include/linux/firmware/intel/stratix10-smc.h - hafnium/third_party/linux - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Copyright (C) 2017-2018, Intel Corporation
  */

 #ifndef __STRATIX10_SMC_H
 #define __STRATIX10_SMC_H

 #include <linux/arm-smccc.h>
 #include <linux/bitops.h>

 /**
  * This file defines the Secure Monitor Call (SMC) message protocol used for
  * service layer driver in normal world (EL1) to communicate with secure
  * monitor software in Secure Monitor Exception Level 3 (EL3).
  *
  * This file is shared with secure firmware (FW) which is out of kernel tree.
  *
  * An ARM SMC instruction takes a function identifier and up to 6 64-bit
  * register values as arguments, and can return up to 4 64-bit register
  * value. The operation of the secure monitor is determined by the parameter
  * values passed in through registers.
  *
  * EL1 and EL3 communicates pointer as physical address rather than the
  * virtual address.
  *
  * Functions specified by ARM SMC Calling convention:
  *
  * FAST call executes atomic operations, returns when the requested operation
  * has completed.
  * STD call starts a operation which can be preempted by a non-secure
  * interrupt. The call can return before the requested operation has
  * completed.
  *
  * a0..a7 is used as register names in the descriptions below, on arm32
  * that translates to r0..r7 and on arm64 to w0..w7.
  */

 /**
  * @func_num: function ID
  */
 #define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
 	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
 	ARM_SMCCC_OWNER_SIP, (func_num))

 #define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
 	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
 	ARM_SMCCC_OWNER_SIP, (func_num))

 /**
  * Return values in INTEL_SIP_SMC_* call
  *
  * INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
  * Secure monitor software doesn't recognize the request.
  *
  * INTEL_SIP_SMC_STATUS_OK:
  * FPGA configuration completed successfully,
  * In case of FPGA configuration write operation, it means secure monitor
  * software can accept the next chunk of FPGA configuration data.
  *
  * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
  * In case of FPGA configuration write operation, it means secure monitor
  * software is still processing previous data & can't accept the next chunk
  * of data. Service driver needs to issue
  * INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
  * completed block(s).
  *
  * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
  * There is error during the FPGA configuration process.
  *
  * INTEL_SIP_SMC_REG_ERROR:
  * There is error during a read or write operation of the protected registers.
  *
  * INTEL_SIP_SMC_RSU_ERROR:
  * There is error during a remote status update.
  */
 #define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION		0xFFFFFFFF
 #define INTEL_SIP_SMC_STATUS_OK				0x0
 #define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY		0x1
 #define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED       0x2
 #define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR		0x4
 #define INTEL_SIP_SMC_REG_ERROR				0x5
 #define INTEL_SIP_SMC_RSU_ERROR				0x7

 /**
  * Request INTEL_SIP_SMC_FPGA_CONFIG_START
  *
  * Sync call used by service driver at EL1 to request the FPGA in EL3 to
  * be prepare to receive a new configuration.
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
  * a1: flag for full or partial configuration. 0 for full and 1 for partial
  * configuration.
  * a2-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
  * a1-3: not used.
  */
 #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
 #define INTEL_SIP_SMC_FPGA_CONFIG_START \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)

 /**
  * Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
  *
  * Async call used by service driver at EL1 to provide FPGA configuration data
  * to secure world.
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
  * a1: 64bit physical address of the configuration data memory block
  * a2: Size of configuration data block.
  * a3-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
  * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
  * a1: 64bit physical address of 1st completed memory block if any completed
  * block, otherwise zero value.
  * a2: 64bit physical address of 2nd completed memory block if any completed
  * block, otherwise zero value.
  * a3: 64bit physical address of 3rd completed memory block if any completed
  * block, otherwise zero value.
  */
 #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
 #define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
 	INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)

