| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (c) 2014-2016 Christoph Hellwig. |
| */ |
| #include <linux/exportfs.h> |
| #include <linux/iomap.h> |
| #include <linux/genhd.h> |
| #include <linux/slab.h> |
| #include <linux/pr.h> |
| |
| #include <linux/nfsd/debug.h> |
| #include <scsi/scsi_proto.h> |
| #include <scsi/scsi_common.h> |
| #include <scsi/scsi_request.h> |
| |
| #include "blocklayoutxdr.h" |
| #include "pnfs.h" |
| #include "filecache.h" |
| |
| #define NFSDDBG_FACILITY NFSDDBG_PNFS |
| |
| |
| static __be32 |
| nfsd4_block_proc_layoutget(struct inode *inode, const struct svc_fh *fhp, |
| struct nfsd4_layoutget *args) |
| { |
| struct nfsd4_layout_seg *seg = &args->lg_seg; |
| struct super_block *sb = inode->i_sb; |
| u32 block_size = i_blocksize(inode); |
| struct pnfs_block_extent *bex; |
| struct iomap iomap; |
| u32 device_generation = 0; |
| int error; |
| |
| if (seg->offset & (block_size - 1)) { |
| dprintk("pnfsd: I/O misaligned\n"); |
| goto out_layoutunavailable; |
| } |
| |
| /* |
| * Some clients barf on non-zero block numbers for NONE or INVALID |
| * layouts, so make sure to zero the whole structure. |
| */ |
| error = -ENOMEM; |
| bex = kzalloc(sizeof(*bex), GFP_KERNEL); |
| if (!bex) |
| goto out_error; |
| args->lg_content = bex; |
| |
| error = sb->s_export_op->map_blocks(inode, seg->offset, seg->length, |
| &iomap, seg->iomode != IOMODE_READ, |
| &device_generation); |
| if (error) { |
| if (error == -ENXIO) |
| goto out_layoutunavailable; |
| goto out_error; |
| } |
| |
| if (iomap.length < args->lg_minlength) { |
| dprintk("pnfsd: extent smaller than minlength\n"); |
| goto out_layoutunavailable; |
| } |
| |
| switch (iomap.type) { |
| case IOMAP_MAPPED: |
| if (seg->iomode == IOMODE_READ) |
| bex->es = PNFS_BLOCK_READ_DATA; |
| else |
| bex->es = PNFS_BLOCK_READWRITE_DATA; |
| bex->soff = iomap.addr; |
| break; |
| case IOMAP_UNWRITTEN: |
| if (seg->iomode & IOMODE_RW) { |
| /* |
| * Crack monkey special case from section 2.3.1. |
| */ |
| if (args->lg_minlength == 0) { |
| dprintk("pnfsd: no soup for you!\n"); |
| goto out_layoutunavailable; |
| } |
| |
| bex->es = PNFS_BLOCK_INVALID_DATA; |
| bex->soff = iomap.addr; |
| break; |
| } |
| /*FALLTHRU*/ |
| case IOMAP_HOLE: |
| if (seg->iomode == IOMODE_READ) { |
| bex->es = PNFS_BLOCK_NONE_DATA; |
| break; |
| } |
| /*FALLTHRU*/ |
| case IOMAP_DELALLOC: |
| default: |
| WARN(1, "pnfsd: filesystem returned %d extent\n", iomap.type); |
| goto out_layoutunavailable; |
| } |
| |
| error = nfsd4_set_deviceid(&bex->vol_id, fhp, device_generation); |
| if (error) |
| goto out_error; |
| bex->foff = iomap.offset; |
| bex->len = iomap.length; |
| |
| seg->offset = iomap.offset; |
| seg->length = iomap.length; |
| |
| dprintk("GET: 0x%llx:0x%llx %d\n", bex->foff, bex->len, bex->es); |
| return 0; |
| |
| out_error: |
| seg->length = 0; |
| return nfserrno(error); |
| out_layoutunavailable: |
| seg->length = 0; |
| return nfserr_layoutunavailable; |
| } |
| |
| static __be32 |
| nfsd4_block_commit_blocks(struct inode *inode, struct nfsd4_layoutcommit *lcp, |
| struct iomap *iomaps, int nr_iomaps) |
