will be needed to |
| use the gadget. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_multi". |
| |
| config USB_G_MULTI_RNDIS |
| bool "RNDIS + CDC Serial + Storage configuration" |
| depends on USB_G_MULTI |
| select USB_F_RNDIS |
| default y |
| help |
| This option enables a configuration with RNDIS, CDC Serial and |
| Mass Storage functions available in the Multifunction Composite |
| Gadget. This is the configuration dedicated for Windows since RNDIS |
| is Microsoft's protocol. |
| |
| If unsure, say "y". |
| |
| config USB_G_MULTI_CDC |
| bool "CDC Ethernet + CDC Serial + Storage configuration" |
| depends on USB_G_MULTI |
| select USB_F_ECM |
| help |
| This option enables a configuration with CDC Ethernet (ECM), CDC |
| Serial and Mass Storage functions available in the Multifunction |
| Composite Gadget. |
| |
| If unsure, say "y". |
| |
| endif # TTY |
| |
| config USB_G_HID |
| tristate "HID Gadget" |
| select USB_LIBCOMPOSITE |
| select USB_F_HID |
| help |
| The HID gadget driver provides generic emulation of USB |
| Human Interface Devices (HID). |
| |
| For more information, see Documentation/usb/gadget_hid.rst which |
| includes sample code for accessing the device files. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_hid". |
| |
| # Standalone / single function gadgets |
| config USB_G_DBGP |
| tristate "EHCI Debug Device Gadget" |
| depends on TTY |
| select USB_LIBCOMPOSITE |
| help |
| This gadget emulates an EHCI Debug device. This is useful when you want |
| to interact with an EHCI Debug Port. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_dbgp". |
| |
| if USB_G_DBGP |
| choice |
| prompt "EHCI Debug Device mode" |
| default USB_G_DBGP_SERIAL |
| |
| config USB_G_DBGP_PRINTK |
| depends on USB_G_DBGP |
| bool "printk" |
| help |
| Directly printk() received data. No interaction. |
| |
| config USB_G_DBGP_SERIAL |
| depends on USB_G_DBGP |
| select USB_U_SERIAL |
| bool "serial" |
| help |
| Userland can interact using /dev/ttyGSxxx. |
| endchoice |
| endif |
| |
| # put drivers that need isochronous transfer support (for audio |
| # or video class gadget drivers), or specific hardware, here. |
| config USB_G_WEBCAM |
| tristate "USB Webcam Gadget" |
| depends on VIDEO_V4L2 |
| select USB_LIBCOMPOSITE |
| select VIDEOBUF2_VMALLOC |
| select USB_F_UVC |
| help |
| The Webcam Gadget acts as a composite USB Audio and Video Class |
| device. It provides a userspace API to process UVC control requests |
| and stream video data to the host. |
| |
| Say "y" to link the driver statically, or "m" to build a |
| dynamically linked module called "g_webcam". |