 /**
  * Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
  *
  * Sync call used by service driver at EL1 to track the completed write
  * transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
  * call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY.
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
  * a1-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
  * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
  * a1: 64bit physical address of 1st completed memory block.
  * a2: 64bit physical address of 2nd completed memory block if
  * any completed block, otherwise zero value.
  * a3: 64bit physical address of 3rd completed memory block if
  * any completed block, otherwise zero value.
  */
 #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
 #define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
 INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)

 /**
  * Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
  *
  * Sync call used by service driver at EL1 to inform secure world that all
  * data are sent, to check whether or not the secure world had completed
  * the FPGA configuration process.
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
  * a1-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
  * INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
  * a1-3: not used.
  */
 #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
 #define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)

 /**
  * Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
  *
  * Sync call used by service driver at EL1 to query the physical address of
  * memory block reserved by secure monitor software.
  *
  * Call register usage:
  * a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
  * a1-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
  * a1: start of physical address of reserved memory block.
  * a2: size of reserved memory block.
  * a3: not used.
  */
 #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
 #define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)

 /**
  * Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
  *
  * For SMC loop-back mode only, used for internal integration, debugging
  * or troubleshooting.
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
  * a1-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
  * a1-3: not used.
  */
 #define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
 #define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)

 /**
  * Request INTEL_SIP_SMC_REG_READ
  *
  * Read a protected register at EL3
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_REG_READ.
  * a1: register address.
  * a2-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
  * a1: value in the register
  * a2-3: not used.
  */
 #define INTEL_SIP_SMC_FUNCID_REG_READ 7
 #define INTEL_SIP_SMC_REG_READ \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)

 /**
  * Request INTEL_SIP_SMC_REG_WRITE
  *
  * Write a protected register at EL3
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_REG_WRITE.
  * a1: register address
  * a2: value to program into register.
  * a3-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
  * a1-3: not used.
  */
 #define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
 #define INTEL_SIP_SMC_REG_WRITE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)

 /**
  * Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
  *
  * Update one or more bits in a protected register at EL3 using a
  * read-modify-write operation.
  *
  * Call register usage:
  * a0: INTEL_SIP_SMC_REG_UPDATE.
  * a1: register address
  * a2: write Mask.
  * a3: value to write.
  * a4-7: not used.
  *
  * Return status:
  * a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
  * a1-3: Not used.
  */
 #define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
 #define INTEL_SIP_SMC_REG_UPDATE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)

 /**
  * Request INTEL_SIP_SMC_RSU_STATUS
  *
  * Request remote status update boot log, call is synchronous.
  *
  * Call register usage:
  * a0 INTEL_SIP_SMC_RSU_STATUS
  * a1-7 not used
  *
  * Return status
  * a0: Current Image
  * a1: Last Failing Image
  * a2: Version | State
  * a3: Error details | Error location
  *
  * Or
  *
  * a0: INTEL_SIP_SMC_RSU_ERROR
  */
 #define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
 #define INTEL_SIP_SMC_RSU_STATUS \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)

 /**
  * Request INTEL_SIP_SMC_RSU_UPDATE
  *
  * Request to set the offset of the bitstream to boot after reboot, call
  * is synchronous.
  *
  * Call register usage:
  * a0 INTEL_SIP_SMC_RSU_UPDATE
  * a1 64bit physical address of the configuration data memory in flash
  * a2-7 not used
  *
  * Return status
  * a0 INTEL_SIP_SMC_STATUS_OK
  */
 #define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
 #define INTEL_SIP_SMC_RSU_UPDATE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)

 /**
  * Request INTEL_SIP_SMC_ECC_DBE
  *
  * Sync call used by service driver at EL1 to alert EL3 that a Double
  * Bit ECC error has occurred.
  *
  * Call register usage:
  * a0 INTEL_SIP_SMC_ECC_DBE
  * a1 SysManager Double Bit Error value
  * a2-7 not used
  *
  * Return status
  * a0 INTEL_SIP_SMC_STATUS_OK
  */
 #define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
 #define INTEL_SIP_SMC_ECC_DBE \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)