| { |
| loff_t new_size = lcp->lc_last_wr + 1; |
| struct iattr iattr = { .ia_valid = 0 }; |
| int error; |
| |
| if (lcp->lc_mtime.tv_nsec == UTIME_NOW || |
| timespec64_compare(&lcp->lc_mtime, &inode->i_mtime) < 0) |
| lcp->lc_mtime = current_time(inode); |
| iattr.ia_valid |= ATTR_ATIME | ATTR_CTIME | ATTR_MTIME; |
| iattr.ia_atime = iattr.ia_ctime = iattr.ia_mtime = lcp->lc_mtime; |
| |
| if (new_size > i_size_read(inode)) { |
| iattr.ia_valid |= ATTR_SIZE; |
| iattr.ia_size = new_size; |
| } |
| |
| error = inode->i_sb->s_export_op->commit_blocks(inode, iomaps, |
| nr_iomaps, &iattr); |
| kfree(iomaps); |
| return nfserrno(error); |
| } |
| |
| #ifdef CONFIG_NFSD_BLOCKLAYOUT |
| static int |
| nfsd4_block_get_device_info_simple(struct super_block *sb, |
| struct nfsd4_getdeviceinfo *gdp) |
| { |
| struct pnfs_block_deviceaddr *dev; |
| struct pnfs_block_volume *b; |
| |
| dev = kzalloc(sizeof(struct pnfs_block_deviceaddr) + |
| sizeof(struct pnfs_block_volume), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| gdp->gd_device = dev; |
| |
| dev->nr_volumes = 1; |
| b = &dev->volumes[0]; |
| |
| b->type = PNFS_BLOCK_VOLUME_SIMPLE; |
| b->simple.sig_len = PNFS_BLOCK_UUID_LEN; |
| return sb->s_export_op->get_uuid(sb, b->simple.sig, &b->simple.sig_len, |
| &b->simple.offset); |
| } |
| |
| static __be32 |
| nfsd4_block_proc_getdeviceinfo(struct super_block *sb, |
| struct svc_rqst *rqstp, |
| struct nfs4_client *clp, |
| struct nfsd4_getdeviceinfo *gdp) |
| { |
| if (sb->s_bdev != sb->s_bdev->bd_contains) |
| return nfserr_inval; |
| return nfserrno(nfsd4_block_get_device_info_simple(sb, gdp)); |
| } |
| |
| static __be32 |
| nfsd4_block_proc_layoutcommit(struct inode *inode, |
| struct nfsd4_layoutcommit *lcp) |
| { |
| struct iomap *iomaps; |
| int nr_iomaps; |
| |
| nr_iomaps = nfsd4_block_decode_layoutupdate(lcp->lc_up_layout, |
| lcp->lc_up_len, &iomaps, i_blocksize(inode)); |
| if (nr_iomaps < 0) |
| return nfserrno(nr_iomaps); |
| |
| return nfsd4_block_commit_blocks(inode, lcp, iomaps, nr_iomaps); |
| } |
| |
| const struct nfsd4_layout_ops bl_layout_ops = { |
| /* |
| * Pretend that we send notification to the client. This is a blatant |
| * lie to force recent Linux clients to cache our device IDs. |
| * We rarely ever change the device ID, so the harm of leaking deviceids |
| * for a while isn't too bad. Unfortunately RFC5661 is a complete mess |
| * in this regard, but I filed errata 4119 for this a while ago, and |
| * hopefully the Linux client will eventually start caching deviceids |
| * without this again. |
| */ |
| .notify_types = |
| NOTIFY_DEVICEID4_DELETE | NOTIFY_DEVICEID4_CHANGE, |
| .proc_getdeviceinfo = nfsd4_block_proc_getdeviceinfo, |
| .encode_getdeviceinfo = nfsd4_block_encode_getdeviceinfo, |
| .proc_layoutget = nfsd4_block_proc_layoutget, |
| .encode_layoutget = nfsd4_block_encode_layoutget, |
| .proc_layoutcommit = nfsd4_block_proc_layoutcommit, |
| }; |
| #endif /* CONFIG_NFSD_BLOCKLAYOUT */ |
| |
| #ifdef CONFIG_NFSD_SCSILAYOUT |
| static int nfsd4_scsi_identify_device(struct block_device *bdev, |
| struct pnfs_block_volume *b) |