 #endif

 /**
  * Request INTEL_SIP_SMC_RSU_NOTIFY
  *
  * Sync call used by service driver at EL1 to report hard processor
  * system execution stage to firmware
  *
  * Call register usage:
  * a0 INTEL_SIP_SMC_RSU_NOTIFY
  * a1 32bit value representing hard processor system execution stage
  * a2-7 not used
  *
  * Return status
  * a0 INTEL_SIP_SMC_STATUS_OK
  */
 #define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
 #define INTEL_SIP_SMC_RSU_NOTIFY \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)

 /**
  * Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
  *
  * Sync call used by service driver at EL1 to query RSU retry counter
  *
  * Call register usage:
  * a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
  * a1-7 not used
  *
  * Return status
  * a0 INTEL_SIP_SMC_STATUS_OK
  * a1 the retry counter
  *
  * Or
  *
  * a0 INTEL_SIP_SMC_RSU_ERROR
  */
 #define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
 #define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
 	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
	/* SPDX-License-Identifier: GPL-2.0 */
	/*
	* Copyright (C) 2017-2018, Intel Corporation
	*/

	#ifndef __STRATIX10_SMC_H
	#define __STRATIX10_SMC_H

	#include <linux/arm-smccc.h>
	#include <linux/bitops.h>

	/**
	* This file defines the Secure Monitor Call (SMC) message protocol used for
	* service layer driver in normal world (EL1) to communicate with secure
	* monitor software in Secure Monitor Exception Level 3 (EL3).
	*
	* This file is shared with secure firmware (FW) which is out of kernel tree.
	*
	* An ARM SMC instruction takes a function identifier and up to 6 64-bit
	* register values as arguments, and can return up to 4 64-bit register
	* value. The operation of the secure monitor is determined by the parameter
	* values passed in through registers.
	*
	* EL1 and EL3 communicates pointer as physical address rather than the
	* virtual address.
	*
	* Functions specified by ARM SMC Calling convention:
	*
	* FAST call executes atomic operations, returns when the requested operation
	* has completed.
	* STD call starts a operation which can be preempted by a non-secure
	* interrupt. The call can return before the requested operation has
	* completed.
	*
	* a0..a7 is used as register names in the descriptions below, on arm32
	* that translates to r0..r7 and on arm64 to w0..w7.
	*/

	/**
	* @func_num: function ID
	*/
	#define INTEL_SIP_SMC_STD_CALL_VAL(func_num) \
	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \
	ARM_SMCCC_OWNER_SIP, (func_num))

	#define INTEL_SIP_SMC_FAST_CALL_VAL(func_num) \
	ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \
	ARM_SMCCC_OWNER_SIP, (func_num))

	/**
	* Return values in INTEL_SIP_SMC_* call
	*
	* INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION:
	* Secure monitor software doesn't recognize the request.
	*
	* INTEL_SIP_SMC_STATUS_OK:
	* FPGA configuration completed successfully,
	* In case of FPGA configuration write operation, it means secure monitor
	* software can accept the next chunk of FPGA configuration data.
	*
	* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY:
	* In case of FPGA configuration write operation, it means secure monitor
	* software is still processing previous data & can't accept the next chunk
	* of data. Service driver needs to issue
	* INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE call to query the
	* completed block(s).
	*
	* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR:
	* There is error during the FPGA configuration process.
	*
	* INTEL_SIP_SMC_REG_ERROR:
	* There is error during a read or write operation of the protected registers.
	*
	* INTEL_SIP_SMC_RSU_ERROR:
	* There is error during a remote status update.
	*/
	#define INTEL_SIP_SMC_RETURN_UNKNOWN_FUNCTION 0xFFFFFFFF
	#define INTEL_SIP_SMC_STATUS_OK 0x0
	#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY 0x1
	#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_REJECTED 0x2
	#define INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR 0x4
	#define INTEL_SIP_SMC_REG_ERROR 0x5
	#define INTEL_SIP_SMC_RSU_ERROR 0x7