| { |
| struct request_queue *q = bdev->bd_disk->queue; |
| struct request *rq; |
| struct scsi_request *req; |
| /* |
| * The allocation length (passed in bytes 3 and 4 of the INQUIRY |
| * command descriptor block) specifies the number of bytes that have |
| * been allocated for the data-in buffer. |
| * 252 is the highest one-byte value that is a multiple of 4. |
| * 65532 is the highest two-byte value that is a multiple of 4. |
| */ |
| size_t bufflen = 252, maxlen = 65532, len, id_len; |
| u8 *buf, *d, type, assoc; |
| int retries = 1, error; |
| |
| if (WARN_ON_ONCE(!blk_queue_scsi_passthrough(q))) |
| return -EINVAL; |
| |
| again: |
| buf = kzalloc(bufflen, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| rq = blk_get_request(q, REQ_OP_SCSI_IN, 0); |
| if (IS_ERR(rq)) { |
| error = -ENOMEM; |
| goto out_free_buf; |
| } |
| req = scsi_req(rq); |
| |
| error = blk_rq_map_kern(q, rq, buf, bufflen, GFP_KERNEL); |
| if (error) |
| goto out_put_request; |
| |
| req->cmd[0] = INQUIRY; |
| req->cmd[1] = 1; |
| req->cmd[2] = 0x83; |
| req->cmd[3] = bufflen >> 8; |
| req->cmd[4] = bufflen & 0xff; |
| req->cmd_len = COMMAND_SIZE(INQUIRY); |
| |
| blk_execute_rq(rq->q, NULL, rq, 1); |
| if (req->result) { |
| pr_err("pNFS: INQUIRY 0x83 failed with: %x\n", |
| req->result); |
| error = -EIO; |
| goto out_put_request; |
| } |
| |
| len = (buf[2] << 8) + buf[3] + 4; |
| if (len > bufflen) { |
| if (len <= maxlen && retries--) { |
| blk_put_request(rq); |
| kfree(buf); |
| bufflen = len; |
| goto again; |
| } |
| pr_err("pNFS: INQUIRY 0x83 response invalid (len = %zd)\n", |
| len); |
| goto out_put_request; |
| } |
| |
| d = buf + 4; |
| for (d = buf + 4; d < buf + len; d += id_len + 4) { |
| id_len = d[3]; |
| type = d[1] & 0xf; |
| assoc = (d[1] >> 4) & 0x3; |
| |
| /* |
| * We only care about a EUI-64 and NAA designator types |
| * with LU association. |
| */ |
| if (assoc != 0x00) |
| continue; |
| if (type != 0x02 && type != 0x03) |
| continue; |
| if (id_len != 8 && id_len != 12 && id_len != 16) |
| continue; |
| |
| b->scsi.code_set = PS_CODE_SET_BINARY; |
| b->scsi.designator_type = type == 0x02 ? |
| PS_DESIGNATOR_EUI64 : PS_DESIGNATOR_NAA; |
| b->scsi.designator_len = id_len; |
| memcpy(b->scsi.designator, d + 4, id_len); |
| |
| /* |
| * If we found a 8 or 12 byte descriptor continue on to |
| * see if a 16 byte one is available. If we find a |
| * 16 byte descriptor we're done. |
| */ |
| if (id_len == 16) |
| break; |
| } |
| |
| out_put_request: |
| blk_put_request(rq); |
| out_free_buf: |
| kfree(buf); |
| return error; |
| } |
| |
| #define NFSD_MDS_PR_KEY 0x0100000000000000ULL |
| |
| /* |
| * We use the client ID as a unique key for the reservations. |
| * This allows us to easily fence a client when recalls fail. |
| */ |
| static u64 nfsd4_scsi_pr_key(struct nfs4_client *clp) |
| { |
| return ((u64)clp->cl_clientid.cl_boot << 32) | clp->cl_clientid.cl_id; |
| } |
| |
| static int |
| nfsd4_block_get_device_info_scsi(struct super_block *sb, |
| struct nfs4_client *clp, |
| struct nfsd4_getdeviceinfo *gdp) |
| { |
| struct pnfs_block_deviceaddr *dev; |