	/**
	* Request INTEL_SIP_SMC_FPGA_CONFIG_START
	*
	* Sync call used by service driver at EL1 to request the FPGA in EL3 to
	* be prepare to receive a new configuration.
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_FPGA_CONFIG_START.
	* a1: flag for full or partial configuration. 0 for full and 1 for partial
	* configuration.
	* a2-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK, or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
	* a1-3: not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START 1
	#define INTEL_SIP_SMC_FPGA_CONFIG_START \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_START)

	/**
	* Request INTEL_SIP_SMC_FPGA_CONFIG_WRITE
	*
	* Async call used by service driver at EL1 to provide FPGA configuration data
	* to secure world.
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_FPGA_CONFIG_WRITE.
	* a1: 64bit physical address of the configuration data memory block
	* a2: Size of configuration data block.
	* a3-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
	* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
	* a1: 64bit physical address of 1st completed memory block if any completed
	* block, otherwise zero value.
	* a2: 64bit physical address of 2nd completed memory block if any completed
	* block, otherwise zero value.
	* a3: 64bit physical address of 3rd completed memory block if any completed
	* block, otherwise zero value.
	*/
	#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE 2
	#define INTEL_SIP_SMC_FPGA_CONFIG_WRITE \
	INTEL_SIP_SMC_STD_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_WRITE)

	/**
	* Request INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE
	*
	* Sync call used by service driver at EL1 to track the completed write
	* transactions. This request is called after INTEL_SIP_SMC_FPGA_CONFIG_WRITE
	* call returns INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY.
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE.
	* a1-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
	* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
	* a1: 64bit physical address of 1st completed memory block.
	* a2: 64bit physical address of 2nd completed memory block if
	* any completed block, otherwise zero value.
	* a3: 64bit physical address of 3rd completed memory block if
	* any completed block, otherwise zero value.
	*/
	#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE 3
	#define INTEL_SIP_SMC_FPGA_CONFIG_COMPLETED_WRITE \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)

	/**
	* Request INTEL_SIP_SMC_FPGA_CONFIG_ISDONE
	*
	* Sync call used by service driver at EL1 to inform secure world that all
	* data are sent, to check whether or not the secure world had completed
	* the FPGA configuration process.
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_FPGA_CONFIG_ISDONE.
	* a1-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK, INTEL_SIP_SMC_FPGA_CONFIG_STATUS_BUSY or
	* INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
	* a1-3: not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE 4
	#define INTEL_SIP_SMC_FPGA_CONFIG_ISDONE \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_ISDONE)

	/**
	* Request INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM
	*
	* Sync call used by service driver at EL1 to query the physical address of
	* memory block reserved by secure monitor software.
	*
	* Call register usage:
	* a0:INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM.
	* a1-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
	* a1: start of physical address of reserved memory block.
	* a2: size of reserved memory block.
	* a3: not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM 5
	#define INTEL_SIP_SMC_FPGA_CONFIG_GET_MEM \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_GET_MEM)

	/**
	* Request INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK
	*
	* For SMC loop-back mode only, used for internal integration, debugging
	* or troubleshooting.
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK.
	* a1-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_FPGA_CONFIG_STATUS_ERROR.
	* a1-3: not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK 6
	#define INTEL_SIP_SMC_FPGA_CONFIG_LOOPBACK \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_LOOPBACK)

	/**
	* Request INTEL_SIP_SMC_REG_READ
	*
	* Read a protected register at EL3
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_REG_READ.
	* a1: register address.
	* a2-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
	* a1: value in the register
	* a2-3: not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_REG_READ 7
	#define INTEL_SIP_SMC_REG_READ \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_READ)

	/**
	* Request INTEL_SIP_SMC_REG_WRITE
	*
	* Write a protected register at EL3
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_REG_WRITE.
	* a1: register address
	* a2: value to program into register.
	* a3-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
	* a1-3: not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_REG_WRITE 8
	#define INTEL_SIP_SMC_REG_WRITE \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_WRITE)