| struct pnfs_block_volume *b; |
| const struct pr_ops *ops; |
| int error; |
| |
| dev = kzalloc(sizeof(struct pnfs_block_deviceaddr) + |
| sizeof(struct pnfs_block_volume), GFP_KERNEL); |
| if (!dev) |
| return -ENOMEM; |
| gdp->gd_device = dev; |
| |
| dev->nr_volumes = 1; |
| b = &dev->volumes[0]; |
| |
| b->type = PNFS_BLOCK_VOLUME_SCSI; |
| b->scsi.pr_key = nfsd4_scsi_pr_key(clp); |
| |
| error = nfsd4_scsi_identify_device(sb->s_bdev, b); |
| if (error) |
| return error; |
| |
| ops = sb->s_bdev->bd_disk->fops->pr_ops; |
| if (!ops) { |
| pr_err("pNFS: device %s does not support PRs.\n", |
| sb->s_id); |
| return -EINVAL; |
| } |
| |
| error = ops->pr_register(sb->s_bdev, 0, NFSD_MDS_PR_KEY, true); |
| if (error) { |
| pr_err("pNFS: failed to register key for device %s.\n", |
| sb->s_id); |
| return -EINVAL; |
| } |
| |
| error = ops->pr_reserve(sb->s_bdev, NFSD_MDS_PR_KEY, |
| PR_EXCLUSIVE_ACCESS_REG_ONLY, 0); |
| if (error) { |
| pr_err("pNFS: failed to reserve device %s.\n", |
| sb->s_id); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static __be32 |
| nfsd4_scsi_proc_getdeviceinfo(struct super_block *sb, |
| struct svc_rqst *rqstp, |
| struct nfs4_client *clp, |
| struct nfsd4_getdeviceinfo *gdp) |
| { |
| if (sb->s_bdev != sb->s_bdev->bd_contains) |
| return nfserr_inval; |
| return nfserrno(nfsd4_block_get_device_info_scsi(sb, clp, gdp)); |
| } |
| static __be32 |
| nfsd4_scsi_proc_layoutcommit(struct inode *inode, |
| struct nfsd4_layoutcommit *lcp) |
| { |
| struct iomap *iomaps; |
| int nr_iomaps; |
| |
| nr_iomaps = nfsd4_scsi_decode_layoutupdate(lcp->lc_up_layout, |
| lcp->lc_up_len, &iomaps, i_blocksize(inode)); |
| if (nr_iomaps < 0) |
| return nfserrno(nr_iomaps); |
| |
| return nfsd4_block_commit_blocks(inode, lcp, iomaps, nr_iomaps); |
| } |
| |
| static void |
| nfsd4_scsi_fence_client(struct nfs4_layout_stateid *ls) |
| { |
| struct nfs4_client *clp = ls->ls_stid.sc_client; |
| struct block_device *bdev = ls->ls_file->nf_file->f_path.mnt->mnt_sb->s_bdev; |
| |
| bdev->bd_disk->fops->pr_ops->pr_preempt(bdev, NFSD_MDS_PR_KEY, |
| nfsd4_scsi_pr_key(clp), 0, true); |
| } |
| |
| const struct nfsd4_layout_ops scsi_layout_ops = { |
| /* |
| * Pretend that we send notification to the client. This is a blatant |
| * lie to force recent Linux clients to cache our device IDs. |
| * We rarely ever change the device ID, so the harm of leaking deviceids |
| * for a while isn't too bad. Unfortunately RFC5661 is a complete mess |
| * in this regard, but I filed errata 4119 for this a while ago, and |
| * hopefully the Linux client will eventually start caching deviceids |
| * without this again. |
| */ |
| .notify_types = |
| NOTIFY_DEVICEID4_DELETE | NOTIFY_DEVICEID4_CHANGE, |
| .proc_getdeviceinfo = nfsd4_scsi_proc_getdeviceinfo, |
| .encode_getdeviceinfo = nfsd4_block_encode_getdeviceinfo, |
| .proc_layoutget = nfsd4_block_proc_layoutget, |
| .encode_layoutget = nfsd4_block_encode_layoutget, |
| .proc_layoutcommit = nfsd4_scsi_proc_layoutcommit, |
| .fence_client = nfsd4_scsi_fence_client, |
| }; |
| #endif /* CONFIG_NFSD_SCSILAYOUT */ |