	/**
	* Request INTEL_SIP_SMC_FUNCID_REG_UPDATE
	*
	* Update one or more bits in a protected register at EL3 using a
	* read-modify-write operation.
	*
	* Call register usage:
	* a0: INTEL_SIP_SMC_REG_UPDATE.
	* a1: register address
	* a2: write Mask.
	* a3: value to write.
	* a4-7: not used.
	*
	* Return status:
	* a0: INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_REG_ERROR.
	* a1-3: Not used.
	*/
	#define INTEL_SIP_SMC_FUNCID_REG_UPDATE 9
	#define INTEL_SIP_SMC_REG_UPDATE \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_REG_UPDATE)

	/**
	* Request INTEL_SIP_SMC_RSU_STATUS
	*
	* Request remote status update boot log, call is synchronous.
	*
	* Call register usage:
	* a0 INTEL_SIP_SMC_RSU_STATUS
	* a1-7 not used
	*
	* Return status
	* a0: Current Image
	* a1: Last Failing Image
	* a2: Version \| State
	* a3: Error details \| Error location
	*
	* Or
	*
	* a0: INTEL_SIP_SMC_RSU_ERROR
	*/
	#define INTEL_SIP_SMC_FUNCID_RSU_STATUS 11
	#define INTEL_SIP_SMC_RSU_STATUS \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_STATUS)

	/**
	* Request INTEL_SIP_SMC_RSU_UPDATE
	*
	* Request to set the offset of the bitstream to boot after reboot, call
	* is synchronous.
	*
	* Call register usage:
	* a0 INTEL_SIP_SMC_RSU_UPDATE
	* a1 64bit physical address of the configuration data memory in flash
	* a2-7 not used
	*
	* Return status
	* a0 INTEL_SIP_SMC_STATUS_OK
	*/
	#define INTEL_SIP_SMC_FUNCID_RSU_UPDATE 12
	#define INTEL_SIP_SMC_RSU_UPDATE \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_UPDATE)

	/**
	* Request INTEL_SIP_SMC_ECC_DBE
	*
	* Sync call used by service driver at EL1 to alert EL3 that a Double
	* Bit ECC error has occurred.
	*
	* Call register usage:
	* a0 INTEL_SIP_SMC_ECC_DBE
	* a1 SysManager Double Bit Error value
	* a2-7 not used
	*
	* Return status
	* a0 INTEL_SIP_SMC_STATUS_OK
	*/
	#define INTEL_SIP_SMC_FUNCID_ECC_DBE 13
	#define INTEL_SIP_SMC_ECC_DBE \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE)

	#endif

	/**
	* Request INTEL_SIP_SMC_RSU_NOTIFY
	*
	* Sync call used by service driver at EL1 to report hard processor
	* system execution stage to firmware
	*
	* Call register usage:
	* a0 INTEL_SIP_SMC_RSU_NOTIFY
	* a1 32bit value representing hard processor system execution stage
	* a2-7 not used
	*
	* Return status
	* a0 INTEL_SIP_SMC_STATUS_OK
	*/
	#define INTEL_SIP_SMC_FUNCID_RSU_NOTIFY 14
	#define INTEL_SIP_SMC_RSU_NOTIFY \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_NOTIFY)

	/**
	* Request INTEL_SIP_SMC_RSU_RETRY_COUNTER
	*
	* Sync call used by service driver at EL1 to query RSU retry counter
	*
	* Call register usage:
	* a0 INTEL_SIP_SMC_RSU_RETRY_COUNTER
	* a1-7 not used
	*
	* Return status
	* a0 INTEL_SIP_SMC_STATUS_OK
	* a1 the retry counter
	*
	* Or
	*
	* a0 INTEL_SIP_SMC_RSU_ERROR
	*/
	#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
	#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
	INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)